74AXP1T57 NEXPERIA | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 24
Technical content
Dual supply configurable multiple function gate Rev. 5 — 3 July 2017 Product data sheet
1 General description
The 74AXP1T57 is a dual supply configurable multiple function gate with Schmitt-trigger inputs. It features three inputs (A, B and C), an output (Y) and dual supply pins (VCCI and VCCO). The inputs are referenced to VCCI and the output is referenced to VCCO. All inputs can be connected directly to VCCI or GND. VCCI can be supplied at any voltage between feature allows voltage level translation. The 74AXP1T57 can be configured as any of the following logic functions AND, OR, NAND, NOR, XNOR, inverter and buffer. This device ensures very low static and dynamic power consumption across the entire supply range and is fully specified for partial power down applications using IOFF. The IOFF circuitry disables the output, preventing the potentially damaging backflow current through the device when it is powered down.
2 Features and benefits
- Wide supply voltage range: – VCCI: 0.7 V to 2.75 V – VCCO: 1.2 V to 5.5 V
- Low input capacitance; CI = 0.6 pF (typical)
- Low output capacitance; CO = 1.8 pF (typical)
- Low dynamic power consumption; CPD = 0.6 pF at VCCI = 1.2 V (typical)
- Low dynamic power consumption; CPD = 7.1 pF at VCCO = 3.3 V (typical)
- Low static power consumption; ICCI = 0.5 μA (85 °C maximum)
- Low static power consumption; ICCO = 1.8 μA (85 °C maximum)
- High noise immunity
- Complies with JEDEC standard: – JESD8-12A.01 (1.1 V to 1.3 V; A, B, C inputs) – JESD8-11A.01 (1.4 V to 1.6 V) – JESD8-7A (1.65 V to 1.95 V) – JESD8-5A.01 (2.3 V to 2.7 V) – JESD8-C (2.7 V to 3.6 V; Y output) – JESD12-6 (4.5 V to 5.5 V; Y output)
- ESD protection: – HBM ANSI/ESDA/JEDEC JS-001 Class 2 exceeds 2 kV – CDM JESD22-C101E exceeds 1000 V
- Latch-up performance exceeds 100 mA per JESD78D Class II
- Inputs accept voltages up to 2.75 V
- Low noise overshoot and undershoot < 10 % of VCCO
- IOFF circuitry provides partial power-down mode operation
- Multiple package options
- Specified from -40 °C to +85 °C
3 Ordering information
Table 1. Ordering information
4 Marking
Table 2. Marking [1] The pin 1 indicator is located on the lower left corner of the device, below the marking code.
5 Functional diagram
Figure 1. Logic symbol Figure 2. Logic diagram
6 Pinning information
6.1 Pinning
Figure 3. Pin configuration VSSOP8 Figure 4. Pin configuration XSON8 Figure 5. Pin configuration X2SON8
6.2 Pin description
Table 3. Pin description [1] All GND pins must be connected to ground (0 V).
7 Functional description
Table 4. Function table H = HIGH voltage level; L = LOW voltage level; X = don’t care; Z = high-impedance OFF-state.
7.1 Logic configurations
Table 5. Function selection table
8 Limiting values
Table 6. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V). [1] The minimum input and output voltage ratings may be exceeded if the input and output current ratings are observed. [2] VCCO + 0.5 V should not exceed 6.0 V. [3] For SOT833-1 package: above 70 °C the value of Ptot derates linearly with 3.2 mW/K. For SOT1203 package: above 80 °C the value of Ptot derates linearly with 3.6 mW/K.
9 Recommended operating conditions
Table 7. Recommended operating conditions Voltages are referenced to GND (ground = 0 V).
10 Static characteristics
Table 8. Static characteristics At recommended operating conditions, unless otherwise specified; voltages are referenced to GND (ground = 0 V).
