9000-PM

7900CPU REDLION | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

7900 Series Modular Industrial Ethernet Switch

www.n-tron.com INDUSTRIAL ETHERNET SERIES REMOTE MONITORING OPTIONS Web browser and N-View OPC (OLE for process control) server so ware provides configuration and monitoring capability. N-View software easily combines with HMI so ware to monitor network tra ffi c, alarms and trends. SNMP is also available for switch link and status monitoring. Status LEDs are con gurable to indicate power failure and N-Ring status. N-RING TECHNOLOGY Advanced N-Ring technology provides expanded capacity, detailed fault diagnos cs and fast ~30ms healing mes in rings composed of N-Tron fully managed switches. The integrity of the N-Ring is con nually monitored for error condi ons. If a fault is detected, the ring converts to a daisy chain topology and restores communica ons within ~30ms. For convenience, users can easily access a detailed ring map and fault loca on chart through the ring manager's browser or the OPC server. Each N-Ring accommodates up to 250 fully-managed N-Tron switches. N-Link easily connects mul ple rings, crea ng addi onal pathways to cri cal applica ons and increasing overall network resiliency. INDUSTRIAL SPECIFICATIONS Standard industrial product features include high MTBF, extended shock and vibra on speci ca ons, redundant power inputs and a wide opera ng temperature range. EASE OF USE N-Tron's auto sensing capabilities allow all 10/100BaseTX ports to automa cally nego ate maximum speed and performance but can also be hard coded using the user interface. A high-speed processor enables simultaneous wire speed capability on all 100BaseTX ports. The N-Tron® 7900 Industrial Ethernet Modular Switch is designed to deliver op mum performance with maximum network versa lity. Its  exible modular format allows customiza on with a variety of  ber and copper port modules. As the network evolves, port con  gura ons can easily be changed to adapt to new communica on requirements. The fully managed series is ideal for manufacturing, u li es, transporta on, energy generation, wastewater and other extreme networking environments that demand high reliability, superior noise immunity and support across extended distances. PRODUCT FEATURES

• 4 slot modular switch
• Requires 2 SFP gigabit CPU module (transceivers sold separately)
• Available modules (transceivers sold separately): - 2 port 100BaseFX  ber module - 4 port 100BaseFX  ber module - 6 port 10/100BaseTX copper module
• -20 oC to 70oC opera ng temperature
• Onboard temperature sensor
• ESD and surge protec on diodes on all copper ports
• Auto sensing 10/100BaseTX, duplex and MDIX
• Store-and-forward technology
• Rugged DIN-rail enclosure
• Redundant power inputs (10-30 VDC)
• Con  gurable bi-color fault status LEDs FULL Y MANAGED FEATURES
• SNMP v1, v2, v3 and web browser management
• EtherNet/IP ™ CIP Messaging
• Con  gura on backup via op onal SD card (order NTCD-128)
• Detailed ring map and fault loca on char ng
• N-Ring ™ Technology with ~30ms healing
• N-Link ™ Redundant N-Ring Coupling
• N-View ™ OPC monitoring
• RSTP - 802.1d, 802.1w, 802.1D
• IGMP auto con  gura on
• 802.1Q tagged VLAN and port VLAN
