90HBW02PRT GRAYHILL | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

.020 ± .002 (0,51 ± 0,05) TYP. .052 ± .002 (1,32 ± 0,13) TYP. .085 ± .005 (2,54 ± 0,13) TYP. C L C L LENGTH ± .010 (0,25) SEE CHART .160 ± .005 (4,19 ± 0,13) .220 (5,59) MAX. .085 ± .005 (2,16 ± 0,13) TYP. .020 ± .002 (0,51 ± 0,05) TYP. .100 ± .010 (2,54 ± 0,25) TYP. C L C L .320 (8,13) MAX. .290 (7,37) MAX. .012 ± .001 (0,30 ± 0,03) TYP. .250 ± .010 (6,35 ± 0,25) .290 (7,37) MAX. .012 ± .002 (0,30 ± 0,05) .395 ± .010 (10,03 ± 0,25) LENGTH ± .010 (0,25) SEE CHART .160 ± .005 (4,19 ± 0,13) .190 (4,83) MAX. .004 (0,10) .004 (0,10) SWITCH IS PACKAGED AS SHOWN HERE WITH ALL POSITIONS ON .350 (8,90) TYP. .150 (3,81) TYP. .100 (2,54) TYP. .100 (2,54) TYP. .070 (1,78) TYP. C L C L .500 (12,7) TYP. .250 (6,35) TYP. .125 (3,18) TYP. .100 (2,54) TYP. .070 (1,78) TYP. C L C L SerieS 90HB SPST, Low Profile

FeATUreS

  • Compatible with SMT Assembly, Including Infrared Reflow and Vapor-Phase
  • Reliable Spring and Ball Contact DIMENSIONS In inches (and millimeters) Top View–Gull Wing CIRCuITRy As viewed from the top of the switch in the positions shown in the drawing. Recommended PC Pad Dimensions–Gull Wing Recommended PC Pad Dimensions–J-Bend Gull Wing J-Bend DiP Surface Mount DIP Switches Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • uSA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com DIP Switches

Terminal Style: W = Gull Wing, J = J-Bend RoHS compliant 90HBW02PRT Packaging: R = Tape and reel packaging (750 switches/reel) Blank = Tube packaging (each tube is 19.5" long) Seal: P = Polyimide Seal Blank = No Seal Number of Positions: 02 through 10 Surface Mount DIP Switches Meets requirements of EIA 481-2 or EIA 481-3 Each reel has a 15.750 inch (390 mm) minimum leader and a 6.30 inch (160 mm) minimum trailer. TAPE AND REEL PACkAGING

13 INCH

32 & 44mm TAPE 16mm PIN ONE LOCATION CONDUCTIVE PLASTIC EMBOSSED TAPE SpecificationS electrical Ratings Make-and-break current Rating: 2,000 operations per switch position at these resistive loads:10 mA, 30 Vdc; or 10 mA, 50 mVdc; 10 mA, 50 mVdc; or 25 mA, 24 Vdc; or 100 mA,6 Vdc. contact Resistance: (measured at 10 mA, 50 mVdc). Initial: 20 mohms maximum, After Life: 100 mohms maximum insulation Resistance: Minimum, at 100 Vdc between adjacent closed contacts and also across open switch contacts. initial (Mohms): 5,000, After Life (Mohms): 1,000 Dielectric Strength: Minimum voltage (AC RMS) measured between adjacent closed contacts and also across open switch contacts. lnitial: 500 volts, After Life: 500 volts current carry Rating: 3A maximum rise of 20°C Switch capacitance: 2 pF at 1 megahertz Mechanical Ratings Where Grayhill performance is superior, the MIL spec is listed in parentheses. Mechanical Life: 2,000 operations per switch position Vibration Resistance: Per Method 204, Test Condition B , 1mS opening (10 mS allowed) Mechanical Shock: Per Method 213, Test Condition A. 1mS opening (10 mS allowed) thermal Shock Resistance: Per specification; no failures; passes contact resistance. terminal Strength: Per specification thermal aging: 1,000 hours at 85°C; no failures. environmental Ratings Meets all requirements of MIL- S-83504**. operating temperature Range: -40°C to + 85°C Storage temperature Range: -40°C to + 85°C Moisture Resistance: Per MIL-STD-202, Method 106. Soldering information Solderability: Per MIL-STD-202, Method 208 Soldering Heat Resistance: Per MIL-S-83504, six second test. Recommended processing temperature: 220°C–230°C (1 pass—260°C maximum) processing position: Switch is to be processed with all actuators in the closed (on) position as shipped. fluxing: Per EIA RS-448-2 with flux touching switch body. cleaning: Passes immersion test using water/ detergent. Acceptable solutions include 1-1-1 trichlorethane, freon, (TF, TE, or TMS), isopropyl alcohol, detergent (140°F maximum). Terpene acceptable for Series 90 only. Solutions which are not recommended include acetone, methylene chloride, freon TMC. High pressure aqueous cleaning is not recommended. Materials and finishes Shorting Member (Ball): Brass, gold-plate over nickel barrier. Base contacts: Copper alloy, gold-plate over nickel barrier. terminals: Copper alloy, matte tin plated over nickel barrier. non-conductive parts: Thermoplastic (uL94V-O) tape and Reel packaging tape Seal integrity: Passes gross leak test using 125°C flourinert for 20 seconds minimum. Reference MIL-STD-202, Method 112 tape Seal: Polyimide film

oRDeRing infoRMation

Available from your local Grayhill Distributor. For prices and discounts, contact a local Sales Office, an authorized local Distributor or Grayhill. ** Note: 100% matte tin terminal plating does not meet MIL-S-83504 for lead content. No. of Length Length Number Positions Inches Metric Per Tube 2 .270" 6,9 mm 60 3 .370" 9,4 mm 47 4 .470" 11,9 mm 37 5 .570" 14,5 mm 31 6 .670" 17,0 mm 26 7 .770" 19,6 mm 23 8 .870" 22,1 mm 20 9 .970" 24,6 mm 18 10 1.070" 27,2 mm 16 DiP DIP Switches Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • uSA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com