702-W REDLION | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

702-W Industrial Wireless Radio N-Tron Networking Series Industrial Wireless Radio THEI NDUSTRIALN ETWORKC OMPANY www.n-tron.com RUGGED • RELIABLE • AFFORDABLE 702-W The N-TRON® 702-W Industrial Wireless Radio provides outstanding performance and extreme reliability under the harshest industrial conditions. It is ideally suited for connecting wireless devices to a wired network or for connecting two wired networks where it is not possible, practical, or cost-effective to install cable. The 702-W provides three antennas to facilitate Multiple In, Multiple Out (MIMO) technology for increased throughput. Power over Ethernet (PoE) capability enables the unit to receive power through a Cat5e cable from a PoE sourcing device, such as N-Tron's 105TX-POE Switch or 100-PoE4 Midspan Injector. This ability makes deployments of network nodes much easier as a single Cat5e cable is all that is needed to carry both power and data. PRODUCT FEATURES

  • One 10/100BaseTX RJ-45 port
  • Three antennas for 3x3 MIMO operations
  • Four user-definable LEDs for display of signal quality
  • Radio enable, link/activity, and power LEDs
  • Station roaming
  • 802.3af PoE-powered device
  • Extended environmental specifications
  • Auto sensing 10/100BaseTX, duplex, and MDIX
  • Rugged DIN-rail enclosure
  • Redundant power inputs (10-49 VDC)
  • Web browser management Wireless Compliance
  • IEEE 802.11a Compliant
  • IEEE 802.11b Compliant
  • IEEE 802.11g Compliant
  • IEEE 802.11n Compliant Security
  • 802.11i with AES-CCM & TKIP Encryption
  • 802.1x, 64/128 bit WEP Data Rates
  • Legacy 802.11a/b/g (1-54 Mbps)
  • 802.11n (up to 300 Mbps) Range Performance
  • Indoor (antenna dependent) greater than 300m
  • Outdoor (antenna dependent) greater than 60km

APPLICATIONS

The 702-W provides a reliable wireless connection that can be quickly and easily deployed at a fraction of the cost of hardwired installations. It is also ideal for network communications between mobile devices such as forklifts, heavy equipment, laptop computers, and other devices that are impractical or impossible to connect with copper or fiber cable. Industrial Packaging and Specifications The 702-W is specifically designed to operate in industrial environments. With its rugged enclosure and industrial specifications—including redundant power inputs and expanded tolerance to shock, vibration, electrical noise and temperature fluctuations—the 702-W easily meets and exceeds the operating parameters of connected equipment. Multiple Wireless Modes The 702-W provides a number of configuration options that allow customization to suit specific applications. Station: In "station" configuration, the 702-W is used to connect a single device (MAC Address) to a wireless access point. Station, WDS (Wireless Distribution System): In "station, WDS" mode, the 702-W can be connected to a remote wired switch, allowing multiple devices (MAC Address forwarding) to be connected to the wireless access point when WDS is activated. Access Point: In "access point" mode, the 702-W serves as a wireless switch for attached wireless stations. Wireless access points are commonly used to create one wireless local area network (WLAN) that spans an area around the access point. Each access point typically supports up to 253 stations. Access Point, WDS (Wireless Distribution System): In "access point, WDS" mode, the 702-W provides wireless connections to a number of access points, expanding the coverage of the wireless network. In this configuration, the main base access point is extended using a series of relay access points in WDS mode (Extended Service Set) and, in turn, can form a WLAN consisting of thousands of stations. All stations should be configured in "station WDS" mode. Correctly configured switches using WDS will create a single network, providing station mobility throughout the wireless network. Multiple Network Modes Bridge: The 702-W will operate in Layer 2 without network segmentation. Router: The 702-W offers Layer 3 routing to allow network segmentation.

700 SERIES

www.n-tron.com 702-W Scenario 1 – Basic Bridge For added security, the 702-W supports WEP, WPA™, and WPA2™. WPA and WPA2, TKIP (Temporal Key Integrity Protocol) and CCMP (counter mode with Cipher Block Chaining Message Authentication Code Protocol) are available. Access Point: The "access point" mode allows the 702-W to serve as a wireless switch for the wireless stations attached to it. Wireless access points are commonly used to create one wireless local area network (WLAN) that spans an area around the access point. Each access point typically supports up to 253 stations. Station: In "station" configuration, the 702-W is used to connect a single device (MAC address) to a wireless access point. Scenario 2 – Control Network In station WDS mode, the 702-W can be connected to a remote wired Ethernet switch with multiple devices connected to the switch.

www.n-tron.com 702-W Scenario 3 – WDS Peering These 702-W wireless radios have been configured as peers. This topology allows forklifts, or other mobile wireless devices, to maintain communication as they move from the area covered by one 702-W into the area covered by the next 702-W. Scenario 4 – Broadband Modem Wireless Router (W/ DHCP) The 702-W configured as a powered router allows Layer 3 routing to setup network segmentation. It supports the Network Address Translation (Masquerading) feature which is widely used by access points. NAT will act as the firewall between LAN and WLAN networks. Additional firewall settings can be configured for Layer 3 packet filtering and access control in router mode. It can also act as a DHCP server, automating the assigning of IP addresses.

