9330 LEACH | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 6
Technical content
RELAY – NONLATCH
10 AMP, 2PDT
(714) 736-7598 • leachcorp.com • LINA.CustomerService@LeachCorp.com The technical information provided by Leach International Corporation is to be used as a guide only, and is not meant for publication or as documentation for altering any existing specification. Dimensions are in inches unless otherwise specified. Rev. 5/2019.
- Balanced armature, nonlatching hermetically sealed relay
- Contact arrangement
2 PDT
- Coil Supply Alternating current
- Qualified to the performance standards of MIL-PRF-6106
- Available in SPACE and Hi-REL quality PRINCIPLE TECHNICAL CHARACTERISTICS
- Contacts rated at
28 Vdc; 115 Vac, 400 Hz, 1 Ø
115/200 Vac, 400 Hz, 3 Ø
- Weight 0.44 lbs. max
- Dimensions 1.62 x 2.50 x 2.60 in. max
- Balanced-force design, all welded construction
- Hermetically sealed, corrosion protected metal can
- No make before break
- Special models available upon request Application Notes: 101 102 103D 007 CONTACT ELECTRICAL CHARACTERISTICS Contact rating per pole and load type [1] Load current in Amps
28 VDC 115 Vac
400 Hz, 3Ø
1 & 3 Ø [2] Resistive 10 10 10 6 Inductive [7] 10 10 10 4 Motor 6 6 6 3 Lamp 2 2 2 1.5
RELAY – NONLATCH COIL CHARACTERISTICS (Vdc) GENERAL CHARACTERISTICS Unless otherwise noted, the specified temperature range applies to all relay characteristics. COIL DATA Vdc 115 Vac
400 Hz [3]
Vdc [4] Nominal operating voltage 28 115 28 Maximum operating voltage 30 124 30 Maximum Pick-up voltage @ +125° C 18 90 18 Drop-out voltage, max 7 30 7 Coil resistance Ω ± 10% at +25° C 160 - 160 Coil current max. mA at +25° C - 55 - Temperature range -70°C to +125°C Minimum operating cycles (life) at rated load 50,000 Minimum operating cycles (life) at 25% rated load 200,000 Dielectric strength at sea level all points All circuits to ground and circuit to circuit 1,500 Vrms / 50 Hz Coil to ground 1,250 Vrms Dielectric strength at altitude 80,000 ft 700 Vrms / 50Hz Insulation resistance (at 500 Vdc) 100 M Ω min Sinusoidal vibration (55-1500 Hz) 10 G Shock (6-9 millisecond duration) 25 G Maximum contact opening time under shock and vibration 10 μs Operate time at nominal voltage 20 ms max Release time at nominal voltage DC 20 ms max AC 50 ms max Contact bounce at nominal voltage N.C. Contacts 2 ms max N.O. Contacts 2 ms max Overload and rupture 4 and 5 times rated load
RELAY – NONLATCH Tolerances, unless otherwise specified XXX ± .010 XX ± .03
RELAY – NONLATCH
RELAY – NONLATCH
RELAY – NONLATCH
- Standard intrmediate current test applicable. 2. Values beyond applicable military specification requirements. 3. May be used on 115 Vac, 60 Hz if maximum ambient temperature is limited to +85° C. 4. P/N 9330-10374 has back EMF coil suppression to 42 Vdc. 5. Mounting holes "A" to be used when replacing AN3311. 6. Applicable Military specification. 28 Vdc MS24149-D1 : Leach Part No. 9330-4026 115 Vac MS24149-A1 : Leach Part NO. 9330-4027 7. Inductive load life is 20 percent of rated resistive load life. For any inquiries, please contact your local sales representative: leachcorp.com