3167730 TABOR | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
1 | For more information or to schedule a demo call today, or visit out website www.taborelec.com The 9x60A-DST is a bench-top, 2U, half 19” rack size, fully metal case, single or dual channel DC coupled wideband amplifier designed for high frequency, high current, signal amplification. While target applications include piezo-electronics, transducer characterization, MEMS, general electronics and scientific applications, with a high bandwidth of 45MHz, 34Vp-p into 50 ohms and up to 10W output power and a peak output current of 1A, the 9x60A-DST is the ideal complimentary amplifier to any signal source that needs a supporting power boost for demanding applications. High output current to drive up to 1A Low signal distortion High amplitude to 34Vp-p into 50Ω Compatible with any of the Tabor waveform generators 45MHz bandwidth Fast transition time of <10ns Input Characteristics There are three inputs for each channel: 1. Main input, which is located on the front panel and is normally used for signal inputs. 2. Auxiliary input, which is located on the rear panel and can be used as a summing input. 3. DC Offset input, which is located on the rear panel and can be used for offsetting signal level within the specified output level window. Auxiliaries The 9x60A-DST has two additional inputs for each channel allowing summation of two signals and providing an external control of DC level offset. These inputs are accessible from the rear panel only. Instrument Configuration The 9x60A-DST can be configured to be used as two, single-ended independent channels, or as a one input with two differential outputs. The 9x60A’s standard configuration enables a maximum output voltage of 34Vp-p into 50 ohms with a gain of x10. Other custom gain, such as x15 can be ordered at the time of the purchase, enabling clients’ even wider variety of choices to solve their application. Output Characteristics The outputs are located on the front panel. There are two outputs, one for each channel. When the 9x60A-DST is configured as two separate amplifiers, the outputs generate amplified signals within the range of 34Vp-p into matching load impedance at approximately 45MHz bandwidth. 9160A/9260A-DST 34Vp-p Single / Dual Channel Signal Amplifier
2 | For more information or to schedule a demo call today, or visit out website www.taborelec.com 9160A/9260A-DST 34Vp-p Single / Dual Channel Signal AmplifierSpecifications CONFIGURATION 9160A-DST 1 single-ended output 9260A-DST 2 single-ended outputs; 1 differential output OUTPUT CHARACTERISTICS Connectors: Front panel BNCs Source Impedance: 0Ω Coupling: DC Protection: Short-circuit & Thermal Gain: x10, fixed Polarity: Normal Amplitude: 34Vp-p into matching impedance SQUARE WAVE CHARACTERISTICS Transition Time: <10ns Aberrations: <10% SINE WAVE CHARACTERISTICS Bandwidth: -3dB Frequency Range: DC to 45MHz Harmonics Distortion:10Vp-p 25Vp-p (typ) 1MHz: <-65dBc <-54dBc 10MHz: <-50dBc <-45dBc 30MHz: <-38dBc <-30dBc INPUT CHARACTERISTICS MAIN INPUT Connector: Front panel BNCs Impedance: 50Ω Coupling: DC Damage Level: 12Vp-p (-6V to +6V peaks) Differential Accuracy:4% INPUT AUXILIARY Connector: Rear panel BNCs Impedance: 50Ω Coupling: DC Damage Level: 12Vp-p (-6V to +6V peaks) INPUT AUXILIARY Connector: Rear panel BNCs Impedance: 10kΩ Coupling: DC Damage Level: ±2V Accuracy: 7% GENERAL Voltage: 85VAC to 265VAC Power Consumption: 50W max. Dimensions (WxHxD): With Feet 315 x 102 x 395 mm Without Feet 315 x 88 x 395 mm Weight: Without Package 3.5 Kg Shipping Weight 5 Kg Temperature: Operating 0°C to +40°C Storage -40°C to +70°C Warm up time: 30 minutes Humidity: 85% , non-condensing Safety: CE Marked, IEC61010-1:2010 EMC: IEC 61326-1:2013 Calibration: 1 years Warranty: 1 year
ORDERING INFORMATION
9160A-DST 34Vp-p Single Channel Signal Amplifier 9260A-DST 34Vp-p Dual Channel Signal Amplifier Disclaimer. The contents of this document are provided by Tabor Electronics, 'as is'. Tabor makes no representations nor warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to the specification at any time without notice.