DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION  725 E.Walnut St., Garland, TX 75040  (972)272-3571  Fax (972)487-6918 www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM

66296 PROTON RADIATION TOLERANT

QUAD CHANNEL, 20 PIN LCC, TRANSISTOR OUTPUT OPTOCOUPLER OPTOELECTRONIC PRODUCTS DIVISION 08/14/2015 Features:  850 nm Proton Radiation Tolerant LEDs  High Reliability  Base lead provided for conventional transistor biasing  +1 kVdc electrical isolation  Screening available Applications:  Eliminate ground loops  Level shifting  Line receiver  Switching power supplies  Motor control

DESCRIPTION

The Mii 66296 is a quad optocoupler, consisting of four 850 nm GaAlAs LEDs that have proven to be highly tolerant to proton radiation and four silicon phototransistors mounted and coupled in a miniature surface mount hermetic leadless chip carrier. Each unit contains four channels. These solid state couplers are ideal for designs where board space and device weight are important design considerations. ABSOLUTE MAXIMUM RATINGS Notes: 1. Measured with Inputs shorted together and outputs shorted together. 2. Derate linearly at the rate of 0.67 mW/°C above 65°C case. 3. Derate linearly at the rate of 2.3 mW/°C above 65°C case. Package Dimensions Schematic Diagram ALL DIMENSIONS ARE IN INCHES [MILLIMETERS] PIN 1 XXXX PIN 16 0.050 [1.27] REF. TYP. 0.085 [2.16] REF. 0.075 [1.91] REF TYP. 7K2 K4 189 B2 10 E2 B14

11 C2 17

6 C1 13

Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible.

MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION  725 E.Walnut St., Garland, TX 75040  (972)272-3571  Fax (972)487-6918 www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM

66296 PROTON RADIATION TOLERANT QUAD CHANNEL, 20 PIN LCC,

TRANSISTOR OUTPUT OPTOCOUPLER 08/14/2015

ELECTRICAL CHARACTERISTICS

TA = 25C unless otherwise specified. PARAMETER SYMBOL MIN TYP MAX UNITS TEST CONDITIONS NOTE Input Diode Static Reverse Current IR 8 µA VR = 6 V 2 Input Diode Forward Voltage -55 °C +25C +100C VF 0.8 0.8 0.8 1.8 1.6 1.4 V I F = 10 mA 2 OUTPUT TRANSISTOR TA = 25C unless otherwise specified. Collector-Base Breakdown Voltage V (BR)CBO 45 V I C = 100 A, IE = 0, IF = 0 2 Collector-Emitter Breakdown Voltage V(BR)CEO 40 V I C = 1 mA, IB = 0, IF = 0 2 Emitter-Base Breakdown Voltage V(BR)EBO 7 V I C = 0 mA, IE = 100 A, IF = 0 2 COUPLED CHARACTERISTICS TA = 25C unless otherwise specified. On State Collector Current Ta = +25°C IC(ON) 2.0 mA V CE = 5 V, IB = 0, IF = 1mA 2 On State Collector Current Ta = -55C IC(ON) 2.0 mA V CE = 5 V, IB = 0, IF = 2 mA 2 On State Collector Current Ta = +100C IC(ON) 2.0 mA V CE = 5 V, IB = 0, IF = 2 mA 2 Off State Collector Current I C(OFF) 100 nA V CE = 20 V, IB = 0, IF = 0 mA 2 Off State Collector Current, Ta = +100C IC(OFF) 100 A V CE = 20 V, IB = 0, IF = 0 mA 2 Collector-Emitter Saturation Voltage V CE(SAT) 0.3 V I F = 2 mA, IC = 2 mA, IB = 0 2 Input to Output Current I IO 1.0 A V IN-OUT = 1 kV 1 Input to Output Capacitance C IO 5 pF F = 1 MHz, V IN-OUT = 0 1 Rise Time or Fall Time t r or tf 10 20 s VCC = 10 V, IF = 5 mA, RL = 100 2 NOTES: 1. These parameters are measured between all phototransistor leads shorted together and with both input diode leads shorted together. 2. Parameters apply to all four channels. SELECTION GUIDE PART NUMBER PART DESCRIPTION 66296-001 Commercial 66296-101 Commercial with Group A 66296-103 Screened to TX Level 66296-105 Screened to TXV Level 66296-301 Screened to Space Level Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible.