74F367 NEXPERIA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 10

Technical content

Dear Customer, On 7 February 2017 the former NXP Standard Product business became a new company with the tradename Nexperia. Nexperia is an industry leading supplier of Discrete, Logic and PowerMOS semiconductors with its focus on the automotive, industrial, computing, consumer and wearable application markets In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below. use http://www.nexperia.com salesaddresses@nexperia.com (email) Replace the copyright notice at the bottom of each page or elsewhere in the document, depending on the version, as shown below: reserved Should be replaced with: - © Nexperia B.V. (year). All rights reserved. If you have any questions related to the data sheet, please contact our nearest sales office via e -mail or telephone (details via salesaddresses@nexperia.com). Thank you for your cooperation and understanding, Kind regards, Team Nexperia

/C0080 /C0115 /C0111/C0110/C0111 /C0115 74F367 Hex buffer/driver Product data Replaces Product specification 74F365/74F367 of 2000 Jun 30

2004 Jan 30

Philips Semiconductors Product data 74F367Hex buffer/driver

22004 Jan 30

FEATURES

  • High-impedance NPN base inputs for reduced loading (20 µA in HIGH and LOW states)
  • High-speed
  • Bus oriented
  • 3-State buffer outputs sink 64 mA TYPE TYPICAL PROPAGATION DELAY TYPICAL SUPPLY CURRENT (TOTAL) 74F367 5.0 ns 36 mA

ORDERING INFORMATION

COMMERCIAL RANGE: V CC = 5 V ± 10%; Tamb = 0 °C to +70 °C Type number Package Name Description Version N74F367N DIP16 plastic dual in-line package; 16 leads (300 mil) SOT38-4 N74F367D SO16 plastic small outline package; 16 leads; body width 3.9 mm SOT109-1 INPUT AND OUTPUT LOADING AND FAN-OUT TABLE PINS DESCRIPTION 74F(U.L.) HIGH / LOW LOAD VALUE HIGH / LOW I0 - I5 Inputs 1.0 / 0.033 20 µA / 20 µA OE 0, OE1 Output enable inputs (active-LOW) 1.0 / 0.033 20 µA / 20 µA Y0 - Y5 Data Outputs 750 / 106.7 15 mA / 64 mA PIN CONFIGURATION OE 1I0 GND VCCOE 0 74F367 SF00905

Philips Semiconductors Product data 74F367Hex buffer/driver

2004 Jan 30 3

VCC = Pin 16 GND = Pin 8 SF00906

1 OE0

LOGIC SYMBOL (IEEE/IEC) SF00907 EN1 74F367 EN2 LOGIC DIAGRAM OE 0 OE 1 74F367 VCC = Pin 16 GND = Pin 8 SF01442 FUNCTION TABLE INPUTS OUTPUTS OE n In Yn L L L L H H H X Z H = HIGH voltage level L = LOW voltage level X = Don’t care Z = High impedance “off” state

Philips Semiconductors Product data 74F367Hex buffer/driver

2004 Jan 30 4

Operation beyond the limits set forth in this table may impair the useful life of the device. Unless otherwise noted these limits are over the operating free-air temperature range. SYMBOL PARAMETER RATING UNIT VCC Supply voltage range –0.5 to +7.0 V VIN Input voltage range –0.5 to +7.0 V IIN Input current range –30 to +5 mA VOUT Voltage applied to output in HIGH output state range –0.5 to 5.5 V IOUT Current applied to output in LOW output state 128 mA Tamb Operating free-air temperature range 0 to +70 °C Tstg Storage temperature range –65 to +150 °C RECOMMENDED OPERATING CONDITIONS SYMBOL PARAMETER LIMITS UNIT SYMBOL PARAMETER MIN TYP MAX VCC Supply voltage 4.5 5.0 5.5 V VIH HIGH-level input voltage 2.0 – – V VIL LOW-level input voltage – – 0.8 V IIK Input clamp current – – –18 mA IOH HIGH-level output current – – –15 mA IOL LOW-level output current – – 64 mA Tamb Operating free-air temperature range 0 – 70 °C

Philips Semiconductors Product data 74F367Hex buffer/driver

2004 Jan 30 5

DC ELECTRICAL CHARACTERISTICS Over recommended operating free-air temperature range unless otherwise noted. SYMBOL PARAMETER TEST CONDITIONS 1 LIMITS UNIT SYMBOL PARAMETER TEST CONDITIONS 1 MIN TYP 2 MAX VCC = MIN; VIL = MAX; ± 10% VCC 2.4 – – V VO HIGH level output voltage CC IL VIH = MIN; IOH = –3 mA ± 5% VCC 2.7 3.3 – V VOH HIGH -level output voltage VCC = MIN; VIL = MAX; ± 10% VCC 2.0 – – VCC IL VIH = MIN; IOH = –15 mA ± 5% VCC 2.0 – – V VO Low level output voltage VCC = MIN; VIL = MAX; ± 10% VCC – – 0.55 V VOL Low-level output voltage CC IL VIH = MIN; IOL = MAX ± 5% VCC – 0.42 0.55 V VIK Input clamp voltage VCC = MIN; II = IIK – –0.73 –1.2 V II Input current at maximum input voltage VCC = 0 V; VI = 7.0 V – – 100 µA IIH HIGH-level input current VCC = MAX; VI = 2.7 V – – 20 µA IIL LOW-level input current VCC = MAX; VI = 0.5 V – – –20 µA IOZH Off-state output current, HIGH-level voltage applied VCC = MAX; VO = 2.7 V – – 50 µA IOZL Off-state output current, LOW-level voltage applied VCC = MAX; VO = 0.5 V – – –50 µA IOS Short-circuit output current3 VCC = MAX –100 – –225 mA ICCH – 25 35 mA ICC Supply current (total) ICCL VCC = MAX – 47 62 mA ICCZ – 35 48 mA NOTES: 1. For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions for the applicable type. 2. All typical values are at VCC = 5 V, Tamb = 25 °C. 3. Not more than one output should be shorted at a time. For testing IOS , the use of high-speed test apparatus and/or sample-and-hold techniques are preferable in order to minimize internal heating and more accurately reflect operational values. Otherwise, prolonged shorting of a HIGH output may raise the chip temperature well above normal and thereby cause invalid readings in other parameter tests. In any sequence of parameter tests, IOS tests should be performed last. AC ELECTRICAL CHARACTERISTICS LIMITS Tamb = +25 °C Tamb = –55 °C to +125 °C SYMBOL PARAMETER TEST CONDITIONS VCC = +5.0 V VCC = +5.0 V ± 10% UNIT C L = 50 pF; RL = 500 Ω C L = 50 pF; RL = 500 Ω MIN TYP MAX MIN MAX tPLH tPHL Propagation delay In to Yn Waveform 1 2.5 2.5 4.5 5.5 6.5 7.0 2.0 2.0 7.0 7.5 ns ns tPZH tPZL Output Enable time to HIGH or LOW level Waveform 2 Waveform 3 3.0 3.0 5.5 6.5 7.5 8.5 3.0 3.0 8.5 9.0 ns ns tPHZ tPLZ Output Disable time from HIGH to LOW level Waveform 2 Waveform 3 2.0 2.0 4.5 4.0 6.5 6.5 2.0 2.0 7.0 7.0 ns ns

Philips Semiconductors Product data 74F367Hex buffer/driver

2004 Jan 30 6

For all waveforms, VM = 1.5 V VM VM VM VM tPHLtPLH In Yn SF00914 Waveform 1. For non-inverting outputs VM VM VM tPHZtPZH OE Yn VOH – 0.3 V 0 V SF00913 Waveform 2. 3-State Output Enable time to HIGH level and Output Disable time from HIGH level VM VM VM tPLZtPZL VOL + 0.3 V OE 3.5 V Yn SF00915 Waveform 3. 3-State Output Enable time to LOW level and Output Disable time from LOW level TEST CIRCUIT AND WAVEFORM tw 90% VM 10% 90% VM 10% 90% VM 10% 90% VM 10% NEGATIVE PULSE POSITIVE PULSE tw AMP (V) 0 V 0 V tTHL (tf ) INPUT PULSE REQUIREMENTS rep. rate tw tTLH tTHL 1 MHz 500 ns 2.5 ns 2.5 ns Input Pulse Definition VCC family 74F D.U.T.PULSE GENERATOR R LC LR T VIN VOUT Test Circuit for 3-State Outputs DEFINITIONS: R L = Load resistor; see AC electrical characteristics for value. C L = Load capacitance includes jig and probe capacitance; see AC electrical characteristics for value. R T = Termination resistance should be equal to ZOUT of pulse generators. tTHL (tf ) tTLH (tr ) tTLH (tr ) AMP (V) amplitude 3.0 V 1.5 V VM R L 7.0 V SF00777 TEST SWITCH tPLZ closed tPZL closed All other open SWITCH POSITION

Philips Semiconductors Product data 74F367Hex buffer/driver

2004 Jan 30 7

DIP16: plastic dual in-line package; 16 leads (300 mil) SOT38-4

Philips Semiconductors Product data 74F367Hex buffer/driver

2004 Jan 30 8

SO16: plastic small outline package; 16 leads; body width 3.9 mm SOT109-1

Philips Semiconductors Product data 74F367Hex buffer/driver

2004 Jan 30 9

REVISION HISTORY

_4 20040130 Product data (9397 750 12742). 853-0042 ECN 01-A15335 of 21 January 2004. Replaces 74F365_74F367_3 dated 2000 Jun 30 (9397 750 07283). Modifications:

  • Delete all references to 74F365 (product discontinued). _3 20000630 Product specification (9397 750 07283). ECN 853-0042 24024 of 30 June 2000. Supersedes data of 1999 Jan 08. Definitions Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Disclaimers Life support — These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes — Philips Semiconductors reserves the right to make changes in the products—including circuits, standard cells, and/or software—described or contained herein in order to improve design and/or performance. When the product is in full production (status ‘Production’), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Contact information For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825 For sales offices addresses send e-mail to:  Koninklijke Philips Electronics N.V. 2004 All rights reserved. Printed in U.S.A. Date of release: 01-04 Document order number: 9397 750 12742 /C0080 /C0115 /C0111/C0110/C0111 /C0115 Data sheet status[1] Objective data Preliminary data Product data Product status[2] [3] Development Qualification Production Definitions This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Data sheet status [1] Please consult the most recently issued data sheet before initiating or completing a design. [2] The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. [3] For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. Level I II III