787F WILCOXON | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
Note: Due to continuous process improvement, specifications are subject to change without notice. This document is cleared for public release. Wilcoxon Sensing Technologies An Amphenol Company 98958 Rev.C3 06/23
8435 Progress Drive
Frederick, MD 21701 USA info@wilcoxon.com www.wilcoxon.com Tel: +1 (301) 330-8811 Fax: +1 (301) 330-8873 SPECIFICATIONS 787F General purpose, integral cable accelerometer Accessories supplied: #80165-01 captive hex head screw; calibration data (level 2) Key features
- Usable in submerged applications up to 30 ft.
- Manufactured in ISO 9001 facility Sensitivity, ± 5%, 25°C 100 mV/g Acceleration range 80 g peak Amplitude nonlinearity 1% Frequency response: ± 10% ± 3 dB 1 - 5,000 Hz 0.5 - 10,000 Hz Resonance frequency 22 kHz Transverse sensitivity, max 5% of axial Temperature response: –50°C +120°C –5% +5% Power requirement: Voltage source Current regulating diode 18 - 30 VDC 2 - 10 mA Electrical noise, equiv. g, nominal: Broadband 2.5 Hz to 25 kHz Spectral 10 Hz 100 Hz 1,000 Hz 700 µg 10 µg/√Hz 5 µg/√Hz 5 µg/√Hz Output impedance, max 100 Ω Bias output voltage 12 VDC Grounding case grounded, internally shielded Temperature range –50° to +120°C Vibration limit 500 g Shock limit, min 5,000 g Electromagnetic sensitivity, equiv. g, max 70 µg/gauss Sealing hermetic Base strain sensitivity, max 0.002 g/μstrain Hydrostatic pressure 100 psi Sensing element design PZT ceramic / shear Weight 145 grams Case material 316L stainless steel Mounting 1/4-28 captive hex head screw w/ 0.046” diameter safety wire hole Integral cabling J9T2A, 16 ft., blunt cut Connections Function Cable conductor color power/signal white common black case shield 7/16 Hex head 1/4-28 Mounting thread Strain relief boot Minimum bend diamiter 7/16 Hex head 1/4-28 Mounting thread Strain relief boot Minimum bend diamiter 1.78