75ACDR GAPTEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 1 of 5 75ACDR_SC – Rev. 2020-1.3 Specifications subject to change without notice. 75ACDR_SC Series 75W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated Industrial DIN Rail Power Supply High efficiency up to 91% Universal AC input range (85~264VAC) Easy fuse tripping due to high overload current Built-in current sharing function Built-in current limiting circuit Over voltage protection (OVP) Over load protection (OLP) Short circuit protection (SCP) Over temperature prot. (OTP) Wide operating ambient temperature (-25°C~70°C) 150% peak load capacity 100% full load burn-in test AC-DC Converter 75 Watt The 75ACDR_SC series features standard rail mounting, energy efficiency and is highly cost-effective. The series offers stability and high noise immunity especially for industrial control equipment, machinery and other demanding environments for industri al equipment. This converter offers a compact and light weight design with and standard rail installation (32mm). Furthermore this series offers Easy Fuse Tripping due and a built-in DC OK relay contact. The converter can be installed on TS-35/7.5 or TS-35/15. Example: 75ACDR_24SC 75 = 75 Watts AC = AC/DC DR = Din Rail 24 = Vout S = Single Output C = PFC (Power Factor Correction) Input specifications Input voltage range 85~264VAC, 127-360VDC Input frequency 47~63Hz Power factor 100VAC

  • 0.99 (typ) 230VAC
  • 0.95 (typ) AC current 100VAC
  • 0.95A (max) 230VAC
  • 0.45A (max) Inrush current Cold start 100VAC
  • 30A (typ) 230VAC
  • 60A (typ) Leakage current Input—output: <0.25mA Input—PG: <3.5mA Output specifications Item Test conditions Min Typ Max Units Output voltage accuracy Full load ±1 % Voltage adjustment range
  • 12V: 12V~14V
  • 24V: 24~28V
  • 48V: 48~56V Line regulation Vin= min. to max. at full load ±0.5 % Load regulation 0% to 100% load ±1 % Ripple + Noise see model specifications table Set-up time • @230VAC
  • @100VAC 250 100 ms ms Hold-up time @230VAC, full load 20 ms Overshoot and undershoot 5 % Switching frequency 100 KHz Protection specifications Over-load protection 110%~150% of rated current, Constant current limiting for some time (150% of rated current, last 3S) then PS stop working for 7S, after 7S, if the load <=rated current, PS will work normally, auto recovery Over-voltage protection
  • 12V: 15~18V, hiccup mode, auto recovery
  • 24V: 29~33V, hiccup mode, auto recovery
  • 28V: 58~65V, hiccup mode, auto recovery Over-temperature protection 100±5°C, detect on heat sink of power transistor; shut down O/P, auto recovery after temperature goes down. Common specifications Short circut protection: Long-term mode, automatic recovery Temperature rise at full load: 40°C MAX Cooling: Free air convection Operation temperature range: -25°C~+70°C Storage temperature range: -40°C ~+85°C Storage humidity range: < 95% Temperature coefficient: 0.03%/°C MAX MTBF (using MIL-HDBK-217F): +25°C >300,000 hours Safety standards: meet UL508, UL60950, EN60950 Power boost: 150% of rated current Parallel function: support DC-OK: V On: when output voltage is up to 90% of rated output voltage V Off: when output voltage is down to 80% of rated output voltage DC-OK relay contact rating: Max 30V/1A or 60V/0.3A or 30Vac/0.3A resistive load Case material: Heat-resistant Plastic (UL94-V0) and metal Dimensions: 124*119*32mm Weight: 757g Isolation specifications Item Test condition Min Typ Max Units Withstand voltage* • Primary-Sec. ≤10mA
  • Primary-PG ≤10mA
  • Secondary-PG ≤10mA 3000 2500 500 VAC Isolation resistance 100 MΩ * Input-Output, tested for 1 minute, 500VDC and leakage current less than 1mA Note: 1. All parameters NOT specially mentioned are measured at rated input, rated load and 25°C of ambient temperature. UL-60950-1 (E347551)

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 2 of 5 75ACDR_SC – Rev. 2020-1.3 Specifications subject to change without notice. 75W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated Industrial DIN Rail Power Supply 75ACDR_SC Series Mechanical dimensions AC terminal blocks installation information Terminal No. Function Wire specs Rec. torque 1 L 20~10AWG 1Nm2 N 3 PG DC terminal blocks installation information Terminal No. Function Wire specs Rec. torque 4&5 DC OK Relay contact 20~10AWG 1Nm6 -V 7 +V AC/DC terminal Type Screw terminal blocks Solid wire 0.5-6mm2 Strand wire 0.5-4mm2 Wire Spec AWG20-10 (PG wire >18AWG) Max wire diameter 2.8mm Recommended stripping length 7mm Screwdriver 3.5mm Straight or Cross Screwdriver Recommended torque 1NM EMC specifications EMC / Emission Compliance to EN55022, EN55024, FCC PART 15 Class B EMC / Harmonic current Compliance to EN61000-3-2, CLASS A EMC / Immunity Compliance to EN61000-4-2, -3, -4, -5, -6, -8, -11; heavy industry level perf. Criteria B The power supply is considered as a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. Approval Model Power [W] Output [Vo, VDC] Rated Current [A] Current Range [A] Ripple&Noise* [mV, max] 0~70°C -25°C Efficiency [%, typ] UL (pending) 75ACDR_12SC 75 12 6.3 0~6.3 100 200 88 UL (pending) 75ACDR_24SC 75 24 3.2 0~3.2 120 240 91 UL (pending) 75ACDR_48SC 75 48 1.6 0~1.6 120 240 91 * Measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1 uF & 10uF parallel capacitor. 75ACDR_SC

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 3 of 5 75ACDR_SC – Rev. 2020-1.3 Specifications subject to change without notice. 75W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated Industrial DIN Rail Power Supply 75ACDR_SC Series Typical characteristics Functional block diagram short time working, 3s. continuous working Functional diagram Ambient temperature (°C) Ambient temperature (°C) Ambient temperature (°C) Load (A) Load (A) Load (A) Output current vs. ambient temperature – 75ACDR_12SC Output current vs. ambient temperature – 75ACDR_24SC Output current vs. ambient temperature – 75ACDR_48SC

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 4 of 5 75ACDR_SC – Rev. 2020-1.3 Specifications subject to change without notice. 75W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated Industrial DIN Rail Power Supply 75ACDR_SC Series Mounting method instruction A1 is recommended output current. A2 is the allowed max output current (PSU lifetime is around half of A1). 75ACDR_12SC Mounting A Mounting B Mounting C Mounting D Mounting E

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 5 of 5 75ACDR_SC – Rev. 2020-1.3 Specifications subject to change without notice. 75W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated Industrial DIN Rail Power Supply 75ACDR_SC Series Mounting method instruction 75ACDR_24SC Mounting A Mounting B Mounting C Mounting D Mounting E