726 WILCOXON | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
Note: Due to continuous process improvement, specifications are subject to change without notice. This document is cleared for public release. Wilcoxon Sensing Technologies 8435 Progress Drive Frederick, MD 21701 USAAn Amphenol Company buy.wilcoxon.com www.wilcoxon.com Tel: +1 (301) 330-8811 Fax: +1 (301) 330-8873 info@wilcoxon.com SPECIFICATIONS 726 and 726T Compact piezoelectric accelerometers Accessories supplied: SF1 mounting stud; calibration data (level 3) Key features
- Wide frequency range
- Low noise floor
- Manufactured in ISO 9001 facility Sensitivity, ± 5%, 25°C 100 mV/g Acceleration range 80 g peak Amplitude nonlinearity 1% Frequency response: ± 5% ± 10% ± 3 dB 2.0 - 10,000 Hz 1.0 - 12,000 Hz 0.6 - 15,000 Hz Resonance frequency, mounted, nominal 32 kHz Transverse sensitivity, max 5% of axial Temperature response: –50°C +120°C –10% +5% Power requirement: Voltage source Current regulating diode 18 - 30 VDC 2 - 10 mA Electrical noise, equiv. g, nominal: Broadband 2.5 Hz to 25 kHz Spectral 10 Hz 100 Hz 1,000 Hz 10,000 Hz 60 µg 8.0 µg/√Hz 0.8 µg/√Hz 0.3 µg/√Hz 0.2 µg/√Hz Output impedance, max 100 Ω Bias output voltage, nominal 12 VDC Grounding: 726 (side connector) 726T (top connector) case grounded base isolated Temperature range –50° to +120°C Vibration limit 500 g peak Shock limit 5,000 g peak Electromagnetic sensitivity at 60 Hz 40 µg/gauss Base strain sensitivity 0.002 g/μstrain Weight: 726 726T 30 grams 34 grams Case material 316L stainless steel Mounting 10-32 tapped hole Output connector 10-32 coaxial Mating connector R1 Recommended cabling J93 98038 Rev.I.1 09/18 Model 726 0.54" dia. 0.60" dia. 1.00" 5/8" hex 10-32 coaxial connector 10-32 mounting hole Model 726T 0.62" dia. 11/16" hex 1.40" 10-32 coaxial connector 10-32 mounting hole