676-501-21 MARL | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

How to Order: • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a represent ation relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply for products or service. PART NUMBER COLOUR LENS VOLTAGE CURRENT LUMINOUS WAVE OPERATING STORAGE DC (Vdc) DC (mA) INTENSITY LENGTH TEMP TEMP Vopr lopr lv@20mA (mcd) lp (nm) Topr Tstg 676-501-21 Red Smoked 12 20 11000 643 -40 ~ +95^ -40 ~ +100 Yes 676-521-21 Yellow Smoked 12 20 16000 591 -40 ~ +95^ -40 ~ +100 Yes 676-532-21 Green Smoked 12 20 23000 527 -40 ~ +95^ -40 ~ +100 Yes 676-930-21 Blue Smoked 12 20 7000 470 -40 ~ +95^ -40 ~ +100 Yes 676-997-21 Cool White Smoked 12 20 14000 see below -40 ~ +95^ -40 ~ +100 Yes 676-501-23 Red Smoked 24-28 20 11000 643 -40 ~ +95^ -40 ~ +100 Yes 676-521-23 Yellow Smoked 24-28 20 16000 591 -40 ~ +95^ -40 ~ +100 Yes 676-532-23 Green Smoked 24-28 20 23000 527 -40 ~ +95^ -40 ~ +100 Yes 676-930-23 Blue Smoked 24-28 20 7000 470 -40 ~ +95^ -40 ~ +100 Yes 676-997-23 Cool White Smoked 24-28 20 14000 see below -40 ~ +95^ -40 ~ +100 Yes UNITS Vdc mA mcd nm °C °C l Black anodised aluminium housing l Sealed to IP67 l Smoked lens for good on/off contrast ratio l Internally potted for use in high vibration applications l Internal reverse protection diode fitted as standard in all voltage models. l Wide viewing angle PROFESSIONAL LED INDICATORS Ø 8.1mm Mounting SAMPLES AVAILABLE© MARL INTERNATIONAL LTD 2007 : DS 050/06 Issue 2 Ordering Information & Typical Technical Characteristics (Ta = 25°C) Mean Time Between Failure = 100,000 Hours. Luminous intensity figures refer to the unmodified discrete LED.

FEATURES

676 SERIES

PACK QUANTITY = 10 PIECES Page 1 of 3 Other voltages AC/DC available. Please contact our Technical Sales. ^ = Products must be derated according to the derating information. Each derating graph refers to specific LEDs. Intensities (lv) and colour shades of white (x,y co-ordinates) may vary between LEDs within a batch. 997F-C *Typical emission colour cool white x 0.245 0.361 0.356 0.264 y 0.229 0.385 0.351 0.220

Body Black anodised aluminium Nut Bright Nickel Plated Brass Panel Seal Viton Termination Tags Silver Flash Coated Brass Lens Polycarbonate Encapsulation PC5430 resin Lock Washer Spring Steel MATERIALS PUSH-ON CONNECTORS TECHNICAL CHARACTERISTICS OPTIONAL FLYING LEAD TERMINATIONS SERIES MAXIMUM MAXIMUM PANEL NUT MINIMUM MIN/MAX. POWER REVERSE CUTOUT MOUNTING MOUNTING PANEL DISSIPATION VOLTAGE TORQUE CENTRES THICKNESS UNITS mW Vdc mm Nm mm mm * = Current Version • = Voltage Version ORDER SUPPLY WIRE WIRE NO/DIAMETER DIAMETER COMMENTS CODE VOLTAGE COLOUR LENGTH OF OVER SUFFIX CONDUCTORS INSULATION

15 DC Products Red-anode / Black-cathode 150mm

15 AC Products Brown-live / Blue-neutral 150mm Customised

19/0.15mm 1.2mm lengths

19 DC Products Red-anode / Black-cathode 1000mm available

19 AC Products Brown-live / Blue-neutral 1000mm

925-000-00 is brass tin plated. For use with 676 series lamps. Dimensions in mm (Typical) Not to scale Page 2 of 3 Anode termination indicated by red sleeve Mounting hole to be clean and burr free. BS EN ISO 9001:2000 Approved Manufacturer • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a represent ation relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply for products or service. Dimensions in mm (Typical) Not to scale © MARL INTERNATIONAL LTD 2007 : DS 050/06 Issue 2 MOUNTING HOLE

501 & 521 532, 930 & 997 Page 3 of 3 BS EN ISO 9001:2000 Approved Manufacturer • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a represent ation relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply for products or service. © MARL INTERNATIONAL LTD 2007 : DS 050/06 Issue 2