A1S-017 AEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 1

Technical content

Part No: A1S-017 A1S Series Tilt Switch - Mercury Tilt switches “make” when the electrode is tilted below horizontal and “break” when tilted above the horizontal. Total travel from “make” to “break” is the “Maximum included angle” shown below. The component to which the switch is attached must have a total tilt angle greater than the “Maximum included angle” for proper operation. A1S-017 200606 Specifications are subject to change without notice. E&OE. © American Electronic Components Inc 2006 American Electronic Components Inc., 1101 Lafayette Street, Elkhart, Indiana. USA Tel: +1-574-295-6330 Fax: +1-574-293-8013 Email: sales@aecsensors.com http://www.aecsensors.com Features: * Un-Insulated * Form: NO/NC/SPST/Mount dependent * Angles Referenced from Horizontal * Single Electrode * Hermetically Sealed * Small Package Size * Narrow Included Angle * High Current Capability * Low Contact Resistance * Long Life Must Make / Break Angle * : - 8º / + 8º Maximum included Angle: 8º * Make/break angles are electrode + (above) / - (below) 0° horizontal reference Switch Ratings: Max Switching Voltage 24 VDC Max Switching Current 1A: Tungsten Lamp 1A @13.8 VDC Initial Contact Resistance (Max). Milliohms 30 Stand Off Voltage (contact to contact) 1500 VAC Operating Temperature -38º to 220º F / -38º to 105º C Storage Temperature -40º to 356º F / -40º to 180º C Typical number of operations at specified load 10,000,000 G-Force Activation G-Level/Range N/A Dimensions: Weight per 100pcs. Lbs / Kgs: 0.68 / 0.31 Body Length (less leads). Inches / Millimeters: 0.52 / 13.2 Maximum Diameter. Inches / Millimeters: 0.40 / 10.2 Materials: Lead Wire Type N/A Lead wire length/skive/termination N/A Finish: Tin