9207 | DigiCamel IC Datasheet

Online Datasheet

Read 9207 online.

9207 LEACH | Alldatasheet

Document overview

Manufacturer or author: npinto
PDF pages: 8

Technical content

100 AMP

(714) 736-7598 • leachcorp.com • LINA.CustomerService@LeachCorp.com The technical information provided by Leach International Corporation is to be used as a guide only, and is not meant for publication or as documentation for altering any existing specification. Dimensions are in inches unless otherwise specified. Rev. 4/2019.

Rotary Design Power Contactor
Designed to the performance standards of MIL-PRF-6106 PRINCIPLE TECHNICAL CHARACTERISTICS
Contacts rated at 28 Vdc; 115 Vac, 60/400 Hz, 1Ø 115/200 Vac, 60/400 Hz, 3Ø
Weight 1.75 lbs. max
Dimensions 3.62 in x 3.62 in x 2.87 in
Special units available upon request including models with auxiliary contacts. Application Notes: 103G CONTACT ELECTRICAL CHARACTERISTICS Contact rating per pole and load type [1] Load current in Amps

28 Vdc 115 Vac

115 Vac

440 Vac

Resistive 100 100 50 100 50 50 Inductive 100 100 50 100 50 Motor [3] 100 100 50 100 50

COIL CHARACTERISTICS (Vdc) GENERAL CHARACTERISTICS Unless otherwise noted, the specified temperature range applies to all relay characteristics. CODE Vdc 115 Vac 400 Hz 115 Vac 60 Hz Nominal operating voltage 28 115 115 Maximum operating voltage 29 124 124 Pick-up voltage, max 18 95 95 Drop-out voltage, max 7 35 30 Coil resistance ohms ±10% at +25° C 44.5 - - Coil current max. mA at +25° C - 200 200 Temperature range -55°C to +85°C Minimum operating cycles (life) at rated load 50,000 Minimum operating cycles (life) at 25% rated load 100,000 Dielectric strength at sea level All circuits to ground and circuit to circuit 1,500 Vrms Coil to ground 1,250 Vrms Dielectric strength at altitude 50,000 ft. 500 Vrms Insulation resistance (at 500 Vdc) minimum 100 M Ω min Sinusoidal vibration (55-500 Hz) 10G Shock (6-9 millisecond duration) 50G Maximum contact opening time under shock or vibration 2 μs Operate time at nominal voltage DC 30 ms max Release time at nominal voltage DC 30 ms max AC 50 ms max Weight, max. 1.75 lb

[1] Defense Supply Center Columbus. [2] See page three and four for configurations and schematics. [3] Motor load inrush limited to 400 Amp. [4] Contact factory for auxiliary contact ratings STANDARD ITEMS

28 VDC 115 VAC/400 Hz 115 VAC/60 Hz

1 PST-N.O. AUX 9207 3 PST-DM 1 PST-N.O. AUX 9207-4990 3 PST-DM 9207-8053 2 PDT-DB-DM 9207-3881 3 PST-DM 1 PST-N.O. AUX 9207-10217 2 PDT-DB-DM 9207-10207 3 PST-DM 9207-4521 3 PST-DM 1 PST-N.C. AUX CONFIGURATION LEACH PART NO. 84192-001 28 VDC 3 PST-DM 9207-10332 84192-002 115 VAC 60 Hz 3 PST-DM 9207-10333 84192-003 28 VDC 3 PST-DM; 1 PST-N.O. Aux 9207-10334 84192-004 115 VAC 60 Hz 3 PST-DM; 1 PST-N.O. Aux 9207-10335 84192-005 115 VAC 60 Hz 2 PDT-DB-DM 9207-10336 84192-006 28 VDC 3 PST-DM; 1 PST-N.C. AUX 9207-10337 84192-007 28 VDC 3 PST-DM 9207-10338 84192-008 28 VDC 2 PDT-DB-DM 9207-10339 84192-009 28 VDC 3 PST-DM; 1 PST-N.O. AUX 9207-10340 84192-010 28 VDC 3 PST-DM; 1 PST-N.C. AUX 9207-10341 84192-011 115 VAC 400 Hz 3 PST-DM 9207-10342 84192-012 115 VAC 60 Hz 3 PST-DM; 1 PST-N.O. AUX 9207-10343 84192-013 115 VAC 400 Hz 3 PST-DM; 1 PST-N.O. AUX 9207-10344 84192-014 115 VAC 400 Hz 2 PDT-DB-DM 9207-10345 84192-015 115 VAC 400 Hz 3 PST-DM; 1 PST-N.C. AUX 9207-10346

Standard Terminal Hardware Per Applicable Stud #8-32 UNC-2A Stud MS35649-282 Nut MS35338-42 Lockwasher AN960-8L Washer #1/4-28 UNC-2A Stud AN316-4R Nut MS35338-44 Lockwasher AN960-416L Flat Washer MS35338-41 Lockwasher AN960-6 Washer Dimensions in inches Tolerances, unless otherwise specified, XX ±.03; .XXX ±.010

Product Information

9207 specifications and overview.

Summary

POWER CONTACTOR 100 AMP

Description

POWER CONTACTOR 100 AMP

Source title 9207 Datasheet(PDF) - Leach International Corporation

Related Parts

More parts from the same family.

Browse manufacturer