• 802.1p QoS, port QoS and DSCP
• LLDP (Link Layer Discovery Protocol)
• DHCP Server, Op on 82 relay, Op on 61, IP Fallback
• Port mirroring and trunking
• Local Port IP Addressing
• Port Security—MAC Address Based ͳ͵ͬͬ N-Tron Ethernet Series Fully Managed Industrial Switch www.n-tron.com INDUSTRIAL ETHERNET SERIES REMOTE MONITORING OPTIONS Web browser and N-View OPC (OLE for process control) server so ware provides configuration and monitoring capability. N-View software easily combines with HMI so ware to monitor network tra ffi c, alarms and trends. SNMP is also available for switch link and status monitoring. Status LEDs are con gurable to indicate power failure and N-Ring status. N-RING TECHNOLOGY Advanced N-Ring technology provides expanded capacity, detailed fault diagnos cs and fast ~30ms healing mes in rings composed of N-Tron fully managed switches. The integrity of the N-Ring is con nually monitored for error condi ons. If a fault is detected, the ring converts to a daisy chain topology and restores communica ons within ~30ms. For convenience, users can easily access a detailed ring map and fault loca on chart through the ring manager's browser or the OPC server. Each N-Ring accommodates up to 250 fully-managed N-Tron switches. N-Link easily connects mul ple rings, crea ng addi onal pathways to cri cal applica ons and increasing overall network resiliency. INDUSTRIAL SPECIFICATIONS Standard industrial product features include high MTBF, extended shock and vibra on speci ca ons, redundant power inputs and a wide opera ng temperature range. EASE OF USE N-Tron's auto sensing capabilities allow all 10/100BaseTX ports to automa cally nego ate maximum speed and performance but can also be hard coded using the user interface. A high-speed processor enables simultaneous wire speed capability on all 100BaseTX ports. The N-Tron® 7900 Industrial Ethernet Modular Switch is designed to deliver op mum performance with maximum network versa lity. Its  exible modular format allows customiza on with a variety of  ber and copper port modules. As the network evolves, port con  gura ons can easily be changed to adapt to new communica on requirements. The fully managed series is ideal for manufacturing, u li es, transporta on, energy generation, wastewater and other extreme networking environments that demand high reliability, superior noise immunity and support across extended distances. PRODUCT FEATURES
• 4 slot modular switch
• Requires 2 SFP gigabit CPU module (transceivers sold separately)
• Available modules (transceivers sold separately): - 2 port 100BaseFX  ber module - 4 port 100BaseFX  ber module - 6 port 10/100BaseTX copper module
• -20 oC to 70oC opera ng temperature
• Onboard temperature sensor
• ESD and surge protec on diodes on all copper ports
• Auto sensing 10/100BaseTX, duplex and MDIX
• Store-and-forward technology
• Rugged DIN-rail enclosure
• Redundant power inputs (10-30 VDC)
• Con  gurable bi-color fault status LEDs FULL Y MANAGED FEATURES
• SNMP v1, v2, v3 and web browser management
• EtherNet/IP ™ CIP Messaging
• Con  gura on backup via op onal SD card (order NTCD-128)
• Detailed ring map and fault loca on char ng
• N-Ring ™ Technology with ~30ms healing
• N-Link ™ Redundant N-Ring Coupling
• N-View ™ OPC monitoring
• RSTP - 802.1d, 802.1w, 802.1D
• IGMP auto con  gura on
• 802.1Q tagged VLAN and port VLAN
• 802.1p QoS, port QoS and DSCP
• LLDP (Link Layer Discovery Protocol)
• DHCP Server, Op on 82 relay, Op on 61, IP Fallback
• Port mirroring and trunking
• Local Port IP Addressing
• Port Security—MAC Address Based ͳ͵ͬͬ N-Tron Ethernet Series Fully Managed Industrial Switch www.n-tron.com INDUSTRIAL ETHERNET SERIES REMOTE MONITORING OPTIONS Web browser and N-View OPC (OLE for process control) server so ware provides configuration and monitoring capability. N-View software easily combines with HMI so ware to monitor network tra ffi c, alarms and trends. SNMP is also available for switch link and status monitoring. Status LEDs are con gurable to indicate power failure and N-Ring status. N-RING TECHNOLOGY Advanced N-Ring technology provides expanded capacity, detailed fault diagnos cs and fast ~30ms healing mes in rings composed of N-Tron fully managed switches. The integrity of the N-Ring is con nually monitored for error condi ons. If a fault is detected, the ring converts to a daisy chain topology and restores communica ons within ~30ms. For convenience, users can easily access a detailed ring map and fault loca on chart through the ring manager's browser or the OPC server. Each N-Ring accommodates up to 250 fully-managed N-Tron switches. N-Link easily connects mul ple rings, crea ng addi onal pathways to cri cal applica ons and increasing overall network resiliency. INDUSTRIAL SPECIFICATIONS Standard industrial product features include high MTBF, extended shock and vibra on speci ca ons, redundant power inputs and a wide opera ng temperature range. EASE OF USE N-Tron's auto sensing capabilities allow all 10/100BaseTX ports to automa cally nego ate maximum speed and performance but can also be hard coded using the user interface. A high-speed processor enables simultaneous wire speed capability on all 100BaseTX ports. The N-Tron® 7900 Industrial Ethernet Modular Switch is designed to deliver op mum performance with maximum network versa lity. Its  exible modular format allows customiza on with a variety of  ber and copper port modules. As the network evolves, port con  gura ons can easily be changed to adapt to new communica on requirements. The fully managed series is ideal for manufacturing, u li es, transporta on, energy generation, wastewater and other extreme networking environments that demand high reliability, superior noise immunity and support across extended distances. PRODUCT FEATURES
• 4 slot modular switch
• Requires 2 SFP gigabit CPU module (transceivers sold separately)
• Available modules (transceivers sold separately): - 2 port 100BaseFX  ber module - 4 port 100BaseFX  ber module - 6 port 10/100BaseTX copper module
• -20 oC to 70oC opera ng temperature
• Onboard temperature sensor
• ESD and surge protec on diodes on all copper ports
• Auto sensing 10/100BaseTX, duplex and MDIX
• Store-and-forward technology
• Rugged DIN-rail enclosure
• Redundant power inputs (10-30 VDC)
• Con  gurable bi-color fault status LEDs FULL Y MANAGED FEATURES
• SNMP v1, v2, v3 and web browser management
