665-501-04-50 MARL | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
How to Order: Telephone +44 (0)1229 582430 Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a represent ation relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply for products or service. PART NUMBER COLOUR LENS VOLTAGE CURRENT LUMINOUS WAVE OPERATING STORAGE DC (Vdc) DC (mA) INTENSITY LENGTH TEMP TEMP Vopr lopr lv@20mA (mcd) lp (nm) Topr Tstg 665-501-04-50 Red Colour Diffused 2.0 20 11000 643 -40 ~ +95^ -40 ~ +100 Yes 665-521-04-50 Yellow Colour Diffused 2.1 20 16000 591 -40 ~ +95^ -40 ~ +100 Yes 665-532-04-50 Green Colour Diffused 3.4 20 23000 527 -40 ~ +95^ -40 ~ +100 Yes 665-930-04-50 Blue Colour Diffused 3.4 20 7000 470 -40 ~ +95^ -40 ~ +100 Yes 665-997-04-50 Cool White Colour Diffused 3.4 20 14000 *see below -40 ~ +95^ -40 ~ +100 Yes UNITS Vdc mA mcd nm °C °C l Hard black anodised aluminium housing l Short body length is ideal for portable equipment l Unique hexagon bezel to aid mounting to p anel l Unique PTFE mounting/panel seal l Sealed to IP68 (10psi) to BS5420 l Suitable for high vibration applications l Ideal for marine applications PROFESSIONAL LED INDICATORS Ø8.5mm Mounting SAMPLES AVAILABLE© MARL INTERNATIONAL LTD 2007 : DS 024/07 Issue 1 Ordering Information & Typical Technical Characteristics (Ta = 25°C) Mean Time Between Failure = 100,000 Hours. Luminous intensity figures refer to the unmodified discrete LED.
FEATURES
665 SERIES
PACK QUANTITY = 10 PIECES Page 1 of 3 ^ = Products must be derated according to the derating information. Each derating graph refers to specific LEDs. Appropriate LED numbers shown - Refer to p age 3 Intensities (lv) and colour shades of white (x,y co-ordinates) may vary between LEDs within a batch. 997F-C *Typical emission colour cool white x 0.245 0.361 0.356 0.264 y 0.229 0.385 0.351 0.220 BS EN ISO 9001:2000 Approved Manufacturer
Body: Hard Black Anodised Aluminium. Anodised to Def Stan 03/26 50microns Nut: Bright Nickel Plated Brass Panel Seal: PTFE Fresnel lens: Polycarbonate Encapsulation: PC5430 resin Lock Washer: Spring Steel Termination Wires: Def Stan61/12, Part 18 chemical and flame ret ardent. SERIES MAXIMUM MAXIMUM PANEL NUT MINIMUM MIN/MAX. POWER REVERSE CUTOUT MOUNTING MOUNTING PANEL DISSIPATION VOLTAGE TORQUE CENTRES THICKNESS mW Vdc mm Nm mm mm Page 2 of 3 Mounting hole to be clean and burr free BS EN ISO 9001:2000 Approved Manufacturer Telephone +44 (0)1229 582430 Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a represent ation relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply for products or service. Dimensions in mm (Typical) Not to scale © MARL INTERNATIONAL LTD 2007: DS 024/07 Issue 1 MOUNTING HOLE
How to Order: Telephone +44 (0)1229 582430 Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a represent ation relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply for products or service. SAMPLES AVAILABLE© MARL INTERNATIONAL LTD 2007 : DS 024/07 Issue 1 Page 3 of 3 BS EN ISO 9001:2000 Approved Manufacturer Derating Information 501 & 521 532, 930 & 997