7064-4653 LEACH | Alldatasheet
Document overview
- Manufacturer or author: MarketingLA
- PDF pages: 5
Technical content
1PST, N.O. 50 AMP (714) 736-7598 • leachcorp.com • LINA.CustomerService@LeachCorp.com The technical information provided by Leach International Corporation is to be used as a guide only, and is not meant for publication or as documentation for altering any existing specification. Dimensions are in inches unless otherwise specified. Rev. 4/2019. Non-latching, solenoid design power contactor Qualified to MIL-PRF-6106 MS24166-D1 Contact Arrangement 1 PST N.O. PRINCIPLE TECHNICAL CHARACTERISTICS
- Contacts rated at 50 Amps / 28 Vdc
- Weight 267g max.
- Dimensions 70mm x 52mm x 62mm max.
- Special units available upon request. Application Notes: 101 102 103F 007 CONTACT ELECTRICAL CHARACTERISTICS Contact rating per pole and load type [1] Load current in Amps
28 Vdc
minimum current (Amps) 5
1PST, N.O. 50 AMP COIL CHARACTERISTICS (Vdc) GENERAL CHARACTERISTICS Notes - Applicable specification: MIL-PRF-6106 - Applicable standard number: MS24166-D1 - Special units available upon request Nominal operating voltage 28 Maximum operating voltage 29 Maximum pick-up voltage 18 Maximum drop-out voltage 7 Coil resistance ohms ±10% at +25° C 94 Ω Maximum coil current at +25° C 0.35 Amp Temperature range -55°C to +71°C Dielectric strength at sea level - Circuits to ground and circuit to circuit 1250 Vrms / 50 Hz - Across open contacts and coil to ground 1250 Vrms / 50 Hz Dielectric strength at altitude 50,000 ft 500 Vrms / 50 Hz Insulation resistance at 500 Vdc > 100 M Ω Sinusoidal vibration 2G / 55 to 500 Hz Shock 25G Maximum contact opening time under vibration and shock 2 ms Operate time at nominal voltage 20 ms max Release time at nominal voltage 10 ms max
1PST, N.O. 50 AMP SCHEMATIC DIAGRAM
1PST, N.O. 50 AMP MOUNTING STYLES Dimensions in milimeters Tolerances, unless otherwise specified: ±.079mm
1PST, N.O. 50 AMP TYPICAL CHARACTERISTICS GIVEN AS AN INDICATION