• EtherNet/IP ™ CIP Messaging
• Con  gura on backup via op onal SD card (order NTCD-128)
• Detailed ring map and fault loca on char ng
• N-Ring ™ Technology with ~30ms healing
• N-Link ™ Redundant N-Ring Coupling
• N-View ™ OPC monitoring
• RSTP - 802.1d, 802.1w, 802.1D
• IGMP auto con  gura on
• 802.1Q tagged VLAN and port VLAN
• 802.1p QoS, port QoS and DSCP
• LLDP (Link Layer Discovery Protocol)
• DHCP Server, Op on 82 relay, Op on 61, IP Fallback
• Port mirroring and trunking
• Local Port IP Addressing
• Port Security—MAC Address Based ͳ͵ͬͬ N-Tron Ethernet Series Fully Managed Industrial Switch

7900 Series Modular Industrial Ethernet Switch Specifications

www.n-tron.com N-TRON ͳ͵ͬͬ ETHERNET SERIES SPECIFICATIONS Regulatory Certi cations Product Safety UL 60950-1; UL 508; ANSI/ISA 12.12.01-2007; CAN/CSA-C22.2 No. 60950; CAN/CSA-C22.2 No. 142; CAN/CSA-C22.2 No. 213 Emissions FCC Title 47, Part 15, Radio Frequency Devices, Subpart B; ANSI C63.4-2003; Industry Canada ICES-003; EN 61000-6-4 (radiated and conducted) Immunity EN 61000-6-2; IEC 61000-4-2 (ESD); IEC 61000-4-3 (RFAM); IEC 61000-4-4 (EFT); IEC 61000-4-5 (SURGE); IEC 61000-4-6 (RFCM); IEC 61000-4-8 (PFMF); IEC 61000-4-11 (VDI) Other EMC Direc ve 2004/108/EC; ABS (PDA and Type Approval for Shipboard Applica ons); GOST-R Designed to comply with: IEEE 1613 for Electric U lity Substa ons Further information regarding regulatory conformity can be found on the N-Tron website at www.n-tron.com/regulatory Switch Properties Number of MAC Addresses: 8,000 Aging Time: Programmable Latency Typical: 2.6 μs Backplane Speed: 8.8 Gb/s Switching Method: Store & Forward Case Dimensions Height: 5.2" (13.0 cm) Width: 9.0" (22.8 cm) Depth: 5.6" (14.2 cm) Weight (max): ~5 lbs (2.3 kg) Din-Rail: 35 mm Electrical Redundant Input Voltage: 10-30 VDC Input Current (max): 1.53A @ 24 VDC (fully populated) BTU/hr: 125.3 @ 24 VDC (fully populated) N-Tron Power Supply: NTPS-24-5 (5A @ 24 VDC) Environmental Opera ng Temperature: -20oC to 70oC Opera ng Humidity: 10% to 95% (Non Condensing) Opera ng Al tude: 0 to 10,000 . Shock and Vibration (bulkhead mounted) Shock: 50g @ 10ms Vibra on/Seismic: 30g, 10-200 Hz, triaxial Reliability MTBF: >1 million hours Network Media 10BaseT: ≥Cat3 cable 100BaseTX: ≥Cat5 cable 100BaseFX, 1000BaseSX Mul mode: 50-62.5/125μm 100BaseFXE, 1000BaseLX Singlemode: 7-10/125μm Connectors 10/100BaseTX: Up to twenty-four (24) RJ-45 copper ports 100BaseFX: Up to sixteen (16) SC or ST  ber ports 1000BaseSX/LX SFP: Two (2) SFP LC duplex gigabit  ber ports Recommended Wiring Clearance Front: 4" (10.2 cm) Side: 1" (2.6 cm) Fiber Transceiver Characteristics Fiber Length 2km* 15km 40km 80km** TX Power Min -19dBm -15dBm -5dBm -5dBm RX Sensitivity Max -31dBm -31dBm -34dBm -34dBm Wavelength 1310nm 1310nm 1310nm 1550nm * Multimode Fiber Optic Cable ** Singlemode Fiber Optic Cable Fiber Length 550m for 50/125μm TX Power Min -9.5dBm -9.5dBm -2dBm 0dBm RX Sensitivity Max -17dBm -20dBm -22dBm -24dBm Wavelength 850nm 1310nm 1310nm 1550nm SFP Gigabit Fiber Transceiver Characteristics * Multimode Fiber Optic Cable ** Singlemode Fiber Optic Cable www.n-tron.com N-TRON ͳ͵ͬͬ ETHERNET SERIES SPECIFICATIONS Regulatory Certi cations