A216132A2NNQ ITT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

M–34 Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ittcannon.com Models Available C&K A Series 4 & 5 Tumbler 1-4 Pole Switchlocks Features/Benefits

  • Multi-pole and multi-position
  • Shorting and non-shorting contacts available
  • Low level and power capability
  • PCB mounting Typical Applications
  • Security alarm systems
  • Medical equipment
  • Computer servers Specifications CONTACT RATING: Q contact material: Switch-2.5 AMPS @ 125 V AC; 350 mA @ 125 V DC (UL/CSA). Carry-5 AMPS continuous. See page M-38 for additional ratings. ELECTRICAL LIFE: 15,000 make-and-break cycles at full load up to 300,000 detent operations. CONTACT RESISTANCE: Below 20 m Ω typ. initial @ 2-4 V DC, 100 mA, for both silver and gold plated contacts. INSULATION RESISTANCE: 109 Ω min. DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level. OPERATING TEMPERATURE: –30ºC to 85ºC. INDEXING: 30º: 2-4 positions, 45º or 90º: 2-3 positions. STATIC RESISTANCE: Anti-static models exceed 20 KV DC static resistance @ sea level, lock body to terminals. Materials LOCK: Zinc alloy with stainless steel facing. KEYS: Two nickel plated brass keys with code number. SWITCH HOUSING: Glass filled 6/6 nylon (UL 94V-0). MOVABLE CONTACT: Q contact material: Coin silver, silver plated. See page M-38 for additional contact materials. STATIONARY CONTACTS & TERMINALS: Q contact material: Brass, silver plated. See page L-38 for additional contact materials. MOUNTING NUT: Zinc alloy. DRESS NUT: Brass, nickel plated. LOCKING RING: 6/6 nylon (UL 94V-2). TERMINAL SEAL: Epoxy. NOTE: Any models supplied with Q or B contact material ar e RoHS compliant. For the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs. NOTE: Specifications and materials listed above are for switchlocks with standard options. For information on specific and custom switchlocks, consult Customer Service Center. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages M–35 through M–38. For additional options not shown in catalog, consult Customer Service Center. Switch and lock Function A21613 DP , 30°, keypull pos. 1 A11413 SP , 90°, keypull pos. 1 A31413 3P , 90º, keypull pos. 1 A3141U 3P , 90°, keypull pos. 1 & 2 A11513 SP, 45° , keypull pos. 1 A31513 3P , 45°, keypull pos. 1 A3151U 3P, 45°, keypull pos. 1 & 3 A21582 DP, 45º, keypull pos. 1 A11613 SP, 30°, keypull p05. 1 A1161U SP , 30°, keypull pos. 1 & 4 A12112 SP , 45°, keypull p05. 1 A42112 4P , 45°, keypull pos. 1 Seal NONE No seal E Epoxy seal Keying

2 Two nickel plated brass keys

G 5 Tumbler lock with anti-static switch Y 4 Tumbler lock with anti-static switch Lock Finish

2 Stainless steel facing

1 Nickel plated with

8 Gloss black facing Shorting/Non-Shorting

R With removable dress nut

M–35 Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ittcannon.com MSwitchlock AX161X SWITCH FUNCTION SHOWN = Detent Positions (30º , 45º or 90º ) = Key pull possible in these positions. = Stop Positions LEGEND 3P MODEL4P MODEL SP MODEL (omit terminals B, C & D) DP MODEL (omit terminals B & D) TERMINAL NUMBERS Terminal numbers molded on housing bottom. POS. 1 POS. 1 POS. 1 POS. 1 POS. 1 POS. 1 POS. 1 POS. 1 *NOTE: Switchlock models A114XX, A115XX, A116XX and A12112 with ‘C’ terminations have additional terminal no. 8 as switch support only. This terminal is not connected electrically inside switch. All models with all options when ordered with ‘Q’ contact material. AX14 models not available with ‘S’ shorting contacts. Part number shown: A116132Y2NZNQ C&K A Series 4 & 5 Tumbler 1-4 Pole Switchlocks SWITCH AND LOCK FUNCTION 45ºPosition 1A-2 A-1 A12112 * A42112 SP Positions 1 & 4A-4A-3A-2A-1A1161U *SP Position 1A-4 A-4, C-10 A-3 A-3, C-9 A-2 A-2, C-8 A-1 A-1, C-7 A11613 * A21613 SP DP Position 1A-2, C-8A-5, C-11A-4, C-10A21582DP Positions 1 & 3A-4, B-8, C-12A-2, B-6, C-10A-1, B-5, C-9A3151U3P Position 1A-4 A-4, B-8, C-12 A-2 A-2, B-6, C-10 A-1 A-1, B-5, C-9 A11513 * A31513 SP Positions 1 & 2A-4, B-8, C-12A-1, B-5, C-9A3141U3P Position 1A-4 A-4, B-8, C-12 A-1 A-1, B-5, C-9 A11413 * A31413 SP INDEXING LOCK CONFIGURATION KEY PULL POSITIONS CONNECTED TERMINALS POS. 1 POS. 2 POS. 3 POS. 4MODEL NO. NO. POLES 90º 30º 45º

