86153 MALLORY | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Figure 1 Pickup Bracket Assembly. Important: Read the instructions before attempting the installation Parts Included 1 - Trigger Wheel 2 - Bolts, 3/8" - 16 x 1.5" 1 - Pickup Mount 2 - Bolts, 5/16"- 24 x 1.25” 1 - Centering Ring 3 - Bolts, 3/8" - 24 x 1” 1 - Non Magnetic Pickup 2 - 5/16" Washers Assembly, PN 8276 4 - Spacers 1 - Mount Retainer Tech Bulletin #104 1 - Locknut Note: On some vehicles the MSD Crank Trigger Kit may require slight modifications to accommodate special engine plates, pulley systems, etc. INSTALLING THE PICKUP AND BRACKET 1. Install the pickup mount onto the bracket using the two fine thread bolts (Figure 1). The mount retainer will only install one way, do not try to force the bolts in. Hand tighten the bolts. 2. Install the bracket onto the engine. The bracket is designed to be used on either side of the balancer. Be sure to use the correct length bolts and spacers in the proper locations. 3. Install the pickup and locknut into the holder. Do not tighten the locknut at this time. INSTALLING THE TRIGGER WHEEL The trigger wheel is designed so it can be used on engines with a dry sump oiling system as well as stock dampers. Two centering rings are included; one for use on stock or most aftermarket dampers and one for use with a dry sump pump drive mandrel (Figure 2). Flying Magnet Crank Trigger Kit Chevrolet Small Block Engines PN 8610/86103 7" Wheel, PN 8615/86153 8" Wheel MSD • WWW.MSDPERFORMANCE.COM • (915) 857-5200 • FAX (915) 857-3344 ONLINE PRODUCT REGISTRATION: Register your MSD product online. Registering your product will help if there is ever a warranty issue with your product and helps the MSD R&D team create new products that you ask for! Go to www.msdperformance.com/registration.