8060 ITT | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 10
Technical content
A–50 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ittcannon.com C&K 8060 Series Alternate Action and Momentary Pushbutton Switches Features/Benefits
- Long travel
- Available with LED
- Long life contact design
- Epoxy terminial seal compatabile with bottom wash cleaning
- RoHS compliant models available Typical Applications
- Instrumentation
- Computers and peripherals
- Telecommunications and networking equipment Specifications CONTACT RATING: Q contact material: 6 AMPS @ 120 V AC or 28 V DC; 3 AMPS @ 250 V AC. See page A-57 for additional ratings. ELECTRICAL LIFE: 50,000 make-and-break cycles at full load. CONTACT RESISTANCE: Below 20 mΩ typ. initial @ 2-4 V DC, 100 mA, for both silver and gold plated contacts. INSULATION RESISTANCE: 109Ω min. DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level. OPERATING TEMPERATURE: –30ºC to 65ºC SOLDERABILITY: Per MIL-STD-202F method 208D, or EIA RS-186E method 9 (1 hour steam aging). CAP INSTALLATION FORCE: 10 lbs. maximum permissible. NOTE: Any models supplied with P , R, S, Q, B or G contact material are RoHS compliant. For the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Materials CASE: Glass filled nylon 6/6 or diallyl phthalate (DAP), flame retardant (UL 94V-0). PLUNGER: S, S1, S2 Options: Glass filled nylon or glass filled polyester (PBT) (UL 94V-0). L, L1 Options: Brass, nickel plated. CAP & FRAME: Nylon, black standard. BUSHING: Brass or zinc, nickel plated. HOUSING: Stainless steel. SWITCH SUPPORT: Brass or steel, matte-tin plated. END CONTACTS: Q contact material: Coin silver, silver plated. See page A-57 for additional contact materials. CENTER CONTACT & ALL TERMINALS: Q contact material: Copper alloy, silver plated. See page A-57 for additional contact materials. TERMINAL SEAL: Epoxy. Refer to soldering and cleaning in Technical Data Chapter. HARDWARE: Nut & Locking Ring: Brass, nickel plated; Lockwasher: Steel, nickel plated. Build-A-Switch To order, simply select desired option from each category and place in the appr opriate box. Available options are shown and described on pages A-51 thru A-59. For additional options not shown in catalog, consult Customer Service Center. All models have epoxy terminal seal and are compatible with all “bottom-wash” PCB cleaning methods. Switch Function
8161 SPDT On-On
8168 SPDT On-Mom.
8261 DPDT On-On
S .710" high plunger with .375" dia. cap J80 Snap-in J81 Snap-in with frame J82 Snap-in with frame for LED J86 Snap-in with frame & LED L .740" high plunger with .395" dia. cap L1 .740" high plunger with .590" dia. cap S1 .615" high plunger with .200" dia. cap S2 .710" high plunger with .310" dia. cap Bushing H .300" high, flat, hi torque H9 .300" high, flat, hi torque NONE No bushing choice required Y3 7.6mm, keyway Contact Material B Gold K Gold, tin-lead P Gold, matte-tin Q Silver M Silver, tin-lead S Silver, matte-tin G Gold over silver L Gold over silver, tin-lead R Gold over silver, matte-tin Seal E Epoxy I Epoxy potted base Cap Color
2 Black
1 White
3 Red
4 Orange
5 Yellow
9 Gray
A Right angle, PC thru-hole AV2 Vertical right angle, PC thru-hole C PC Thru-hole Z Solder lug A3 Right angle, snap-in, PC thru-hole AV3 Vertical right angle, snap-in, PC thru-hole V3 .460" high, V-bracket V4 .630" high, V-bracket V6 .460" high, V-bracket V21 .555" high, snap-in V-bracket V31 .460" high, snap-in V-bracket W .750" long, wire wrap Z3 Quick connect APushbutton