Product Safety UL 60950-1; UL 508; ANSI/ISA 12.12.01-2007; CAN/CSA-C22.2 No. 60950; CAN/CSA-C22.2 No. 142; CAN/CSA-C22.2 No. 213 Emissions FCC Title 47, Part 15, Radio Frequency Devices, Subpart B; ANSI C63.4-2003; Industry Canada ICES-003; EN 61000-6-4 (radiated and conducted) Immunity EN 61000-6-2; IEC 61000-4-2 (ESD); IEC 61000-4-3 (RFAM); IEC 61000-4-4 (EFT); IEC 61000-4-5 (SURGE); IEC 61000-4-6 (RFCM); IEC 61000-4-8 (PFMF); IEC 61000-4-11 (VDI) Other EMC Direc ve 2004/108/EC; ABS (PDA and Type Approval for Shipboard Applica ons); GOST-R Designed to comply with: IEEE 1613 for Electric U lity Substa ons Further information regarding regulatory conformity can be found on the N-Tron website at www.n-tron.com/regulatory Switch Properties Number of MAC Addresses: 8,000 Aging Time: Programmable Latency Typical: 2.6 μs Backplane Speed: 8.8 Gb/s Switching Method: Store & Forward Case Dimensions Height: 5.2" (13.0 cm) Width: 9.0" (22.8 cm) Depth: 5.6" (14.2 cm) Weight (max): ~5 lbs (2.3 kg) Din-Rail: 35 mm Electrical Redundant Input Voltage: 10-30 VDC Input Current (max): 1.53A @ 24 VDC (fully populated) BTU/hr: 125.3 @ 24 VDC (fully populated) N-Tron Power Supply: NTPS-24-5 (5A @ 24 VDC) Environmental Opera ng Temperature: -20oC to 70oC Opera ng Humidity: 10% to 95% (Non Condensing) Opera ng Al tude: 0 to 10,000 . Shock and Vibration (bulkhead mounted) Shock: 50g @ 10ms Vibra on/Seismic: 30g, 10-200 Hz, triaxial Reliability MTBF: >1 million hours Network Media 10BaseT: ≥Cat3 cable 100BaseTX: ≥Cat5 cable 100BaseFX, 1000BaseSX Mul mode: 50-62.5/125μm 100BaseFXE, 1000BaseLX Singlemode: 7-10/125μm Connectors 10/100BaseTX: Up to twenty-four (24) RJ-45 copper ports 100BaseFX: Up to sixteen (16) SC or ST  ber ports 1000BaseSX/LX SFP: Two (2) SFP LC duplex gigabit  ber ports Recommended Wiring Clearance Front: 4" (10.2 cm) Side: 1" (2.6 cm) Fiber Transceiver Characteristics Fiber Length 2km* 15km 40km 80km** TX Power Min -19dBm -15dBm -5dBm -5dBm RX Sensitivity Max -31dBm -31dBm -34dBm -34dBm Wavelength 1310nm 1310nm 1310nm 1550nm * Multimode Fiber Optic Cable ** Singlemode Fiber Optic Cable Fiber Length 550m for 50/125μm TX Power Min -9.5dBm -9.5dBm -2dBm 0dBm RX Sensitivity Max -17dBm -20dBm -22dBm -24dBm Wavelength 850nm 1310nm 1310nm 1550nm SFP Gigabit Fiber Transceiver Characteristics * Multimode Fiber Optic Cable ** Singlemode Fiber Optic Cable www.n-tron.com N-TRON ͳ͵ͬͬ ETHERNET SERIES SPECIFICATIONS Regulatory Certi cations Product Safety UL 60950-1; UL 508; ANSI/ISA 12.12.01-2007; CAN/CSA-C22.2 No. 60950; CAN/CSA-C22.2 No. 142; CAN/CSA-C22.2 No. 213 Emissions FCC Title 47, Part 15, Radio Frequency Devices, Subpart B; ANSI C63.4-2003; Industry Canada ICES-003; EN 61000-6-4 (radiated and conducted) Immunity EN 61000-6-2; IEC 61000-4-2 (ESD); IEC 61000-4-3 (RFAM); IEC 61000-4-4 (EFT); IEC 61000-4-5 (SURGE); IEC 61000-4-6 (RFCM); IEC 61000-4-8 (PFMF); IEC 61000-4-11 (VDI) Other EMC Direc ve 2004/108/EC; ABS (PDA and Type Approval for Shipboard Applica ons); GOST-R Designed to comply with: IEEE 1613 for Electric U lity Substa ons Further information regarding regulatory conformity can be found on the N-Tron website at www.n-tron.com/regulatory Switch Properties Number of