802.11a 5GHz DataRate Avg TX ±2dB 1-24Mbps 24 dBm 36Mbps 22 dBm 48Mbps 20 dBm 54Mbps 19 dBm 802.11b/g 2.4GHz DataRate Avg TX ±2dB 1-24Mbps 24 dBm 36Mbps 22 dBm 48Mbps 20 dBm 54Mbps 19 dBm 802.11n 2.4GHz 5GHz DataRate Avg TX ±2dB MCS0 24dBm 24dBm MCS1 24dBm 24dBm MCS2 24dBm 24dBm MCS3 22dBm 22dBm MCS4 22dBm 22dBm MCS5 22dBm 22dBm MCS6 18dBm 18dBm MCS7 15dBm 15dBm MCS8 24dBm 24dBm MCS9 24dBm 24dBm MCS10 22dBm 22dBm MCS11 20dBm 20dBm MCS12 20dBm 20dBm MCS13 17dBm 17dBm MCS14 17dBm 17dBm MCS15 15dBm 15dBm www.n-tron.com SPECIFICATIONS Physical Height: (w/o antennas): 5.2" (13.2 cm) Width: 7.4" (18.8 cm) Depth (includes DIN-Rail mount): 1.5" (3.9 cm) Weight (max): 1.9 lbs (0.9 kg) DIN-Rail Mount: 35 mm Environmental Operating Temperature: -40oC to 80oC Storage Temperature: -40oC to 85oC Operating Humidity: 5% to 95% (non condensing) Operating Altitude: 0 to 10,000 ft. N-TRON Power Supply: NTPS-24-1.3 (sold separately) Electrical Redundant Input Voltage: 10-49 VDC (regulated) Input Current (max): 200 mA max @ 24 VDC 702-W Max Power: 4.8 watts max Input Ripple: Less than 100 mV Reliability MTBF: >1 million hours Network Media 10BaseT: ≥Cat3 cable 100BaseTX: ≥Cat5 cable 802.11abgn: Air Connectors 10/100BaseTX: One (1) RJ-45 copper port; PoE-powered device support 802.11abgn: (3) RP-SMA connectors Recommended Wiring Clearance (Antenna Dependent) Front: 4" (10.2 cm) Side: 4" (10.2 cm) Top: 6" (15.3 cm) Regulatory Approvals Safety:

  • UL 508
  • ANSI/ISA-12.12.01-2013, Class I and II, Division 2 and Class III, Divisions 1 and 2 Groups A, B, C and D Hazardous Locations
  • C22.2 No. 14
  • C22.2 No. 213-M1987 Class I, Division 2 Hazardous Locations
  • Temperature code T4A 702-W Radio Output Power: Up to 250mW US Radio Receiver Sensitivity: 802.11a 5GHz DataRate Sens. ±3dB 1-24Mbps -96 dBm 36Mbps -95 dBm 48Mbps -94 dBm 54Mbps -91 dBm 802.11b/g 2.4GHz DataRate Sens. ±3dB 1-24Mbps -97 dBm 36Mbps -90 dBm 48Mbps -86 dBm 54Mbps -84 dBm 802.11n 2.4GHz 5GHz DataRate Sens. ±3dB MCS0 -97dBm -96dBm MCS1 -96dBm -95dBm MCS2 -93dBm -92dBm MCS3 -91dBm -90dBm MCS4 -87dBm -86dBm MCS5 -84dBm -83dBm MCS6 -78dBm -77dBm MCS7 -75dBm -74dBm MCS8 -96dBm -95dBm MCS9 -94dBm -93dBm MCS10 -91dBm -90dBm MCS11 -88dBm -87dBm MCS12 -85dBm -84dBm MCS13 -80dBm -79dBm MCS14 -79dBm -78dBm MCS15 -76dBm -75dBm EMI/EMC
  • FCC/CE
  • ANSI C63.4-2003
  • CFR 47, Part 15, Subpart B
  • Industry Canada ICES-003 Issue 3
  • R&TTE directive 99/5/EC
  • EN 301 489-3 V1.4.1 with respect to EN 301 489-1 V1.6.1
  • IEC 61000-4-2
  • IEC 61000-4-3 Rail
  • EN 50155, EN 50121 and EN 61373
  • GOST-R certified, RoHS compliant Designed to comply with: IEEE 1613 for Electric Utility Substations NEMA TS1/TS2 for Traffic Control

www.n-tron.com 702-W

ORDERING INFORMATION

(1) 90° RP-SMA plug (package of 3) 702-W ® 2012 N-TRON Corporation. N-Tron and the N-Tron logo are trademarks of N-TRON, Corporation. Product names mentioned herein are for identification purposes only and may be trademarks and/or registered trademarks of their respective company. The responsibility for the use and application of N-Tron products rests with the end user. N-Tron makes no warranties as to the fitness or suitability of any N-Tron product for any specific application. N-Tron Corporation shall not be liable for any damage resulting from the installation, use, or misuse of this product. Specifications subject to change without notice. REV 2013.11.07 please visit us worldwide at www.n-tron.com N-TRON USA & Corporate Headquarters 3101 International Blvd. Building 6 Mobile, AL 36606 • USA Phone +1-251-342-2164 Fax +1-251-342-6353 www.n-tron.com www.redlion.net Connect. Monitor. Control. Americas sales@redlion.net Asia-Pacific asia@redlion.net Europe Middle East Africa europe@redlion.net +1 (717) 767-6511 ADLD0293 080116 © 2016 Red Lion Controls, Inc. All rights reserved. Red Lion, the Red Lion logo, N-Tron and Sixnet are registered trademarks of Red Lion Controls, Inc. All other company and product names are trademarks of their respective owners. As the global experts in communication, monitoring and control for industrial automation and networking, Red Lion has been delivering innovative solutions for over forty years. Our automation, Ethernet and cellular M2M technology enables companies worldwide to gain real-time data visibility that drives productivity. Product brands include Red Lion, N-Tron and Sixnet. With headquarters in York, Pennsylvania, the company has offices across the Americas, Asia-Pacific and Europe. Red Lion is part of Spectris plc, the productivity-enhancing instrumentation and controls company. For more information, please visit www.redlion.net.