A–51 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ittcannon.com Third Angle Projection C&K 8060 Series Alternate Action and Momentary Pushbutton Switches SWITCH FUNCTION PANEL MOUNTING PANEL MOUNTING PANEL MOUNTING ACTUATOR—SNAP-IN FRONT MOUNT DPDT 2-1,5-42-3,5-6ONON8261DP SPDT 2-1 2-1 2-3 2-3 ON MOM. ON ON 8161 8168 SP SCHEMATIC CONNECTED TERMINALS POS. 1 POS. 2 SWITCH FUNCTION POS. 1 POS. 2 MODEL NO. NO. POLES SPDT DPDT Terminal Nos. For Reference Only Terminal Nos. For Reference Only Part number shown: 8161SHZQE Part number shown: 8261SHZQE MOM. = Momentary Cap Finish: matte. Other colors available, consult Customer Service Center. Available with C, W, Z or Z3 terminations. NOTE: Caps & frames available separately, see pages A-58 and A-59. *Increase this dimension to thick panels. *Increase this dimension to thick panels. All models with all options when ordered with G, L, M or Q contact material. C&K marking this side C&K marking this side J81 SNAP-IN WITH BLACK FRAME ACTUATOR OR PLUNGER CAP COLOR APushbutton
A–52 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ittcannon.com Third Angle Projection C&K 8060 Series Alternate Action and Momentary Pushbutton Switches ACTUATOR—SNAP-IN FRONT MOUNT ACTUATOR—SNAP-IN FRONT MOUNT PANEL MOUNTING * Increase this dimension to thick panels. 8161J86ZQE223 SPDT LED not included. For LED information, see page A-59. NOTE: Caps & frames available separately, see pages A-58 and A-59. Other colors available, consult Customer Service Center. Available with C, W, Z or Z3 terminations. NOTE: Caps & frames available separately, see pages A-58 and A-59. Other colors available, consult Customer Service Center. Available with C, W, Z or Z3 terminations and SPDT models only. For LED information, see page A-59. ACTUATOR OR PLUNGER CAP COLOR ACTUATOR OR PLUNGER CAP COLOR LED COLOR J86 SNAP-IN WITH BLACK FRAME AND LED J82 SNAP-IN WITH BLACK FRAME FOR LED APushbutton
A–53 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ittcannon.com Third Angle Projection C&K 8060 Series Alternate Action and Momentary Pushbutton Switches PLUNGER BUSHING 1/4±40 UNS-2A NONE NO BUSHING CHOICE REQUIRED (JXX ACTUATORS) Y3 7.6mm THREADED, KEYWAY H9 .300" HIGH UNTHREADED, FLAT H .300" HIGH THREADED, FLAT L1 PLUNGER WITH CAP P/N 8940L PLUNGER WITH CAP P/N 8941 S2 PLUNGER WITH CAP P/N 8018S1 PLUNGER WITH CAP P/N 7089S PLUNGER WITH CAP P/N 7527 NOTE: When selecting plunger and cap option, bushing selection must also be made, see below. Withstands 12 in./lbs. of torque with no distortion. H bushing standard with C, W, Z or Z3 terminations. H9 bushing standard with A, A3, AV2, AV3, or V3-V31 terminations. Withstands 12 in./lbs. of torque with no distortion. Cap Finish: gloss. Cap supplied not installed. Other colors available, consult Customer Service Center. NOTE. Two mounting nuts, locking ring and lockwasher supplied standard with threaded bushings. Optional mounting nut and locking ring styles and finishes available, see section “Technical Data and Additional Hardware”. NOTE: When selecting bushing option, plunger selection must also be made, see above. No bushing option choice required when any JXX actuator option is selected. ACTUATOR OR PLUNGER CAP COLOR APushbutton
A–54 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ittcannon.com C&K 8060 Series Alternate Action and Momentary Pushbutton Switches TERMINATIONS SECTION A-A .130 (3,3) .138 (3,51) PC MOUNTING PC MOUNTING .750 (19,05) A RIGHT ANGLE, PC THRU- HOLE A3 RIGHT ANGLE, SNAP-IN, PC THRU-HOLE W WIRE WRAP C PC THRU-HOLE Z3 QUICK CONNECT Z SOLDER LUG SPDT and DPDT SPDT and DPDT SPDT and DPDT SPDT and DPDT 8161SH9ABE2 SPDT Not available with P , S, R, K, L, or M contact material. Mating quick connector available; order part number 530100000, page A-59. Not available with P , S, R, K, L, or M contact material. Not available with I seal. Terminal bend radii and lead-in manufacturing option. NOTE: PC pattern must clear switch support leg. Third Angle Projection APushbutton
A–55 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ittcannon.com Third Angle Projection C&K 8060 Series Alternate Action and Momentary Pushbutton Switches TERMINATIONS PC MOUNTING SECTION A-A PC MOUNTING AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150" PITCH AV3 VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE, .150" PITCH A RIGHT ANGLE, PC THRU-HOLE 8161SH9AV2BE2 SPDT 8261SH9ABE2 DPDT A3 RIGHT ANGLE, SNAP-IN, PC THRU-HOLE Not available with I seal. Terminal bend radii and lead-in manufacturing option. Not available with I seal. Terminal bend radii and lead-in manufacturing option. APushbutton
A–56 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ittcannon.com Third Angle Projection C&K 8060 Series Alternate Action and Momentary Pushbutton Switches TERMINATIONS SECTION A-A PC MOUNTING PC MOUNTING PC MOUNTING Not available with I seal. Not available with I seal. Not available with I seal. Terminal bend radii and lead-in manufacturing option. V21 VERTICAL MOUNT, V-BRACKET, SNAP-IN V6 VERTICAL MOUNT, V-BRACKET V21 VERTICAL MOUNT, V-BRACKET, SNAP-IN V6 VERTICAL MOUNT, V-BRACKET AV3 VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE, .150" PITCH AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150" PITCH V21 .555 (14,10) V6 .460 (11,68) DIM ‘A’ OPTION CODE V21 .555 (14,10) V6 .460 (11,68) DIM ‘A’ OPTION CODE 8261SH9AV2BE2 DPDT 8161SH9__BE2 SPDT 8261SH9__BE2 DPDT APushbutton
A–57 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ittcannon.com Third Angle Projection C&K 8060 Series Alternate Action and Momentary Pushbutton Switches CONTACT MATERIAL SNAP-IN PC MOUNTING PC MOUNTING V31 VERTICAL MOUNT, V-BRACKET, SNAP-IN V3, V4 VERTICAL MOUNT, V-BRACKET V31 VERTICAL MOUNT, V-BRACKET, SNAP-IN V3, V4 VERTICAL MOUNT, V-BRACKET Not available with I seal. Not available with I seal. 8161SH9__BE2 SPDT 8261SH9__BE2 DPDT V3, V31 .460 (11,68) V4 .630 (16,00) DIM ‘A’ OPTION CODE V3, V31 .460 (11,68) V4 .630 (16,00) DIM ‘A’ OPTION CODE 1 CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate. 2 END CONTACTS: Coin silver, with gold plate over nickel plate.
3 CENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate
over nickel plate. 4 END CONTACTS: Coin silver, silver plated. 5 CENTER CONTACT & ALL TERMINALS: Copper alloy, silver plated. 6 TERMINALS: Copper alloy, with tin-lead alloy over nickel plate. 7 TERMINALS: Copper alloy, with matte-tin over nickel plate. NOTE: Any models supplied with P, S, R,Q, B or G contact material ar e RoHS compliant. For the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs. All models with all options when ordered with S, R, G, L, M or Q contact material. B contact material standard with all terminations except C, Z & Z3. Q contact material standard with C, Z & Z3 terminations. P, S, R, K, L & M contact materials not available with Z & Z3 terminations. APushbutton OPTION CODE CONTACT MATERIAL TERMINAL PLATING RATINGS SILVER 5 TIN-LEAD 6 MATTE-TIN 7 GOLD 1 SILVER 4,5 GOLD OVER SILVER 2,3 GOLD 3 TIN-LEAD 6 MATTE-TIN 7 GOLD 1 TIN-LEAD 6 MATTE-TIN 7 LOW LEVEL/DRY CIRCUIT POWER LOW LEVEL/DRY CIRCUIT OR POWER 0.4 VA MAX. @ 20 V AC OR DC MAX.
6 AMPS @ 120 V AC OR 28 V DC;
3 AMPS @ 250 V AC. 0.4 VA MAX @ 20 V AC OR DC MAX. OR 3 AMPS @ 250 V AC. B K P Q M S G L R TERMINATIONS RoHS COMPLIANT * RoHS COMPATIBLE * * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. YES YES YES YES YES YES YES YES YES YES NO YES YES NO YES YES NO YES
A–58 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ittcannon.com Third Angle Projection C&K 8060 Series Alternate Action and Momentary Pushbutton Switches SEAL AVAILABLE HARDWARE .200 DIA. (5,08 ).120 (3,05) .155 (3,94) I EPOXY POTTED BASEE EPOXY SEAL NOTE: Available with C, W, Z, Z3 terminations only. Cap PART NO.
708901000 WHITE
708902000 BLACK
708903000 RED
708904000 ORANGE
708905000 YELLOW
708909000 GRAY
Material: Nylon Finish: Gloss Cap PART NO.
