793 WILCOXON | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
Note: Due to continuous process improvement, specifications are subject to change without notice. This document is cleared for public release. Wilcoxon Sensing Technologies 8435 Progress Drive Frederick, MD 21701 USAAn Amphenol Company buy.wilcoxon.com www.wilcoxon.com Tel: +1 (301) 330-8811 Fax: +1 (301) 330-8873 info@wilcoxon.com SPECIFICATIONS 793 series General purpose accelerometer Accessories supplied: SF6 mounting stud (metric mounting available); calibration data (level 3) Key features
- Hazardous area certified versions available (model 793E, 793-33, 793-35)
- Radiation resistant version available (model 793R)
- Manufactured in ISO 9001 facility Sensitivity, ± 5%, 25°C 100 mV/g Acceleration range, VDC > 25 V 80 g peak Amplitude nonlinearity 1% Frequency response: ± 5% ± 10% ± 3 dB 1.5 - 5,000 Hz 1.0 - 7,000 Hz 0.5 - 15,000 Hz Resonance frequency 25 kHz Transverse sensitivity, max 5% of axial Temperature response: –50°C +120°C –15% +20% Power requirement: Voltage source Current regulating diode 18 - 30 VDC 2 - 10 mA Electrical noise, equiv. g: Broadband 2.5 Hz to 25 kHz Spectral 10 Hz 100 Hz 1,000 Hz 600 µg 8 µg/√Hz 5 µg/√Hz 5 µg/√Hz Output impedance, max 100 Ω Bias output voltage 12 VDC Grounding case isolated, internally shielded Temperature range –50° to +120°C Vibration limit 500 g peak Shock limit 5,000 g Sealing hermetic Base strain sensitivity, max 0.0005 g/μstrain Sensing element design PZT, compression Weight 112 grams Case material 316L stainless steel Mounting 1/4-28 tapped hole Output connector 2 pin, MIL-C-5015 style Mating connector R6 type Recommended cabling J10 / J9T2A Connections Function Connector pin power/signal A common B ground shell 98169 Rev.I.1 09/18
2 PIN
15/16" hex 1/4-28 mounting hole1.0" 1.78" 2.42" Certifications Class I, II, III, T4 Div 1 Groups A, B, C, D, E, F, G Div 2 Groups A, B, C, D, F, G 793EAll 793 models