Table 9. Static characteristics supply current At recommended operating conditions, unless otherwise specified; voltages are referenced to GND (ground = 0 V). [1] Typical values are measured at VCCI = VCCO = 1.2 V unless otherwise specified. [2] Typical values are measured at VCCI = VCCO = 2.5 V. [3] Typical values are measured at VCCI = 1.2 V and VCCO = 5.0 V. Table 10. Typical output supply current (ICCO)
0 V 0 1 5 20 100 200 400 nA
0.8 V 1 10 150 200 300 500 800 nA
1.2 V 1 1 5 200 300 500 800 nA
1.5 V 1 1 5 100 300 500 800 nA
1.8 V 1 1 5 100 300 500 800 nA
2.5 V 1 1 5 100 100 500 800 nA
11 Dynamic characteristics
Table 11. Dynamic characteristics Voltages are referenced to GND (ground = 0 V); for test circuit, see Figure 22; for waveform, see Figure 15. [1] Typical values are measured at nominal supply voltages and Tamb = +25 °C. [2] tpd is the same as tPLH and tPHL. [3] tt is the same as tTHL and tTLH.
Table 12. Dynamic characteristics Voltages are referenced to GND (ground = 0 V); for test circuit, see Figure 22; for waveform, see Figure 15. [1] Typical values are measured at nominal supply voltages and tamb = +25 °C. [2] tpd is the same as tPLH and tPHL. [3] tt is the same as tTHL and tTLH.
Table 13. Typical dynamic characteristics at Tamb = 25 °C Voltages are referenced to GND (ground = 0 V); for test circuit, see Figure 22; for waveform, see Figure 15. [1] CPD is used to determine the dynamic power dissipation (PD in μW). CPD = power dissipation capacitance of the input supply. CPD = power dissipation capacitance of the output supply.
11.1 Waveforms and graphs
Measurement points are given in Table 14. VOL and VOH are typical output voltage levels that occur with the output load. Figure 15. Input A, B and C to output Y propagation delay times and output transition times Table 14. Measurement points Tamb = -40 °C to +85 °C unless otherwise specified. Figure 16. Additional propagation delay versus load Tamb = -40 °C to +85 °C unless otherwise specified. Figure 17. Additional propagation delay versus load
Test data is given in Table 15. RT = termination resistance should be equal to output impedance Zo of the pulse generator. CL = load capacitance including jig and probe capacitance. Figure 22. Test circuit for measuring switching times Table 15. Test data
- Plastic or metal protrusions of 0.15 mm maximum per side are not included.
- Plastic or metal protrusions of 0.25 mm maximum per side are not included.
Figure 23. Package outline SOT765-1 (VSSOP8)
- Including plating thickness.
- Can be visible in some manufacturing processes.
Figure 24. Package outline SOT833-1 (XSON8)
- Including plating thickness.
- Visible depending upon used manufacturing technology.
Figure 25. Package outline SOT1116 (XSON8)
- Including plating thickness.
- Visible depending upon used manufacturing technology.
Figure 26. Package outline SOT1203 (XSON8)
Figure 27. Package outline SOT1233 (X2SON8)
13 Abbreviations
Table 16. Abbreviations Table 17. Revision history Modifications: • Figure 27: Package outline drawing for SOT1233 / X2SON8) has changed. Modifications: • Type numbers 74AXP1T57DP and 74AXP1T57GD removed. Modifications: • Table 6: Conditions VO corrected (errata).
- Table 6: Derating values for packages added (errata).
- Table 7: Conditions VO corrected (errata).
- Table 8: Conditions IOZ corrected (errata).
- Table 9: Conditions ΔICCI corrected (errata).
- Table 11 and Table 12: Conditions tτ corrected (errata).
- Table 11: Conditions tτ corrected (errata).
- Table 13: Removed "leadless packages" from conditions (errata). 74AXP1T57 v.1 20150803 Product data sheet - -
Dual supply configurable multiple function gate Product data sheet Rev. 5 — 3 July 2017
15 Legal information
15.1 Data sheet status
Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification. [1] Please consult the most recently issued document before initiating or completing a design. [2] The term 'short data sheet' is explained in section "Definitions". [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nexperia.com.
