DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION  725 E.Walnut St., Garland, TX 75040  (972)272-3571  Fax (972)487-6918 www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM

6 PIN GULL WING

66266 PROTON RADIATION TOLERANT OPTOCOUPLER

Features:  High Reliability  Base lead provided for conventional transistor biasing  Rugged package  Stability over wide temperature  +1000 V electrical isolation Applications:  Eliminate ground loops  Level shifting  Line receiver  Switching power supplies  Motor control

DESCRIPTION

The 66266 is a single channel device electrically similar to the 4N49. This product has been designed to be more tolerant to proton radiation and uses an 850 nm LED for higher CTR and greater durability. The 66266 optocoupler is packaged in a hermetically sealed 6 pin gull wing package. This device can be supplied to customer specifications as well as tested and screened to the requirements of MIL-PRF-19500 up to space (JANS) level. ABSOLUTE MAXIMUM RATINGS Notes: 1. Derate linearly to 125°C free-air temperature at the rate of 0.50 mA/°C above 25°C. 2. Derate linearly to 125°C free-air temperature at the rate of 3 mW/°C above 25C. Package Dimensions Schematic Dia gram ALL DIMENSIONS ARE IN INCHES UNLESS OTHERWISE NOTED. ALL TOLERANCES ARE ±0.005 UNLESS OTHERWISE NOTED. 0.130 26° NOM. 0.350±0.010PIN 1 4X 0.050 0.008 MAX. 0.046±0.010 0.025 0.010 A - ANODE B - BASE C - COLLECTOR E - EMITTER K - CATHODE A 3 4 C 5 B 6X 0.015±0.0020.195 K 1 6 E Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible.

MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION  725 E.Walnut St., Garland, TX 75040  (972)272-3571  Fax (972)487-6918 www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM 66266 6 PIN GULL WING PROTON RADIATION TOLERANT OPTOCOUPLER WITH 850 nm LED 05/31/2013

ELECTRICAL CHARACTERISTICS

TA = 25C unless otherwise specified. PARAMETER SYMBOL MIN TYP MAX UNITS TEST CONDITIONS NOTE Input Diode Static Reverse Current I R 1 µA V R = 3 V Input Diode Static Forward Voltage -55C V F 0.8 1.7 V I F = 10 mA Input Diode Static Forward Voltage +25C V F 0.8 1.35 1.7 V I F = 10 mA Input Diode Static Forward Voltage +100C V F 0.8 1.7 V I F = 10 mA OUTPUT TRANSISTOR TA = 25C unless otherwise specified. PARAMETER SYMBOL MIN TYP MAX UNITS TEST CONDITIONS NOTE Collector-Base Breakdown Voltage V (BR)CBO 45 V I C = 100 A, IB = 0, IF = 0 Collector-Emitter Breakdown Voltage V (BR)CEO 40 V I C = 1 mA, IB = 0, IF = 0 Emitter-Collector Breakdown Voltage V (BR)ECO 5 V I C = 0 mA, IE = 100 A, IF = 0 Off-State Collector Current +100C ICEO 100 100 nA VCE = 20 V, IF = 0 mA, IB = 0 VCE = 20 V, IF = 0 mA, IB = 0 COUPLED CHARACTERISTICS TA = 25C unless otherwise specified. PARAMETER SYMBOL MIN TYP MAX UNITS TEST CONDITIONS NOTE On State Collector Current I C(ON) 4.0 mA V CE = 5 V, IF = 1 mA, IB=0 On State Collector Current +100C I C(ON) 4.0 mA V CE = 5.0 V, IF = 2 mA, IB=0 On State Collector Current -55C I C(ON) 4.0 mA V CE = 5 V, IF = 2 mA, IB=0 Collector-Emitter Saturation Voltage V CE(SAT) 0.3 V I F = 2 mA, IC= 1 mA Input to Output Internal Resistance R IO 1011  V IN-OUT = 1000 V 1 Input to Output Capacitance C IO 2.5 5 pF f = 1MHz, V IN-OUT = 1000 V 1 Rise Time-Phototransistor Operation t r 5 10 s VCC = 10 V, IF = 10 mA, RL = 100 , IB = 0 Fall Time-Phototransistor Operation t f 5 10 s VCC = 10 V, IF = 10 mA, RL = 100 , IB = 0 NOTES: 1. These parameters are measured between all phototransistor leads shorted together and with both input diode leads shorted together. 2. This parameter must be measured using pulse techniques (t W = 100 s duty cycle  1%). RECOMMENDED OPERATING CONDITIONS: PARAMETER SYMBOL MIN MAX UNITS Input Current, Low Level I FL 0 90 A Input Current, High Level I FH 2 10 mA Supply Voltage V CE 5 25 V Operating Temperature T A -55 125 C SELECTION GUIDE PART NUMBER PART DESCRIPTION 66266-001 Commercial 66266-101 Commercial with Group A 66266-103 Screened to TX Level 66266-105 Screened to TXV Level 66266-300 Screened to Space Level 66266-303 Screened to Space Level with 96 hours HTRB and 125°C steady state life test Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible.