320ACP GAPTEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 1 of 4 320ACP_SCF – Rev. 2019-1.1 Specifications subject to change without notice. 320ACP_SCF Series 320W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated High efficiency up to 87.5% Universal AC input range (85~264VAC) Built-in Active PFC function, PF>0.95 Over power protection (OPP) Over load protection (OLP) Short circuit protection (SCP) Wide operating ambient temperature (-20°C~65°C) Operating altitude up to 5000M 100% full load burn-in test Withstand 300Vac surge input for 5s PCB soldering side with conformal coating AC-DC Converter 320 Watt The 320ACP_SCF series features standard rail mounting, energy efficien- cy and is highly cost-effective. The series offers stability and high noise immunity especially for industrial control equipment, machinery and other demanding environments for industri al equipment. This converter offers a compact and light weight design with and standard rail installa- tion (35mm). Furthermore this series offers Easy Fuse Tripping due and a built-in DC OK relay contact. The converter can be installed on TS-35/7.5 or TS-35/15. Example: 320ACP_24SCF 320= 320Watt AC= AC-DC P= series 24= 24 Vout S= Single Output C= PFC (Power Factor Correction) F= Fan Input specifications Input voltage range 90~264VAC, 120Vdc~370Vdc Input frequency 47~63Hz Power factor 120VAC

  • 0.98 (typ) 230VAC
  • 0.95 (typ) AC current 4.5A (max) Inrush current Cold start 110VAC
  • 30A (typ) 220VAC
  • 50A (typ) Leakage current (input 264Vac, 63Hz) Input—output: ≤0.25mA Input—PG: ≤3.5mA Output specifications Item Test conditions Min Typ Max Units Output voltage accuracy Full load
  • 12V
  • 24V/36V/48V Voltage adjustment range
  • 12V
  • 24V
  • 36V
  • 48V V V V V Line regulation Vin= min. to max. at full load ±0.5 % Load regulation 0% to 100% load
  • 12V
  • 24V/36V/48V Set-up time • @230VAC input
  • @120VAC input s s Hold-up time @full load 10 ms Overshoot and undershoot 5 % Switching fre- quency

100 KHz

  • Measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated Protection specifications Over-load protection
  • 12V: 27~35A
  • 24V: 14.5~19A
  • 48V: 7.3~10A Protection type: Hiccup mode, auto recovery Over-power protection
  • 12V: 324~420W
  • 24V: 358~456W
  • 36V: 336~480W
  • 48V: 350~180W Protection type: Hiccup mode, auto recovery Common specifications Short circut protection: Long-term mode, automatic recovery Temperature rise at full load: 40°C MAX Cooling: Free air convection Operation temperature range: -20°C~+65°C Storage temperature range: -40°C ~+85°C Storage humidity range: < 95% Vibration: 10~500Hz, 2G 10min./1cycle, period for60min. each along X,Y, Z axes Temperature coefficient: 0.03%/°C MAX MTBF (using MIL-HDBK-217F): +25°C >200,000 hours Power boost: 150% of rated current Parallel function: support Safety standards: UL60950-1 2nd Ed; IEC 60950-1:2005(2nd Ed); EN60950-1:2006 Case material: Heat-resistant Plastic (UL94-V0) and metal Dimensions: 199*99*50mm Weight: 816.7g pending Isolation specifications Item Test condition Min Typ Max Units Withstand voltage* • Primary-Sec.: 10mA
  • Primary-PG: 10mA
  • Secondary-PG 3000 1500 500 VAC Isolation resistance 10 MΩ * Input-Output, tested for 1 minute, 500VDC and leakage current less than 1mA Note: 1. All parameters NOT specially mentioned are measured at rated input, rated load and 25°C of ambient temperature.

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 2 of 4 320ACP_SCF – Rev. 2019-1.1 Specifications subject to change without notice. 320W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated 320ACP_SCF Series Mechanical dimensions EMC specifications EMC / Conduction & Radiation Compliance to EN55022, EN55024, FCC PART 15 Class B EMC / Immunity Compliance to EN61000-4-2, -3, -4, -5, -6, -8, -11 The power supply is considered as a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. Approval Model Power [W] Output [Vo, VDC] Rated Current [A] Current Range [A] Ripple&Noise* [mV, typ] 0~65°C -20~0°C Efficiency [%, min] UL (pending) 320ACP_12SCF 320 12 25 0~25 200 250 84.5 UL (pending) 320ACP_24SCF 320 24 13 0~13 150 200 87 UL (pending) 320ACP_36SCF 320 36 8.9 0~8.9 200 200 86.5 UL (pending) 320ACP_48SCF 320 48 6.7 0~6.7 150 200 87.5

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 3 of 4 320ACP_SCF – Rev. 2019-1.1 Specifications subject to change without notice. 320W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated 320ACP_SCF Series Typical characteristics Derating Curve Derating Curve 320ACP_12SCF 320ACP_24SCF AMBIENT TEMPERATURE (°C) AMBIENT TEMPERATURE (°C) LOAD (%)LOAD (%) Efficiency Efficiency INPUT VOLTAGE (VAC) INPUT VOLTAGE (VAC) LOAD (%)LOAD (%) Functional block diagram Functional diagram

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 4 of 4 320ACP_SCF – Rev. 2019-1.1 Specifications subject to change without notice. 320W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated 320ACP_SCF Series Typical characteristics Load-Ambient Derating Curve Load-Input Derating Curve Derating Curve 320ACP_36SCF 320ACP_48SCF AMBIENT TEMPERATURE (°C) AMBIENT TEMPERATURE (°C) LOAD (%)LOAD (%) Efficiency INPUT VOLTAGE (VAC) INPUT VOLTAGE (VAC) LOAD (%)LOAD (%)