66143 MICROPAC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION •••• 725 E.Walnut St., Garland, TX 75040 •••• (972)272-3571 •••• Fax (972)487-6918 www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM

66143 QUAD CHANNEL, HERMETIC 20 PIN LCC,

OPTICALLY COUPLED ISOLATOR OPTOELECTRONIC PRODUCTS DIVISION 08/06/2008 Features:

  • High Reliability
  • Base lead provided for conventional transistor biasing
  • Very high gain, high voltage transistor
  • Stability over wide temperature range.
  • +1kVdc electrical isolation
  • Screening available Applications:
  • Eliminate ground loops
  • Level shifting
  • Line receiver
  • Switching power supplies
  • Motor control

DESCRIPTION

The Mii 66143 -X02, -X03 and -X04 are optically coupled isolators, consisting of four GaAlAs LEDs and four silicon phototransistors mounted and coupled in a miniature surface mount hermetic leadless chip carrier. All electrical characteristics of each channel are identical to the JEDEC registered 4N47 (-X02), 4N48 (-X03) and 4N49 (-X04). Each unit contains four channels. These solid state couplers are ideal for designs where board space and device weight are important design considerations. ABSOLUTE MAXIMUM RATINGS Notes: 1. Measured with Inputs shorted together and outputs shorted together. 2. Derate linearly to 125°C free-air temperature at the rate of 0.67 mA/°C above 65°C. 3. Derate linearly to 125°C free-air temperature at the rate of 3 mW/°C. Package Dimensions Schematic Diagram 7K2 K4 189 B2 10 E2 B14

11 C2 17

6 C1 13

0.050 [1.27] TYP. 0.090 [2.29] ±0.009 [0.23] PIN 1 ALL DIMENSIONS ARE IN INCHES [MILLIMETERS] 0.350 [8.89] SQ. ±0.008 [0.20] 66143 XXXX 0.050 TYP R0.008 [R0.20] TYP. PIN 1 0.085 [2.16] TYP. PIN 16

MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION •••• 725 E.Walnut St., Garland, TX 75040 •••• (972)272-3571 •••• Fax (972)487-6918 www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM

66143 QUAD CHANNEL, HERMETIC 20 PIN LCC, OPTICALLY COUPLED ISOLATOR

ELECTRICAL CHARACTERISTICS

TA = 25°C unless otherwise specified. PARAMETER SYMBOL MIN TYP MAX UNITS TEST CONDITIONS NOTE Input Diode Static Reverse Current IR 100 µA V R = 3V 1 Input Diode Forward Voltage -55 °C +25°C +100°C VF 1.0 0.8 0.7 1.7 1.5 1.3 V I F = 10mA OUTPUT TRANSISTOR TA = 25°C unless otherwise specified. Collector-Base Breakdown Voltage V (BR)CBO 45 V I C = 100µA, IB = 0, IF = 0 Collector-Emitter Breakdown Voltage V(BR)CEO 40 V I C = 1mA, IB = 0, IF = 0 Emitter-Base Breakdown Voltage V(BR)EBO 7 V I C = 0mA, IE = 100µA, IF = 0 COUPLED CHARACTERISTICS TA = 25°C unless otherwise specified. On State Collector Current -X02 Ta = +25°C -X03 -X04 IC(ON) 0.5 1.0 2.0 mA V CE = 5V, IB = 0, IF = 1mA On State Collector Current -X02 Ta = -55°C -X03 -X04 IC(ON) 0.7 1.4 2.8 mA V CE = 5V, IB = 0, IF = 2mA On State Collector Current -X02 Ta = +100°C -X03 -X04 IC(ON) 0.5 1.0 2.0 mA V CE = 5V, IB = 0, IF = 2mA On-State Collector Base Current I CB(ON) 30 µA V CB = 5V, IE = 0, IF = 10mA Off State Collector Current I C(OFF) 100 nA V CE = 20V, IB = 0, IF = 0mA 1 Off State Collector Current, Ta = +100°C IC(OFF) 100 µA V CE = 20V, IB = 0, IF = 0mA 1 Collector-Base Dark Current I CB(OFF) 10 nA V CB = 20V, IE = 0, IF = 0 Collector-Emitter Saturation Voltage -X02 -X03 -X04 VCE(SAT) 0.3 0.3 0.3 V I F = 2mA, IC = 0.5mA, IB = 0 IF = 2mA, IC = 1mA, IB = 0 IF = 2mA, IC = 2mA, IB = 0 Input to Output Resistance R IO 1011 Ω VIN-OUT = 1kV, tw = 100µs, duty cycle < 1% 2 Input to Output Capacitance C IO 5 pF F = 1MHz, V IN-OUT = 0 Rise Time (Phototransistor Operation) -X02 or -X03 Fall Time -X04 t r or tf µs VCC = 10V, IF = 5mA, RL = 100Ω , IB = 0 Rise Time (Photodiode Operation) -X02 or -X03 Fall Time -X04 t r or tf 0.85 0.85 0.85 µs VCC = 10V, IF = 5mA, RL = 100Ω , IE = 0 1 NOTES: 1. Parameter applies to all four channels. 2. These parameters are measured between all phototransistor leads shorted together and with both input diode leads shorted together. RECOMMENDED OPERATING CONDITIONS: PARAMETER. SYMBOL MIN MAX UNITS Input Current, Low Level I FL 0 100 µA Input Current, High Level I FH 1 10 mA Supply Voltage V CC 5.0 20 V SELECTION GUIDE PART NUMBER PART DESCRIPTION 66143-002 4N47 Commercial 66143-003 4N48 Commercial 66143-004 4N49 Commercial 66143-102 4N47 Screened 66143-103 4N48 Screened 66143-104 4N49 Screened