MAC Addresses: 8,000 Aging Time: Programmable Latency Typical: 2.6 μs Backplane Speed: 8.8 Gb/s Switching Method: Store & Forward Case Dimensions Height: 5.2" (13.0 cm) Width: 9.0" (22.8 cm) Depth: 5.6" (14.2 cm) Weight (max): ~5 lbs (2.3 kg) Din-Rail: 35 mm Electrical Redundant Input Voltage: 10-30 VDC Input Current (max): 1.53A @ 24 VDC (fully populated) BTU/hr: 125.3 @ 24 VDC (fully populated) N-Tron Power Supply: NTPS-24-5 (5A @ 24 VDC) Environmental Opera ng Temperature: -20oC to 70oC Opera ng Humidity: 10% to 95% (Non Condensing) Opera ng Al tude: 0 to 10,000 . Shock and Vibration (bulkhead mounted) Shock: 50g @ 10ms Vibra on/Seismic: 30g, 10-200 Hz, triaxial Reliability MTBF: >1 million hours Network Media 10BaseT: ≥Cat3 cable 100BaseTX: ≥Cat5 cable 100BaseFX, 1000BaseSX Mul mode: 50-62.5/125μm 100BaseFXE, 1000BaseLX Singlemode: 7-10/125μm Connectors 10/100BaseTX: Up to twenty-four (24) RJ-45 copper ports 100BaseFX: Up to sixteen (16) SC or ST  ber ports 1000BaseSX/LX SFP: Two (2) SFP LC duplex gigabit  ber ports Recommended Wiring Clearance Front: 4" (10.2 cm) Side: 1" (2.6 cm) Fiber Transceiver Characteristics Fiber Length 2km* 15km 40km 80km** TX Power Min -19dBm -15dBm -5dBm -5dBm RX Sensitivity Max -31dBm -31dBm -34dBm -34dBm Wavelength 1310nm 1310nm 1310nm 1550nm * Multimode Fiber Optic Cable ** Singlemode Fiber Optic Cable Fiber Length 550m for 50/125μm TX Power Min -9.5dBm -9.5dBm -2dBm 0dBm RX Sensitivity Max -17dBm -20dBm -22dBm -24dBm Wavelength 850nm 1310nm 1310nm 1550nm SFP Gigabit Fiber Transceiver Characteristics * Multimode Fiber Optic Cable ** Singlemode Fiber Optic Cable www.n-tron.com N-TRON ͳ͵ͬͬ ETHERNET SERIES SPECIFICATIONS Regulatory Certi cations Product Safety UL 60950-1; UL 508; ANSI/ISA 12.12.01-2007; CAN/CSA-C22.2 No. 60950; CAN/CSA-C22.2 No. 142; CAN/CSA-C22.2 No. 213 Emissions FCC Title 47, Part 15, Radio Frequency Devices, Subpart B; ANSI C63.4-2003; Industry Canada ICES-003; EN 61000-6-4 (radiated and conducted) Immunity EN 61000-6-2; IEC 61000-4-2 (ESD); IEC 61000-4-3 (RFAM); IEC 61000-4-4 (EFT); IEC 61000-4-5 (SURGE); IEC 61000-4-6 (RFCM); IEC 61000-4-8 (PFMF); IEC 61000-4-11 (VDI) Other EMC Direc ve 2004/108/EC; ABS (PDA and Type Approval for Shipboard Applica ons); GOST-R Designed to comply with: IEEE 1613 for Electric U lity Substa ons Further information regarding regulatory conformity can be found on the N-Tron website at www.n-tron.com/regulatory Switch Properties Number of MAC Addresses: 8,000 Aging Time: Programmable Latency Typical: 2.6 μs Backplane Speed: 8.8 Gb/s Switching Method: Store & Forward Case Dimensions Height: 5.2" (13.0 cm) Width: 9.0" (22.8 cm) Depth: 5.6" (14.2 cm) Weight (max): ~5 lbs (2.3 kg) Din-Rail: 35 mm Electrical Redundant Input Voltage: 10-30 VDC Input Current (max): 1.53A @ 24 VDC (fully populated) BTU/hr: 125.3 @ 24 VDC (fully populated) N-Tron Power Supply: NTPS-24-5 (5A @ 24 VDC) Environmental Opera ng Temperature: -20oC to 70oC Opera ng Humidity: 10% to 95% (Non Condensing) Opera ng Al tude: 0 to 10,000 . Shock and Vibration (bulkhead mounted) Shock: 50g @ 10ms Vibra on/Seismic: 30g, 10-200 Hz, triaxial Reliability MTBF: >1 million hours Network Media 10BaseT: ≥Cat3 cable 100BaseTX: ≥Cat5 