752701000 WHITE
752702000 BLACK
752703000 RED
752704000 ORANGE
752705000 YELLOW
752709000 GRAY
Material: Nylon Finish: Gloss Cap PART NO.
801801000 WHITE
801802000 BLACK
801803000 RED
801804000 ORANGE
801805000 YELLOW
801809000 GRAY
Material: Nylon Finish: Gloss Cap, Snap-fitting plunger PART NO.
894001000 WHITE
894002000 BLACK
894003000 RED
894004000 ORANGE
894005000 YELLOW
894009000 GRAY
Material: Nylon Finish: Gloss Cap, Snap-fitting plunger PART NO.
894101000 WHITE
894102000 BLACK
894103000 RED
894104000 ORANGE
894105000 YELLOW
894109000 GRAY
Material: Nylon Finish: Gloss Cap, J80, J81 & J82 options only PART NO.
484601000 WHITE
484602000 BLACK
484603000 RED
484604000 ORANGE
484605000 YELLOW
484609000 GRAY
Material: Nylon Finish: Gloss Frame PART NO.
613302263 BLACK
Material: Nylon Finish: Matte Frame PART NO.
615602263 BLACK
Material: Nylon Finish: Matte Cap, J86 & J96 options only PART NO. 459701000 459702000 459703000 459704000 459705000 459709000 Material: Nylon Finish: Gloss PART NO.
476801000 WHITE
476802000 BLACK
476803000 RED
476804000 ORANGE
476805000 YELLOW
476809000 GRAY
Material: Nylon Finish: Matte PART NO.
798201000 WHITE
798202263 BLACK
798203000 RED
798204000 ORANGE
798205000 YELLOW
798209000 GRAY
Material: Nylon Finish: Matte NOTE: Additional nuts, locking rings and lockwashers available separately, see section “Technical Data and Additional Hardware”. Other cap & frame colors available, consult Customer Service Center. APushbutton
A–59 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ittcannon.com Third Angle Projection .030 (0,76) .200 DIA. (5,08˘) .025 SQ. TYP. (0,63) .750 (19,05).340 (8,64) .230 DIA. (5,84˘) Flat denotes cathode. Suggested LED for J82 & J84 options. Dimensions for reference only. TYPICAL APPLICATION Fits Z3 Termination female connector PART NO. 530100000 Available in loose pieces. Above frames (part nos. 432XXXXXX) are also available with insert which accepts LED for indicator light assembly. Order insert separately from frame. Blank insert panel (without hole for LED) also available. LED not included. Special colors, custom markings available, consult Customer Service Center. PANEL INSERT WITH HOLE FOR LED PART NO. 894902000 BLANK PANEL INSERT WITHOUT HOLE FOR LED PART NO.
476602000 BLACK
.047" (1,19) PANEL THK. PART NO. 432502263 .062" (1,57) PANEL THK. PART NO. 432602263 .090" (2,29) PANEL THK. PART NO. 432702263 .125" (3,18) PANEL THK. PART NO.
432802263 BLACK
Frames snap into panel opening and are independent from switch mounting. Accurate positioning of the PC mounted switch relative to the panel opening is necessary to provide proper clearance between actuator and LED INFORMATION SWITCHES WITH LED SUPPLIED: J86 OPTION: Rectangular LEDs are supplied on 8060 Series pushbutton switches with J86 option. These LEDs are factory installed and are not replaceable. The following specifications apply: Process Information: Soldering to LED leads must be completed within 5 seconds at 500ºF (260ºC) maximum. Caution: Circuit elements must limit forward current of LED to 50mA max. continuous. * Extra-bright red LED available (typ. intensity 4.5 mcd), consult Customer Service Center. LEDs are not supplied with J82 & J84 options. LED snaps into switch frame surrounding actuator and is wired externally. 125 mW 75 mW 125 mW 50 mA 30 mA 50 mA 2.5 V 20 mA 10 mA 20 mA 2.1 V 1.0 mcd 0.5 mcd 4.0 mcd Green Red* Yellow MAX RATINGS AT 25ºC AMBIENT TEMPERATURE FORWARD CONTINUOUS POWER VOLTAGE FORWARD CURRENT DISSIPATION TYP. FORWARD CURRENT TYP. FORWARD VOLTAGE TYP. INTENSITYCOLOR OPTION CODE Panel Inserts AVAILABLE HARDWARE C&K 8060 Series Alternate Action and Momentary Pushbutton Switches APushbutton