960ACDR GAPTEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 1 of 5 960ACDR_SC – Rev. 2017-1.1 Specifications subject to change without notice. 960ACDR_SC Series 960W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated Industrial DIN Rail Power Supply High efficiency up to 94% Universal AC input range (85~264VAC) Support 1+1 or N+1 redundant system Built-in current sharing function Built-in current limiting circuit Over voltage protection (OVP) Over load protection (OLP) Short circuit protection (SCP) Over temperature prot. (OTP) Wide operating ambient temperature (-25°C~70°C) 150% (360W) peak load capacity Easy fuse tripping due to high overload current AC-DC Converter 960 Watt The 960ACDR_SC series features standard rail mounting, energy efficiency and is highly cost-effective. The series offers stability and high noise immunity especially for industrial control equipment, machinery and other demanding environments for industri al equipment. This converter offers a compact and light weight design with and standard rail installation (32mm). Furthermore this series offers Easy Fuse Tripping due and a built-in DC OK relay contact. The converter can be installed on TS-35/7.5 or TS-35/15. Example: 960ACDR_24SC 960= 960 Watts AC= AC/DC DR= Din Rail 24= Vout S= Single Output C= PFC (Power Factor Correction) Input specifications Input voltage range 85~264VAC, 220-370VDC Input frequency 47~63Hz Power factor 100VAC

  • 0.99 (typ) 230VAC
  • 0.98 (typ) AC current 100VAC
  • 11A (max) 230VAC
  • 5A (max) Inrush current Cold start 100VAC
  • 30A (typ) 230VAC
  • 60A (typ) Leakage current ≤1.18mA/2.82mA TN- TT-mains/IT- mains (264Vac input, 50Hz) Output specifications Item Test conditions Min Typ Max Units Output voltage accuracy Full load ±3 % Voltage adjustment range 24~28V Line regulation ±0.5 % Load regulation ±1 % Ripple + Noise see model specifications table Set-up time • @230VAC
  • @100VAC s s Hold-up time @230VAC, full load 20 ms Overshoot and undershoot 5 % Switching frequency 100 KHz Protection specifications Over-load protection 110%~150% of rated current, constant current limiting for some time (150% of rated current, last 3S) then PS stop working for 7S, after 7S, if the load <=rated current, PS will work normally, auto recovery Over-voltage protection 29~33V, hiccup mode, auto recovery Over-temperature protection 115±5°C, detect on temperature controller; shut down O/P, auto recovery after temperature goes down. Common specifications Short circut protection: Long-term mode, automatic recovery Temperature rise at full load: 40°C MAX Cooling: Free air convection Operation temperature range: -25°C~+70°C Storage temperature range: -40°C ~+85°C Storage humidity range: < 95% Temperature coefficient: 0.03%/°C MAX MTBF (using MIL-HDBK-217F): +25°C >300,000 hours Safety standards: meet UL508, UL60950, EN60950 Power boost: 150% of rated current Parallel function: support DC-OK: V On: when output voltage is up to 90% of rated output voltage V Off: when output voltage is down to 85% of rated output voltage DC-OK relay contact rating: Max 30V/1A or 60V/0.3A or 30Vac/0.3A resistive load DC-OK LED: Green Over load LED: Red, when output voltage goes down to 85% of rated voltage, overload LED flickers. When output voltage goes up to 90% of rated voltage, overload LED goes out. Shut down signal: Remote shut down output voltage Remote control output voltage: Remote control/adjust output voltage Case material: Heat-resistant Plastic (UL94-V0) and metal Dimensions (L*W*H): 140*124.6*138.2mm Weight: 2500g Note: 1. All parameters NOT specially mentioned are measured at rated input, rated load and 25°C of ambient temperature. Isolation specifications Item Test condition Min Typ Max Units Withstand voltage* • Primary-Sec. ≤20mA
  • Primary-PG ≤20mA
  • Secondary-PG ≤40mA 3000 2500 500 VAC Isolation resistance 10 MΩ * Input-Output, tested for 1 minute, 500VDC and leakage current less than 1mA

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 2 of 5 960ACDR_SC – Rev. 2017-1.1 Specifications subject to change without notice. 960W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated Industrial DIN Rail Power Supply 960ACDR_SC Series Mechanical dimensions LED light LED DC OK Relay contact Normal condition Green On During extra power Green On Overload(Hiccup mode) Red, flicker Off Short circuit Red, flicker Off Over temp. shut down Red, flicker Off Active remote shut down input Red, flicker Off No input OFF Off EMC specifications EMC / Emission Compliance to EN55022, EN55024, FCC PART 15 Class A EMC / Harmonic current Compliance to EN61000-3-2, CLASS A EMC / Immunity Compliance to EN61000-4-2, -3, -4, -5, -6, -11; heavy industry level The power supply is considered as a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. Approval Model Power [W] Output [Vo, VDC] Rated Current [A] Current Range [A] Ripple&Noise* [mV, max] 0~70°C -25°C Efficiency [%, typ] UL (pending) 960ACDR_24SC 960 24 40 0~40 240 480 94.4 * Measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1 uF & 10uF parallel capacitor. 960ACDR_SC

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 3 of 5 960ACDR_SC – Rev. 2017-1.1 Specifications subject to change without notice. 960W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated Industrial DIN Rail Power Supply 960ACDR_SC Series Shut down signal input Input/output terminal DC-OK,shut-down Type Spring connector Spring connector Solid wire 0.5-6mm2 0.15-1.5mm2 Strand wire 0.5-4mm2 0.15-1.5mm2 Wire Spec AWG20-10 AWG26-14 Max wire diameter 2.8mm 1.5mm Stripping length 7mm 7mm Screwdriver / 3mm Straight Screwdriver (open spring) This function allows a signal or external voltage to shut down output voltage. Under shut down condition, output voltage<2V and output power<0.5W. When parallel using, the voltage must be <1V between V- terminal blocks of different units. Mark: if select C, please don’t use limited diodes. This function can adjust output voltage, type: 18~28Vdc. Remote control output voltage

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 4 of 5 960ACDR_SC – Rev. 2017-1.1 Specifications subject to change without notice. 960W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated Industrial DIN Rail Power Supply 960ACDR_SC Series Typical characteristics Functional block diagram Output current vs. ambient temperature – 960ACDR_24SC Ambient temperature (°C) Load (A) Functional diagram

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 5 of 5 960ACDR_SC – Rev. 2017-1.1 Specifications subject to change without notice. 960W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated Industrial DIN Rail Power Supply 960ACDR_SC Series Mounting method instruction 960ACDR_24SC Mounting A Mounting B Mounting C Mounting D Mounting E A1 is recommended output current. A2 is the allowed max output current (PSU lifetime is around half of A1).