cable 100BaseFX, 1000BaseSX Mul mode: 50-62.5/125μm 100BaseFXE, 1000BaseLX Singlemode: 7-10/125μm Connectors 10/100BaseTX: Up to twenty-four (24) RJ-45 copper ports 100BaseFX: Up to sixteen (16) SC or ST  ber ports 1000BaseSX/LX SFP: Two (2) SFP LC duplex gigabit  ber ports Recommended Wiring Clearance Front: 4" (10.2 cm) Side: 1" (2.6 cm) Fiber Transceiver Characteristics Fiber Length 2km* 15km 40km 80km** TX Power Min -19dBm -15dBm -5dBm -5dBm RX Sensitivity Max -31dBm -31dBm -34dBm -34dBm Wavelength 1310nm 1310nm 1310nm 1550nm * Multimode Fiber Optic Cable ** Singlemode Fiber Optic Cable Fiber Length 550m for 50/125μm TX Power Min -9.5dBm -9.5dBm -2dBm 0dBm RX Sensitivity Max -17dBm -20dBm -22dBm -24dBm Wavelength 850nm 1310nm 1310nm 1550nm SFP Gigabit Fiber Transceiver Characteristics * Multimode Fiber Optic Cable ** Singlemode Fiber Optic Cable

www.n-tron.com N-TRON ͳ͵ͬͬ ETHERNET SERIES MECHANICAL DRAWINGS www.n-tron.com N-TRON ͳ͵ͬͬ ETHERNET SERIES MECHANICAL DRAWINGS

mode Fiber Port Slide-in Module onal clips—3 total—for increased stability) Where: E = Singlemode XX = ST or SC connector YY = 15, 40, or 80 for singlemode, blank for mul mode ZZ = 10, 40, or 80 for GB singlemode (if SFP transceiver is not speci ed at the me of purchase, slots will remain blank with covers) ® 2012 N-TRON Corporation. N-Tron and the N-Tron logo are trademarks of N-TRON Corporation. Product names mentioned herein are for identifi cation purposes only and may be trademarks and/or registered trademarks of their respective company. The responsibility for the use and application of N-Tron products rests with the end user. N-Tron makes no warranties as to the fi tness or suitability of any N-Tron product N-Tron’s award-winning products deliver excep onal performance for mission-cri cal data acquisi on and control applica ons. Off ering a complete line of high-quality ruggedized Ethernet and wireless solu ons for industrial automa on, N-Tron products are designed and manufactured in the United States with a global sales and service network that supports customers worldwide. For more informa on, visit www.n-tron.com, call +1 (251) 342-2164 or email info@n-tron.com www.redlion.net Connect. Monitor. Control. Americas sales@redlion.net Asia-Pacific asia@redlion.net Europe Middle East Africa europe@redlion.net +1 (717) 767-6511 ADLD0260 080116 © 2016 Red Lion Controls, Inc. All rights reserved. Red Lion, the Red Lion logo, N-Tron and Sixnet are registered trademarks of Red Lion Controls, Inc. All other company and product names are trademarks of their respective owners. As the global experts in communication, monitoring and control for industrial automation and networking, Red Lion has been delivering innovative solutions for over forty years. Our automation, Ethernet and cellular M2M technology enables companies worldwide to gain real-time data visibility that drives productivity. Product brands include Red Lion, N-Tron and Sixnet. With headquarters in York, Pennsylvania, the company has offices across the Americas, Asia-Pacific and Europe. Red Lion is part of Spectris plc, the productivity-enhancing instrumentation and controls company. For more information, please visit www.redlion.net.