684-312-04 MARL | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
How to Order: Telephone +44 (0)1229 582430 Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a represent ation relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply for products or service. PART NUMBER COLOUR LENS VOLTAGE CURRENT LUMINOUS WAVE OPERATING STORAGE DC (Vdc) DC (mA) INTENSITY LENGTH TEMP TEMP Vopr lopr lv@20mA (mcd) lp (nm) Topr Tstg 684-312-04 Green Water Clear 2.2 20 120 565 -40 ~ +85^ -40 ~ +85 Yes 684-301-04 Red Water Clear 1.9 20 900 660 -40 ~ +85^ -40 ~ +85 Yes 684-325-04 Yellow Water Clear 2.1 20 4300 590 -30 ~ +85^ -40 ~ +120 Yes 684-324-04 Green Water Clear 3.4 20 7800 525 -30 ~ +85^ -40 ~ +100 Yes 684-934-04 Blue Water Clear 3.6 20 2300 470 -30 ~ +85^ -40 ~ +100 Yes 684-998-04 Cool White Water Clear 3.6 20 4600 see below -30 ~ +85^ -40 ~ +100 Yes UNITS Vdc mA mcd nm °C °C l Black anodised aluminium housing l Unique rear mounting indicator l Sealed to IP67 l Suitable for high vibration applications PROFESSIONAL LED INDICATORS Ø6.35mm Mounting SAMPLES AVAILABLE© MARL INTERNATIONAL LTD 2006 : DS 053/06 Issue 2 Ordering Information & Typical Technical Characteristics (Ta = 25°C) Mean Time Between Failure = 100,000 Hours. Luminous intensity figures refer to the unmodified discrete LED.
FEATURES
684 SERIES
PACK QUANTITY = 10 PIECES Page 1 of 3 ^ = Products must be derated according to the derating information. Each derating graph refers to specific LEDs. Intensities (lv) and colour shades of white (x,y co-ordinates) may vary between LEDs within a batch. 998 *Typical emission colour cool white x 0.296 0.283 0.330 0.330 y 0.276 0.305 0.339 0.318
MATERIALS PUSH-ON CONNECTORS Body Black Anodised Aluminium Nut Black Anodised Aluminium Panel Seal Nitrile Lens Epoxy Encapsulation PC5430 resin Lock Washer Spring Steel TECHNICAL CHARACTERISTICS OPTIONAL FLYING LEAD TERMINATIONS ORDER SUPPLY WIRE WIRE NO/DIAMETER DIAMETER COMMENTS CODE VOLTAGE COLOUR LENGTH OF OVER SUFFIX CONDUCTORS INSULATION
15 DC Products Red-anode / Black-cathode 150mm
19/0.15mm 1.2mm lengths
19 DC Products Red-anode / Black-cathode 1000mm available
For use with 684 series lamps Dimensions in mm (Typical) Not to scale Page 2 of 3 Anode termination indicated by long pin. Mountng Hole to be clean and burr free. BS EN ISO 9001:2000 Approved Manufacturer Telephone +44 (0)1229 582430 Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a represent ation relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply for products or service. © MARL INTERNATIONAL LTD 2006 : DS 053/06 Issue 2 Dimensions in mm (Typical) Not to scale SERIES MAXIMUM MAXIMUM PANEL NUT MINIMUM MIN/MAX. POWER REVERSE CUTOUT MOUNTING MOUNTING PANEL DISSIPATION VOLTAGE TORQUE CENTRES THICKNESS mW Vdc mm Nm mm mm MOUNTING HOLE
324, 934 & 998 Page 3 of 3 BS EN ISO 9001:2000 Approved Manufacturer Telephone +44 (0)1229 582430 Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a represent ation relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply for products or service. © MARL INTERNATIONAL LTD 2006 : DS 053/06 Issue 2