67A-DF-3C-030C GRAYHILL | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com Joysticks Joysticks SERIES 67A Hall Effect Joystick

FEATURES

  • Proportional output
  • Shaft and panel seal to IP67
  • Compact: 1-inch square flange
  • Long operational life
  • RoHS compliant

APPLICATIONS

  • Medical
  • Military vehicles and devices
  • Mobile electronics for outdoor use DIMENSIONS in inches (and millimeters) Ø1.007±.003 [Ø25,58±0,07] 4X HOLE FOR #2 SCREW, SELF-TAPPING OR MACHINE THREAD SQUARE 1.000 25,4[ ] T Y P. .500 12,7[ ] SQUARE 1.300 33,02[ ] SQUARE 1.000 25,4[ ] Ø

4 PLACES

.100 2,54[ ] R .100 2,54[ ] C-BORE, 4 PLACES Ø .070 [1,78] .180 4,57[ ] RECOMMENDED PANEL CUTOUT TRIANGLE INDICATES +Y DIRECTION FOR JOYSTICK OUTPUT SHAFT TRAVEL ANY DIRECTION 20° .120 3,05[ ] SHAFT PIVOT POINT .087 2,21[ ] 1.115 28,32[ ] .727 18,47[ ] MOUNTING SURFACE CONNECTOR IS AMP , P/N 7-215083-6 Ø.520 13,21[ ] Ø1.000 25,4[ ] .560 14,21[ ] PIN HEADER VERSION DEGREES SHAFT TRAVEL, ° JOYSTICK OUTPUT ALONG X OR Y AXIS -80 -20 JOYSTICK OUTPUT WAVEFORM NOT TO SCALE JOYSTICK OPERATIONAL LIMITS TRIANGLE MARKING ON MOUNTING BRACKET INDICATES +Y DIRECTION FOR JOYSTICK OUTPUT (0,80) (0,-80) (80,0) (-80,0) (0,1) (0,-1) (1,0) (-1,0) SLEEP ZONE NOT TO SCALE

Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com Joysticks Joysticks

ORDERING INFORMATION

For prices and custom configurations, contact a local sales office, an authorized distributor, or Grayhill's sales department. Termination: C = .050 Cable with Connector, P = .050 Pin Header 67A - DF- 3C - 030C Cable Length: 020 = 2.0 inches through 6.0 inches (060). 1 inch increments Leave blank if pinned. Example: 67A-DF-3C-P Interface: C = 12C Voltage: 3 = 3.3V Knob Style: F = Fingertip Number of Axes: D = Dual Axis (X&Y) Grayhill Series Number SPECIFICATIONS Electrical Ratings Supply Voltage (VVD): 3.3V ± .0.3V High Level Input Voltage (VIH, Min): 0.7*VDD on SCL & SDA / 0.25*VDD+0.8 on Aln Low Level Input Voltage (VIL, Max): 0.3*VDD on SCL & SDA / 0.15*VDD on Aln Current Draw In Active Mode (IDDI): 3mA Maximum @ VDD = 3.3V Current Draw In Sleep Mode (IDD2): 100uA Maximum @ VDD = 3.3V Maximum Current Sunk By Any I/O Pin: 25mA Leakage Current: ±5 nA Typ., ±125 nA Max Low Level Output Voltage (VOL): 0.6V On INTn & SDA @ IOL = 6mA, @ VDD = 3.3V Measurement Frequency (Active Mode): 50 Samples/Sec Response Time, Active Mode (T1): 20ms* Response Time, Sleep Mode (T2): 80ms* Output @ Maximum Joystick Deflection (XMax, YMax): 80 Units Output With Joystick Shaft Released (Cen- ter Position): (0,0) Nominal Startup Time (TP, W): 300ms, Max Physical & Mechanical Ratings Vibration: Random, Tested per MIL-STD-810G, Method 514.6, Procedure I Mechanical Shock: Tested per MIL-STD 202, Method 213B Test Condition A Transit Drop: Tested per MIL-ST-810G, Method 516.6, Procedure II Terminal Strength: 10 lbs. Minimum, Tested per MIL-STD-202, Method 211A Push-Out Force: 60 lbs. Minimum Pull-Out Force: 60 lbs. Minimum Shaft Impact: 0.5 lbs. Weight dropped 20x from height of 1m Shaft Side-Load: 45 lbs. Minimum Mounting Torque: 3-5 in-lbs recommended, 8 in-lbs. Maximum Joystick Actuation Force: 300g Peak ± 25% Joystick Life: 1 million cycles minimum** Environmental Ratings Seal: IP67, Tested per IEC 60529 Altitude: Tested per MIL-STD 202, Method 105C Thermal Shock: Tested per MIL-STD 202, Method 107G Operating High Temperature: +85°C, Tested per IEC 68-2-14, Test Na Operating Low Temperature: -40°C, Tested per IEC 68-2-14, Test Na Storage High Temperature: +100°C, Tested per IEC 68-2-2, Method Ba Storage Low Temperature: -55°C, Tested per IEC 68-2-1, Method Aa Humidity: Tested per MIL-STD 202, Method 103B Humidity, 85/85: Tested per MIL-STD 202, Method 103B, 500 hours Solar Radiation: Tested per MIL-STD 810G, Method 505.5, Procedure II Chemical Resistance: Tested per ISO 16750-5 Dielectric: Tested per MIL-STD 202G, Method 301 Insulation Resistance: Tested per MIL-STD 202G, Method 302 EMC Ratings Radiated Immunity: Tested per IEC 61000-4-3 Conducted Immunity: Tested per IEC 61000-4-6 Radiated Emissions: Tested per ANSI C63.4 Conducted Emissions: Tested per EN 55022 Electrostatic Discharge: Tested per IEC 61000-4-2 Power Frequency Magnetic Field: Tested per IEC 61000-4-8 *Response time is the time from joystick movement to when new X,Y position data is available. **One cycle is defined as a complete revolution of the shaft around the fixed perimeter, or one actuation in each of the 4 main directions, with return to center between each actuation. Block Diagram