770092 SCS | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
Properties Typical Value Test Method Thickness* 0.063ʺ (1.6 mm) ±0.005" Color* Green/Black Light Blue/Black Gray/Black Dark Blue/Black Resistances Surface to Ground (Rtg) Surface to Surface (Rtt) 1 x 106 to < 1 x 109 ohms 1 x 106 to < 1 x 109 ohms ANSI/ESD S4.1, ESD TR53 ANSI/ESD S4.1, ESD TR53 Hardness 65 ± 5 Shore “A” ASTM-D2240 Tolerance Mat Kit Rolls Width +/- 0.250" Length +/- 1" Width +/- 0.250" Length +/- 2" *Color, texture and thickness may vary between lots and mills. Matting materials have a tendency to shrink slightly when first unrolled. In applications where length is critical, allow the material to condition for at least 4 hours before cutting to size. Always using care, trim with a sharp knife or razor blade. R3 Dissipative Rubber Worksurface Mat Meets ANSI/ESD S20.20 worksurface required limit (and recommendation of ANSI/ESD S4.1) tested per ANSI/ESD S4.1 and ESD TR53. Resistance to solvents, hot solder and soldering irons makes the R3 Dissipative Rubber Worksurface Mat a versatile static-safe worksurface. Electrical performance is accomplished by using a two-layer rubber combination of a static dissipative colored top with a conductive black bottom. Compatible with Continuous Workstation Monitors. Available in rolls and mat kits. DRAWING NUMBER R3 Series DATE January 2018 © 2018 DESCO INDUSTRIES INC. Employee Owned R3 DISSIPATIVE RUBBER WORKSURFACE MAT
926 JR Industrial Drive, Sanford, NC 27332
WEB SITE: StaticControl.com PHONE (919) 718-0000 Roll Item Numbers Size Light Blue Gray Green Dark Blue 2' x 50' (0.6 m x 15.2 m) 770070 770086 770081 770091 2.5' x 50' (0.8 m x 15.2 m) 770071 770087 770082 770092 3' x 50' (0.9 m x 15.2 m) 770072 770088 770083 770093 4' x 50' (1.2 m x 15.2 m) 770073 770089 770084 Includes roll of matting material. Made in the United States of America Table Mat Kit Item Numbers Table Mat Kit Includes:
1 Table Mat, size as specified
1 LPCGC151M 15' (4.6 m) Ground Cord 2 3049 Snap Kit Size Light Blue Gray Green 24" x 48" (0.6 m x 1.2 m) 770074 770090 770085 Specifications and procedures subject to change without notice. Grounding: This material must be properly grounded for optimum electrical performance. See Grounding Cords. Cleaning: For optimum electrical performance, surface must be cleaned regularly using a recommended ESD mat cleaner. Do not use cleaners with silicone. Silicone buildup will create an insulative film on the surface. Mat Kits are laser engraved for branding and auditing purposes. Light Blue Gray Dark Blue