74LV02 NEXPERIA | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 12
Technical content
The 74LV02 provides a quad 2-input NOR function. Table 1. Ordering information
5.1 Pinning
5.2 Pin description
Table 2. Pin description
[1] The input and output voltage ratings may be exceeded if the input and output current ratings are observed. [2] Ptot derates linearly with 8 mW/K above 70°C. [3] Ptot derates linearly with 5.5 mW/K above 60°C. [4] Ptot derates linearly with 4.5 mW/K above 60°C. Table 2. Pin description …continued Table 3. Function table Table 4. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).
- Recommended operating conditions
VCC = 1.0 V (with input levels GND or VCC ). Table 5. Recommended operating conditions Voltages are referenced to GND (ground = 0 V). Table 6. Static characteristics Voltages are referenced to GND (ground = 0 V).
[1] Typical values are measured at Tamb = 25°C. [1] All typical values are measured at Tamb =2 5°C. [2] tpd is the same as tPLH and tPHL . [3] Typical values are measured at nominal supply voltage (VCC = 3.3 V and VCC = 5.0 V). [4] C PD is used to determine the dynamic power dissipation (PD inµW). Σ(CL × VCC 2 × fo) = sum of the outputs. Table 6. Static characteristics …continued Voltages are referenced to GND (ground = 0 V). Table 7. Dynamic characteristics GND = 0 V; For test circuit seeFigure7.
Measurement points are given inTable8. VOL and VOH are typical voltage output levels that occur with the output load. Table 8. Measurement points Test data is given inTable9. R T = Termination resistance should be equal to output impedance Zo of the pulse generator. C L = Load capacitance including jig and probe capacitance. Table 9. Test data
74LV02_4 Product data sheet Rev. 04 — 20 December 2007 7 of 12 Nexperia 74LV02 Quad 2-input NOR gate 12. Package outline Fig 8. Package outline SOT108-1 (SO14) UNIT A max. A 1 A 2 A 3 bp cD (1) E (1) (1)eH E LL p QZ y w v q REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA mm inches 1.75 0.25 0.10 1.45 1.25 0.25 0.49 0.36 0.25 0.19 8.75 8.55 4.0 3.8 1.27 6.2 5.8 0.7 0.6 0.7 0.3 8 o o 0.25 0.1 DIMENSIONS (inch dimensions are derived from the original mm dimensions) Note 1. Plastic or metal protrusions of 0.15 mm (0.006 inch) maximum per side are not included. 1.0 0.4 SOT108-1 X w M q AA 1 A 2 bp D H E Lp Q detail X E Z e c L v M A (A )3 A y 076E06 MS-012 pin 1 index 0.069 0.010 0.004 0.057 0.049 0.01 0.019 0.014 0.0100 0.0075 0.35 0.34 0.16 0.15 0.05 1.05 0.0410.244 0.228 0.028 0.024 0.028 0.0120.01 0.25 0.01 0.0040.039 0.016 99-12-27 03-02-19 0 2.5 5 mm scale SO14: plastic small outline package; 14 leads; body width 3.9 mm SOT108-1 © Nexperia B.V. 2017. All rights reserved
74LV02_4 Product data sheet Rev. 04 — 20 December 2007 8 of 12 Nexperia 74LV02 Quad 2-input NOR gate Fig 9. Package outline SOT402-1 (TSSOP14) UNIT A 1 A 2 A 3 bp cD (1) E (2) (1)eH E LL p QZ y w v q REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA mm 0.15 0.05 0.95 0.80 0.30 0.19 0.2 0.1 5.1 4.9 4.5 4.3 0.65 6.6 6.2 0.4 0.3 0.72 0.38 o o0.13 0.10.21 DIMENSIONS (mm are the original dimensions) Notes 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. 2. Plastic interlead protrusions of 0.25 mm maximum per side are not included. 0.75 0.50 SOT402-1 MO-153 99-12-27 03-02-18 w M bp D Z e 0.25 14 8 q AA 1 A 2 Lp Q detail X L (A )3 H E E c v M A XA y 0 2.5 5 mm scale TSSOP14: plastic thin shrink small outline package; 14 leads; body width 4.4 mm SOT402-1 A max. 1.1 pin 1 index © Nexperia B.V. 2017. All rights reserved