15.2 Definitions
Draft — The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. Nexperia does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet — A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local Nexperia sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. Product specification — The information and data provided in a Product data sheet shall define the specification of the product as agreed between Nexperia and its customer, unless Nexperia and customer have explicitly agreed otherwise in writing. In no event however, shall an agreement be valid in which the Nexperia product is deemed to offer functions and qualities beyond those described in the Product data sheet.
15.3 Disclaimers
Limited warranty and liability — Information in this document is believed to be accurate and reliable. However, Nexperia does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Nexperia takes no responsibility for the content in this document if provided by an information source outside of Nexperia. In no event shall Nexperia be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Notwithstanding any damages that customer might incur for any reason whatsoever, Nexperia's aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the Terms and conditions of commercial sale of Nexperia. Right to make changes — Nexperia reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use — Nexperia products are not designed, authorized or warranted to be suitable for use in life support, life-critical or safety-critical systems or equipment, nor in applications where failure or malfunction of an Nexperia product can reasonably be expected to result in personal injury, death or severe property or environmental damage. Nexperia and its suppliers accept no liability for inclusion and/or use of Nexperia products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Applications — Applications that are described herein for any of these products are for illustrative purposes only. Nexperia makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Customers are responsible for the design and operation of their applications and products using Nexperia products, and Nexperia accepts no liability for any assistance with applications or customer product design. It is customer’s sole responsibility to determine whether the Nexperia product is suitable and fit for the customer’s applications and products planned, as well as for the planned application and use of customer’s third party customer(s). Customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products. Nexperia does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the customer’s applications or products, or the application or use by customer’s third party customer(s). Customer is responsible for doing all necessary testing for the customer’s applications and products using Nexperia products in order to avoid a default of the applications and the products or of the application or use by customer’s third party customer(s). Nexperia does not accept any liability in this respect. Limiting values — Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) will cause permanent damage to the device. Limiting values are stress ratings only and (proper) operation of the device at these or any other conditions above those given in the Recommended operating conditions section (if present) or the Characteristics sections of this document is not warranted. Constant or repeated exposure to limiting values will permanently and irreversibly affect the quality and reliability of the device. Terms and conditions of commercial sale — Nexperia products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nexperia.com/profile/terms, unless otherwise agreed in a valid written individual agreement. In case an individual agreement is concluded only the terms and conditions of the respective agreement shall apply. Nexperia hereby expressly objects to applying the customer’s general terms and conditions with regard to the purchase of Nexperia products by customer. No offer to sell or license — Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Export control — This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from competent authorities.
Dual supply configurable multiple function gate Product data sheet Rev. 5 — 3 July 2017 Non-automotive qualified products — Unless this data sheet expressly states that this specific Nexperia product is automotive qualified, the product is not suitable for automotive use. It is neither qualified nor tested in accordance with automotive testing or application requirements. Nexperia accepts no liability for inclusion and/or use of non-automotive qualified products in automotive equipment or applications. In the event that customer uses the product for design-in and use in automotive applications to automotive specifications and standards, customer (a) shall use the product without Nexperia's warranty of the product for such automotive applications, use and specifications, and (b) whenever customer uses the product for automotive applications beyond Nexperia's specifications such use shall be solely at customer’s own risk, and (c) customer fully indemnifies Nexperia for any liability, damages or failed product claims resulting from customer design and use of the product for automotive applications beyond Nexperia's standard warranty and Nexperia's product specifications. Translations — A non-English (translated) version of a document is for reference only. The English version shall prevail in case of any discrepancy between the translated and English versions.
15.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners.
Dual supply configurable multiple function gate Please be aware that important notices concerning this document and the product(s) described herein, have been included in section 'Legal information'. © Nexperia B.V. 2017. All rights reserved. For more information, please visit: http://www.nexperia.com For sales office addresses, please send an email to: salesaddresses@nexperia.com Date of release: 3 July 2017 Document identifier: 74AXP1T57