DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION 725 E.Walnut St., Garland, TX 75040 (972)272-3571 Fax (972)487-6918 www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM 66260 6 PIN GULL WING PROTON RADIATION TOLERANT OPTOCOUPLER OPTOELECTRONIC PRODUCTS DIVISION 05/31/2013 Features: High Reliability Base lead provided for conventional transistor biasing Rugged package Stability over wide temperature +1000 V electrical isolation Applications: Eliminate ground loops Level shifting Line receiver Switching power supplies Motor control
DESCRIPTION
The 66260 is a single channel device electrically similar to the 4N48. This product has been designed to be more tolerant to proton radiation. The 66260 optocoupler is packaged in a hermetically sealed 6 pin gull wing package. This device can be supplied to customer specifications as well as tested and screened to the requirements of MIL-PRF-19500 up to space (JANS) level. ABSOLUTE MAXIMUM RATINGS Notes: 1. Derate linearly to 100°C free-air temperature at the rate of 0.67 mA/°C above 25°C. 2. Derate linearly to 100°C free-air temperature at the rate of 4 mW/°C above 25C. Package Dimensions Schematic Di agram 0.350±0.010 0.195 6X 0.015±0.002 4X 0.050 0.010 0.008 MAX.0.025 26° NOM. 0.046±0.010 0.130 ALL DIMENSIONS ARE IN INCHES UNLESS OTHERWISE NOTED. ALL TOLERANCES ARE ±0.005 UNLESS OTHERWISE NOTED.
5 BK 3
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible.
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION 725 E.Walnut St., Garland, TX 75040 (972)272-3571 Fax (972)487-6918 www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM 66260 6 PIN GULL WING PROTON RADIATION TOLERANT OPTOCOUPLER 05/31/2013
ELECTRICAL CHARACTERISTICS
TA = 25C unless otherwise specified. PARAMETER SYMBOL MIN TYP MAX UNITS TEST CONDITIONS NOTE Input Diode Static Reverse Current I R 100 µA V R = 3 V Input Diode Static Forward Voltage -55C V F 1.0 2.2 V I F = 10 mA Input Diode Static Forward Voltage +25C V F 0.8 1.8 2.0 V I F = 10 mA Input Diode Static Forward Voltage +100C V F 0.8 2.2 V I F = 10 mA OUTPUT TRANSISTOR TA = 25C unless otherwise specified. PARAMETER SYMBOL MIN TYP MAX UNITS TEST CONDITIONS NOTE Collector-Base Breakdown Voltage V (BR)CBO 45 V I C = 100 A, IB = 0, IF = 0 Collector-Emitter Breakdown Voltage V (BR)CEO 40 V I C = 1mA, IB = 0, IF = 0 Off-State Collector Current +100C ICEO 100 100 nA VCE = 20 V, IF = 0 mA, IB = 0 VCE = 20 V, IF = 0 mA, IB = 0 COUPLED CHARACTERISTICS TA = 25C unless otherwise specified. PARAMETER SYMBOL MIN TYP MAX UNITS TEST CONDITIONS NOTE On State Collector Current I C(ON) 1.0 mA V CE = 5 V, IF = 1mA, IB = 0 On State Collector Current +100C I C(ON) 1.0 mA V CE = 5.0 V, IF = 2 mA, IB = 0 On State Collector Current -55C I C(ON) 1.0 mA V CE = 5 V, IF = 2 mA, IB = 0 Collector-Emitter Saturation Voltage V CE(SAT) 0.3 V I F = 2 mA, IC= 1 mA Input to Output Internal Resistance R IO 1011 V IN-OUT = 1000 V 1 Input to Output Capacitance C IO 2.5 5 pF f = 1MHz, V IN-OUT = 1000 V 1 Rise Time-Phototransistor Operation t r 5 10 s VCC = 10 V, IF = 10 mA, RL = 100 , IB = 0 Fall Time-Phototransistor Operation t f 5 10 s VCC = 10 V, IF = 10 mA, RL = 100 , IB = 0 NOTES: 1. These parameters are measured between all phototransistor leads shorted together and with both input diode leads shorted together. This parameter must be measured using pulse techniques (tW = 100 s duty cycle 1%). RECOMMENDED OPERATING CONDITIONS: PARAMETER SYMBOL MIN MAX UNITS Input Current, Low Level I FL 0 90 A Input Current, High Level I FH 1 10 mA Supply Voltage V CE 5 10 V Operating Temperature T A -55 100 C SELECTION GUIDE PART NUMBER PART DESCRIPTION 66260-001 Commercial 66260-101 Screened to JAN Level 66260-103 Screened to JANTX Level 66260-105 Screened to JANTXV Level 66260-300 Screened to JANS Level Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible.