62AG22-L0-020C GRAYHILL | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com Optical and Mechanical Encoders Optical Encoders SerieS 62AG Price Competitive Solution DiMeNSiONS in inches (and millimeters) Unless otherwise specified, standard tolerances are: Linear ± .025 Diameter ± .010 Angle ± 2.0 0

FeATUreS

Over 1 million rotational cycles• 2-bit gray code output • Quadrature coding• Available in 16 detent positions• 4 inch cable/connector assembly • RoHS compliant• Optional integrated pushbutton• Patented light pipe technology• Cost competitive with • mechanical encoders at higher volumes

APPLiCATiONS

Automotive • - audio systems - navigation systems Medical• - patient monitoring systems Test & Measurement • - analyzers - oscilloscopes Audio & Video• - consumer electronics - professional editing equipment .312 7,92[ ][.687] [ 17,45 ] .250 [6,35] .580 [14,73] .500 [12,7] .066 ±.002 [1,68 ] .152 ±.002 [3,86 ] Ø SHAFT .249 ±.002 6,32 ][ .219 ±.004 5,56 ][ .512 13[ ].532 ±.015 13,51 ][ 4.00±.200 [101,6] CONNECTOR IS AMP P/N 7-215083-6 OR EQUIVALENT 3/8-32 UNEF-2A THREAD THREADS TO BE WITHIN .030 [0,76] OF SHOULDER NOTE: GRAYHILL ALLOWS MULTIPLE ORIENTATIONS FOR THE GRAYHILL TEXT ON THE BACKPLATE.

Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com Optical Encoders WAVeFOrM AND TrUTH TABLe Available from your local Grayhill Distributor. For prices and discounts, contact a local sales office, an authorized distributor, or Grayhill. POWER (+5.0 V) OUTPUT A OUTPUT B GROUND PUSHBUTTON PUSHBUTTON *EXTERNAL 10k PULL-UP RESISTORS REQUIRED FOR OPERATION HIGH LOW HIGH LOW OUTPUT A OUTPUT B POS. POS. POS. POS. POS. POS. POSITION OUTPUT A OUTPUT B INDICATES LOGIC HIGH; BLANK INDICATES LOGIC LOW. CODE REPEATS EVERY FOUR POSITIONS. *CLOCKWISE SHAFT ROTATION SPeCiFiCATiONS environmental Specifications Operating Temperature range: -40°C to 85°C Storage Temperature: -40°C to 85°C Humidity: 96 Hours at 90-95% humidity at 40°C Mechanical Vibration: Harmonic motion with amplitude of 15g within a varied frequency of 10 to 2000 Hz for 12 hours Mechanical Shock Test 1: 100g for 6 ms half-sine wave with a velocity change of 12.3 ft/s. Test 2: 100g for 6 ms sawtooth wave with a velocity change of 9.7 ft/s. rotary electrical and Mechanical Specifications Operating Voltage: 5.00±0.25 Vdc Supply Current: 30 mA maximum at 5 Vdc. Logic Output Characteristics: Logic high shall be no less than 3.0 VdcLogic low shall be no greater than 1.0 Vdc Minimum sink current: 0.5 mA for 5 Vdc. (Preliminary) Power Consumtpion: 150 mW maximum for 5 Vdc Output: Open Collector Phototransistor Optical rise Time: 30ms maximum. Optical Fall Time: 30ms maximum. Average rotational Torque: Low = 2.0±1.4 in-oz initially. High = 3.5±1.4 in-oz initially. 50% of initial value after 1 million cycles. Mechanical Life: 1,000,000 cycles of operation. 1 cycle is a rotation through all positions and a full return. Mounting Torque: 15in-lbs. maximum Shaft Pushout Force: 45 lbs. minimum Terminal Strength: 15 lbs. Cable pull out force minimum Solderability: 95% free of pin holes and voids Maximum rotational speed: 100 rpm. Pushbutton electrical and Mechanical Specifications rating: 10 mA @ 5 Vdc Contact resistance: <10 Ω (Compatible with CMOS or TTL) Life: 1 million actuations minimum Contact Bounce: <4 ms make, <10ms break Actuation Force: 510±150 grams Shaft Travel: .017 ± .008 INCH Materials and Finishes Bushing: Zamak 2 Shaft: Zamak 2 Detent rotor: Reinforced Nylon Zytel 70G33L UL 94 Detent Spring: 303 Stainless Steel Housing, Upper: Nylon 6/6 25% glass reinforced. Zytec FR-50 Light Pipe: Lexan, GE Code rotor: Delrin 100 Housing, Lower: Nylon 6/6 25% glass reinforced. Zytec FR-50 Pushbutton Actuator: Reinforced nylon. Zytel 70G33L. UL 94 Pushbutton Dome: Stainless Steel Printed Circuit Board: NEMA Grade FR4, Double clad with copper, Plated with gold over nickel infrared emitting Diode: Gallium Arsenide Phototransistor Diode: NPN Silicon resistor: Metal oxide on ceramic substrate Spacer: Pet plastic Backplate: Stainless Steel Label: TT406 thermal transfer cast film. Solder: 96.5% tin / 3% silver / 0.5% copper. No clean. Hex Nut: Brass, Plated with nickel Lockwasher: Stainless steel Cable: Copper Stranded with topcoat in PVC insulation Connector (.050 center): PA4.6 with tin/nickel plated phosphor bronze. 62AGXX-XX-XXXX Series Rotational Torque Option: L = Low Torque, H = High Torque Angle of Throw: 22 = 22.5° for code change and 16 detent positions 18 = 18° for code change and 20 detent positions Cable Length: Pushbutton Option: 0 = No pushbutton, 5 = 510 grams, 9 = 950 grams Termination: C = .050 Center Ribbon Cable with connector, S = .050 Center Ribbon Cable with .100 stripped end, P = .050 Center Pins with 0.185 inch length