M–36 Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ittcannon.com C&K A Series 4 & 5 Tumbler 1-4 Pole Switchlocks KEYING LOCK TYPE LOCK FINISH SHORTING/NON-SHORTING 1.635 (41,52) (4 TUMBLER) 1.733 (44,01) (5 TUMBLER) A126 .798 (20,26) .775 (19,68) N NON-SHORTING CONTACTS (break-before-make) S SHORTING CONTACTS (make-before-break)

2 STAINLESS STEEL 1 NICKEL 8 GLOSS BLACK

G 5 TUMBLER LOCK WITH ANTI-STATIC SWITCH Y 4 TUMBLER LOCK WITH ANTI-STATIC SWITCH A 4 TUMBLER LOCK WITH REMOVABLE DRESS NUT NOYES2 NICKEL PLATED BRASS KEYS2 CODE NO. ON LOCK CODE NO. ON KEYKEYING OPTIONS OPTION CODE NOTE: All orders keyed alike, standard. For more than one key code, replacement keys, or other special features, consult Customer Service Center. Key part number: 115140126 Not available with AX23 models. Not available with AX14 models. NOTE: For available option combinations, see page M-38. NOTE: For available option combinations, see page M-38. MOUNTING STYLES N R LOCK TYPES AVAILABLE OPTION COMBINATIONS

  • • ••8
  • • •2
  • •1 MOUNTING STYLES NR LOCK TYPES GAY FINISH OPTIONS AVAILABLE OPTION COMBINATIONS NOTE: Key head shape subject to change without notice.

M–37 Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ittcannon.com MSwitchlock C&K A Series 4 & 5 Tumbler 1-4 Pole Switchlocks TERMINATIONS MOUNTING/LOCK STYLE PANEL MOUNTING 1.036 (26,31) .270 (6,68) PANEL MOUNTING 3P MODEL4P MODEL PC MOUNTING R REMOVABLE DRESS NUT N WITH NUT Z SOLDER LUG C PC THRU-HOLE TYPICAL INSTALLATION Install hex nut with enough clearance to allow for dress nut and panel. Place switch through cutout in rear of panel. Install and tighten dress nut by hand, then tighten hex nut. Always tighten assembly with back of panel hex nut to avoid damaging front of panel. Nut part number: 175050700 SP MODEL (omit terminals B, C ,D) DP MODEL (omit terminals B & D)

M–38 Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ittcannon.com CONTACT MATERIAL SEAL AVAILABLE HARDWARE E EPOXY SEALNONE NO SEAL Switch and Lock Assembly Instructions Mounting Information (All Models) 1. Place lock assembly in mounting hole on panel, secure with mounting nut. 2. Align keying tab on switch assembly with keying slot on lock assembly. 3. Snap assemblies together. 4. Switch installation is permanent. Switch cannot be removed from lock after assembly. Attempting to separate switch and lock may cause damage to switchlock. 1 MOVABLE CONTACT: Copper alloy, with gold plate over nickel plate. STATIONARY CONTACTS & TERMINALS: Brass, with gold plate over nickel plate. 2 MOVABLE CONTACT: Coin silver, silver plated. STATIONARY CONTACTS & TERMINALS: Brass, silver plated (standard with all termination options). All models with all options when ordered with ‘Q’ contact material. Key Code: A126

4 TUMBLER

PART NO. (ONE KEY) 115140126 Material: Brass Finish: Nickel plate Key Code: D001

5 TUMBLER

PART NO. (ONE KEY) 115441001 Material: Brass Finish: Nickel plate PANEL THICKNESS A & Y LOCK TYPES G LOCK TYPES MOUNTING STYLES

  • • •R
  • •• •N LOCK TYPES GAY LOCK FINISHES 128 MOUNTING STYLES AVAILABLE OPTION COMBINATIONS C&K A Series 4 & 5 Tumbler 1-4 Pole Switchlocks MOUNTING/LOCK STYLE * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. CONTACT ANDOPTION CODE TERMINAL MATERIAL RATING Q SWITCH-2.5 AMPS @ 125 V AC; 350 mA @ 125 V DC (UL/CSA). LOW LEVEL/DRY CIRCUITB SILVER 2 POWER 0.4 VA MAX. @ 20 V AC or DC MAX. RoHS COMPLIANT* RoHS COMPATIBLE* YES YES YES YES GOLD 1 CARRY-5 AMPS CONTINUOUS.