8226 MALLORY | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
ial . v LJ v MSD Blaster GM Dual Connector Coil PN 8226 ONLINE PRODUCT REGISTRATION: Register your MSD product online. Registering your product will help if there is ever a warranty issue with your product and helps the MSD R&D team create new products that you ask for! Go to www.msdperformance.com/registration. IMPORTANT: Read these instructions before attempting the installation. Parts Included: 1 - Blaster GM Dual Connector Coil 1 - Parts Bag WARNING: During installation, disconnect the battery cables. When disconnecting the battery, always remove the Negative cable first and install it last. The MSD Blaster GM Coil is designed to produce increased voltage and energy over the stock GM Coil. To get even more ignition performance, | install an MSD Ignition Control with a PN 8876 Harness for a direct plug- na S in installation. BU SF es R S Zam 1. Disconnect the stock coil connectors and the spark plug wire. Ri CA 2. Remove the factory coil. It may be necessary to remove the factory ~ LJ coil bracket to drill the rivets out to remove the stock coil. =i > 3. Install the MSD GM Coil and mount it with the supplied hardware. eileen 4. Plug in the wiring connectors and the coil wire. rs Figure 1 Connecting the MSD Blaster GM Dual Connector Coil. MSD - WWW.MSDPERFORMANCE.COM + (915) 857-5200 - FAX (915) 857-3344
. . v v v et MSD TO GM HARNESS PN 8876 <9 ame CD J Ra nS ss Nw | f\\ {\\ 4 ns Me fh B ° ef e y zy HEAVY RED © @ TO BATTERY ivf RED ral fir ORANGE BLACK HEAVY. BLACK (© TO BATTERY FASC — oom |“S2 = Za Sun a =
0 SSS
Msp BLASTER Gray TACH OUTPUT CONNECTOR COIL VIOLET (+) [| GREEN () PN 8226 uf MAGNETIC PICKUP (NOT USED) Figure 2 Installation of an MSD 6 Series Ignition, PN 8876 Harness and Coil. Service In case of malfunction, this MSD component will be repaired free of charge according to the terms of the warranty. When returning MSD components for warranty service, Proof of Purchase must be supplied for verification. After the warranty period has expired, repair service is based on a minimum and maximum fee. All returns must have a Return Material Authorization (RMA) number issued to them before being returned. To obtain an RMA number please contact MSD Customer Service at 1 (888) MSD-7859 or visit our website at www.msdperformance.com/rma to automatically obtain a number and shipping information. When returning the unit for repair, leave all wires at the length in which you have them installed. Be sure to include a detailed account of any problems experienced, and what components and accessories are installed on the vehicle. The repaired unit will be returned as soon as possible using Ground shipping methods (ground shipping is covered by warranty). For more information, call MSD at (915) 855-7123. MSD technicians are available from 7:00 a.m. to 5:00 p.m. Monday - Friday (mountain time). Limited Warranty MSD warrants this product to be free from defects in material and workmanship under its intended normal use*, when properly installed and purchased from an authorized MSD dealer, for a period of one year from the date of the original purchase. This warranty is void for any products purchased through auction websites. If found to be defective as mentioned above, it will be repaired or replaced at the option of MSD. Any item that is covered under this warranty will be returned free of charge using Ground shipping methods. This shall constitute the sole remedy of the purchaser and the sole liability of MSD. To the extent permitted by law, the foregoing is exclusive and in lieu of all other warranties or representation whether expressed or implied, including any implied warranty of merchantability or fitness. In no event shall MSD or its suppliers be liable for special or consequential damages. *Intended normal use means that this item is being used as was originally intended and for the original application as sold by MSD. Any modifications to this item or if it is used on an application other than what MSD markets the product, the warranty will be void. It is the sole responsibility of the customer to determine that this item will work for the application they are intending. MSD will accept no liability for custom applications. MSD - WWW.MSDPERFORMANCE.COM - (915) 857-5200 + FAX (915) 857-3344 ©2014 MSD LLC FRM32477 Revised 05/14 Printed in China