9201-05-00 RHOPOINT | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Rhopoint Components Ltd Fax: +44 (0) 1883 712938 Phone: +44 (0) 1883 717988 web: www.rhopointcomponents.com e-mail: sales@rhopointcomponents.com 9200-9300 Series/Surface Mount Reed Relays SSSSSURFURFURFURFURFAAAAACECECECECE M M M M MOUNTOUNTOUNTOUNTOUNT R R R R REEDEEDEEDEEDEED R R R R RELAELAELAELAELAYSYSYSYSYS Ideally suited to the needs of Automated Test Equipment, Instrumentation and Telecommunications requirements, Coto’s 9200, and 9300 Series specification tables allow you to select the appropriate relay for your particular application. If your requirements differ, please consult your local representative or Coto’s Factory to discuss a custom design. SSSSSERIESERIESERIESERIESERIES F F F F FEAEAEAEAEATURESTURESTURESTURESTURES u High Insulation Resistance - 1012 Ω minimum (1013 Ω Typical). u High reliability, hermetically sealed contacts for long life. u Molded thermoset body on integral lead frame design. u High speed switching compared to electromechanical relays.
9200 Ser9200 Ser9200 Ser9200 Ser9200 Ser iesiesiesiesies
u Low profile - 0.19” height. Meets high board density requirements. u 50 Ω Coaxial Shield for RF and Fast Rise Time Pulse switching.
9300 Ser9300 Ser9300 Ser9300 Ser9300 Ser iesiesiesiesies
u Load switching (15 Watts) and high dielectric strength (500 VDC) between contacts. Dimensions in Inches (Millimeters) Model 9200 Model 9300 Gull Wing Gull Wing Axial J-LeadJ-Lead Radial Axial
Rhopoint Components Ltd Fax: +44 (0) 1883 712938 Phone: +44 (0) 1883 717988 web: www.rhopointcomponents.com e-mail: sales@rhopointcomponents.com Model Number 9201 9202 9301 Parameters Test Conditions Units 1 Form A 1 Form A COIL SPECS. Nom. Coil Voltage VDC 5 12 5 12 5 12 Coil Resistance +/- 10%, 25° C Ω 250 650 150 650 350 1000 CONTACT RATINGS Switching Voltage Max DC/Peak AC Resist. Volts 200 200 200 Switching Current Max DC/Peak AC Resist. Amps 0.5 0.5 0.5 Carry Current Max DC/Peak AC Resist. Amps 1.5 1.5 1.5 Contact Rating Max DC/Peak AC Resist. Watts 10 10 15 Life Expectancy-Typical 1 Signal Level 1.0V,10mA x 106 Ops. 1000 1000 250 Static Contact Dynamic Contact Resistance (max. init.) 0.5V, 50mA at 100 Hz, 1.5 msec Ω 0.200 0.200 0.200 RELAY SPECIFICATIONS Insulation Resistance (minimum) Between all Isolated Pins at 100V, 25°C, 40% RH Ω x 10 12 x 1012 x 1012 Capacitance - Typical Across Open Contacts No Shield Shield Floating Shield Guarding pF pF pF 0.7 0.8 0.1 0.7 Open Contact to Coil No Shield Shield Floating Shield Guarding pF pF pF 1.4 1.4 0.2 1.4 Contact to Shield Contacts Open, Shield Floating pF - 1.4 - Dielectric Strength (minimum) Between Contacts Contacts to Shield Contacts/Shield to Coil VDC/peak AC VDC/peak AC VDC/peak AC 300 1500 300 1500 1500 x 500 1500 Operate Time - including bounce - Typical At Nominal Coil Voltage, 30 Hz Square Wave msec. 0.40 0.40 0.40 Release Time - Typical Zener-Diode Suppression4 msec. 0.10 0.10 0.10
1 For m A
50 Ω Coaxial 9200-9300 Series/Surface Mount Reed Relays Environmental Ratings Storage Temp: -35°C to +100°C; Operating Temp: -20°C to +85°C The operate and release voltage and the coil resistance are specified at 25°C. These values vary by approximately 0.4%/°C as the ambient temperature varies. Vibration: 20 G’s to 2000 Hz; Shock: 50 G’s Notes: 1Consult factory for life expectancy at other switching loads. 2Surface mount component processing temperature: 430°F(221°C) max for 1 minute dwell time. Temperature measured on leads where lead exits molded package. 3Higher dielectric strength available, consult factory. 4Consists of 20V Zener-diode and 1N1002 diode in series, connected in parallel with coil. Top View: Dot stamped on top of relay refers to pin #1 location