74LV02_4 Product data sheet Rev. 04 — 20 December 2007 9 of 12 Nexperia 74LV02 Quad 2-input NOR gate Fig 10. Package outline SOT762-1 (DHVQFN14) terminal 1 index area 0.51 A 1 EhbUNIT ye 0.2 c REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA mm 3.1 2.9 D h 1.65 1.35 2.6 2.4 1.15 0.85 20.30 0.18 0.05 0.00 0.05 0.1 DIMENSIONS (mm are the original dimensions) 0.5 0.3 L 0.1 v 0.05 w 0 2.5 5 mm scale SOT762-1 DHVQFN14: plastic dual in-line compatible thermal enhanced very thin quad flat package; no leads; 14 terminals; body 2.5 x 3 x 0.85 mm A (1) max. A c detail X yy1 Ce L Eh D h e b 13 9 X D E C B A 02-10-17 03-01-27 terminal 1 index area A C C Bv M w M E (1) Note 1. Plastic or metal protrusions of 0.075 mm maximum per side are not included. D (1) © Nexperia B.V. 2017. All rights reserved
Table 10. Abbreviations Table 11. Revision history
- Legal texts have been adapted to the new company name where appropriate.
- Section3: DHVQFN14 package added.
- Section7: derating values added for DHVQFN14 package.
- Section12: outline drawing added for DHVQFN14 package. 74LV02_3 20030303 Product specification - 74LV02_2 74LV02_2 19980420 Product specification - 74LV02_1 74LV02_1 19970203 Product specification - - © Nexperia B.V. 2017. All rights reserved
74LV02_4 Product data sheet Rev. 04 — 20 December 2007 11 of 12 Nexperia 74LV02 Quad 2-input NOR gate 15. Legal information
15.1 Data sheet status
[1] Please consult the most recently issued document before initiating or completing a design. [2] The term ‘short data sheet’ is explained in section “Definitions”. [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www .nexperia.com .
15.2 Definitions
Draft —The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. Nexperia does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet —A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local Nexperia sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail.
15.3 Disclaimers
General — Information in this document is believed to be accurate and reliable.However,Nexperiadoesnotgiveanyrepresentationsor warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Right to make changes —Nexperia reservestherighttomake changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use — Nexperia products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of a Nexperia product can reasonably be expected to result in personal injury, death or severe property or environmental damage. Nexperia accepts no liability for inclusion and/or use of Nexperia products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Applications —Applications that are described herein for any of these products are for illustrative purposes only. Nexperia makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Limiting values —Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) may cause permanent damage to the device. Limiting values are stress ratings only and operation of the device at these or any other conditions above those given in the Characteristics sections of this document is not implied. Exposure to limiting values for extended periods may affect device reliability. Terms and conditions of sale — Nexperia products are sold subject to the general terms and conditions of commercial sale, as published athttp://www.nexperia.com /profi le/ter ms , including those pertaining to warranty, intellectual property rights infringement and limitation of liability, unless explicitly otherwise agreed to in writing by Nexperia. In case of any inconsistency or conflict between information in this document and such terms and conditions, the latter will prevail. No offer to sell or license —Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights.
15.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 16. Contact information For additional information, please visit:http://www .nexperia.com For sales office addresses, send an email to:salesaddresses@nexperia.com Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification. © Nexperia B.V. 2017. All rights reserved
- Contents © Nexperia B.V. 2017. All rights reserved For more information, please visit: http://www.nexperia.com For sales office addresses, please send an email to: salesaddresses@nexperia.com Date of release: