793-10 WILCOXON | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
Note: Due to continuous process improvement, specifications are subject to change without notice. This document is cleared for public release. Wilcoxon Sensing Technologies 8435 Progress Drive Frederick, MD 21701 USAAn Amphenol Company buy.wilcoxon.com www.wilcoxon.com Tel: +1 (301) 330-8811 Fax: +1 (301) 330-8873 info@wilcoxon.com SPECIFICATIONS 793-10 Industrial accelerometer Accessories supplied: SF6 mounting stud; calibration data; CCD card Key features
- High amplitude range
- Optional intrinsic safety certification (model 793-10-35)
- Manufactured in ISO 9001 facility Sensitivity, ± 5%, 25°C 10 mV/g Acceleration range 500 g peak Amplitude nonlinearity 1% Frequency response: ± 5% ± 10% ± 3 dB 3 - 5,000 Hz 2 - 7,000 Hz 1 - 15,000 Hz Resonance frequency, mounted, nominal 25 kHz Transverse sensitivity, max 5% of axial Temperature response: –50°C +120°C –10% +5% Power requirement: Voltage source Current regulating diode 18 - 30 VDC 2 - 10 mA Electrical noise, equiv. g, nominal: Broadband 2.5 Hz to 25 kHz Spectral 10 Hz 100 Hz 1,000 Hz 4,500 µg 50 µg/√Hz 40 µg/√Hz 20 µg/√Hz Output impedance, max 100 Ω Bias output voltage, nominal 12 VDC Grounding case isolated, internally shielded Temperature range –50° to +120°C Vibration limit 500 g peak Shock limit 5,000 g peak Electromagnetic sensitivity, equiv. g 15 µg/gauss Humidity limit 100% relative Base strain sensitivity 0.001 g/μstrain Weight 110 grams Case material stainless steel Mounting 1/4-28 tapped hole Output connector 2 pin, MIL-C-5015 style Mating connector R6 Recommended cabling J10 / J9T2A Connections Function Connector pin power/signal A common B 98170 Rev.C.2 09/18
2 PIN
15/16" hex 1/4-28 mounting hole1.0" 1.78" 2.42"