A2N7002K TURCK | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 7
Technical content
Co., Ltd Page v A 2N7002K http://www.ncepower.com NCE Automotive N-Channel Enhancement Mode Power MOSFET G eneral F eatures V DS 60V,I D 0.3A R DS(ON) Ω V GS =4.5V R DS(ON) 2.2 Ω V GS =10V High power and current handing capability Lead free product is acquired Surface mount package ESD Rating HBM 1500V AEC-Q101 qualified Application Automotive application Direct logic-level interface: TTL/CMOS Drivers: relays, solenoids, lamps, hammers,display, memories, transistors, etc. Battery operated systems Solid-state relays Schematic diagram Marking and pin a ssignment SOT-23 top view P ackage M arking A nd O rdering I nformation Device Marking Device Device Package Reel Size Tape width Quantity A 2N7002K SOT-23 Ø 180mm mm 3000 units A bsolute Maximum R atings A =25 unless otherwise noted) Parameter Symbol Limit Unit Drain-Source Voltage V DS V Gate-Source Voltage V GS V Continuous Drain Curren t T J 150 T A I D 0.3 A T A 100 0.19 Drain Current-Pulsed (Note I DM 0.8 A Maximum Power Dissipation P D 0.35 W Operating Junction and Storage Temperature Range T J STG -55 To T hermal Characteristic Thermal Resistance,Junction-to-Ambient (Note R θ JA 350
Co., Ltd Page v A 2N7002K http://www.ncepower.com E lectrical Characteristics A =25 unless otherwise noted) Parameter Symbol Condition Min Typ Max Unit Off Characteristics Drain-Source Breakdown Voltage BV DSS V GS =0V I D =250 μ A V Zero Gate Voltage Drain Current I DSS V DS V,V GS =0V μ A Gate-Body Leakage Current I GSS V GS V,V DS =0V u A V GS V,V DS =0V u A On Characteristics (Note Gate Threshold Voltage V GS(th) V DS GS D =250 μ A 0.7 1.3 1.9 V Drain-Source On-State Resistance R DS(ON) V GS 4.5 I D 0.2 A 1.95 Ω V GS I D 0.3 A 1.8 2.2 Ω Forward Transconductance g FS V DS V,I D 0.2 A 0.1 S D ynamic Characteristics (Note4) Input Capacitance C lss V DS V,V GS =0V, F=1.0MHz PF Output Capacitance C oss PF Reverse Transfer Capacitance C rss 4.2 PF S witching Characteristics (Note Turn-on Delay Time t d(on) V DD V,I D 0.2 A V GS V,R GEN Ω nS Turn-on Rise Time t r nS Turn-Off Delay Time t d(off) nS Turn-Off Fall Time t f nS Total Gate Charge Q g V DS =10V,I D 0.3 V GS =4.5V 1.7 nC D rain-Source D iode Characteristics Diode Forward Voltage (Note V SD V GS =0V,I S 0.2 A V Diode Forward Current (Note I S 0.3 A N otes Repetitive Rating: Pulse width limited by maximum junction temperature. Surface Mounted on FR4 Board, t sec. Pulse Test: Pulse Width 300 μ Duty Cycle 2%. Guaranteed by design, not subject to production
Co., Ltd Page v A 2N7002K http://www.ncepower.com T ypical E lectrical A nd T hermal C haracteristics Vgs Rgen Vin G Vdd Rl Vout S D Figure 1:Switching Test Circuit Vds Drain-Source Voltage (V) Figure Output C haracteristics I D Drain Current m A Figure Drain-Source On-Resistance V IN V OUT 10% 10% 50% 50% PULSE WIDTH INVERTED t d(on) 90% t r t on 90% 10% t off t d(off t f 90% V IN V OUT 10% 10% 50% 50% PULSE WIDTH INVERTED t d(on) 90% 90% t r t on 90% 10% t off t d(off t f 90% Figure 2:Switching Waveforms Vgs Gate-Source Voltage (V) Figure Transfer Characteristics Vgs Gate-Source Voltage (V) Figure Rdson vs Vgs Rdson On Resistance Ω I D Drain Current m A Rdson On Resistance Ω I D Drain Current
Co., Ltd Page v A 2N7002K http://www.ncepower.com Qg Gate Charge (nC) Figure Gate Charge T J -Junction Temperature( Figure Drain-Source On-Resistance Vds Drain-Source Voltage (V) Figure Capacitance vs Vds Vsd Source-Drain Voltage (V) Figure Source-Drain Diode Forward Vds Drain-Source Voltage (V) Figure Safe Operation Area Vgs Gate-Source Voltage (V) Rdson On Resistance Ω C Capacitance (pF) I s Reverse Drain Current m A I D Drain Current
Co., Ltd Page v A 2N7002K http://www.ncepower.com Square Wave Pluse Duration(sec) Figure Normalized Maximum Transient Thermal Impedance r(t), Normalized Effective Transient Thermal Impedance
Co., Ltd Page v A 2N7002K http://www.ncepower.com SOT-23 Package Information N otes All dimensions are in millimeters. Tolerance 0.10mm mil) unless otherwise specified Package body sizes exclude mold flash and gate burrs. Mold flash at the non-lead sides should be less than mils. Dimension L is measured in gauge plane. Controlling dimension is millimeter, converted inch dimensions are not necessarily exact Symbol Dimensions in Millimeters MIN. MAX. A 0.900 1.150 0.000 0.100 0.900 1.050 b 0.300 0.500 c 0.080 0.150 D 2.800 3.000 E 1.200 1.400 2.250 2.550 e 0.950TYP 1.800 2.000 L 0.550REF 0.300 0.500 θ
Co., Ltd Page v A 2N7002K http://www.ncepower.com A ttention Any and all NCE power products described or contained herein do not have specifications that can handle
applications
reliability, such as life-support systems, aircraft's control systems, or other damage. Consult with your NCE power representative nearest you before using any NCE power products described or contained herein in such applications. NCE power assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all NCE power products described or contained herein. Specifications of any and all NCE power products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer s products or equipment. NCE power CO.,LTD. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all NCE power products(including technical data, services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of NCE power CO.,LTD. Information (including circuit diagrams and circuit parameters) herein is for example only it is not guaranteed for volume production. NCE power believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the NCE power product that you intend to use. This catalog provides information as of Sep Specifications and information herein are subject to change without notice.