66116 MICROPAC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918 www.micropac.com E-MAIL: optosales@micropac.com 3 - 12 Single Channel Optocoupler

66116 Electrically Similar to 4N47-4N49

Coaxial or Bulkhead Mount packages Mii OPTOELECTRONIC PRODUCTS DIVISION Features:

  • High reliability
  • Base lead provided for conventional transistor biasing
  • Very high gain, high voltage transistor
  • Hermetically sealed for reliability and stability
  • Stability over wide temperature range
  • High voltage electrical isolation Applications:
  • Line Receivers
  • Switchmode Power Supplies
  • Signal ground isolation
  • Process Control input/output isolation

DESCRIPTION

Very high gain optocoupler utilizing GaAIAs infrared LED optically coupled to an N-P-N silicon phototransistor packaged in a hermetically sealed metal case. These devices can be tested to customer specifications, as well as to MIL-PRF-38534 H&K quality levels. *ABSOLUTE MAXIMUM RATINGS * JEDEC registered data Package Dimensions Schematic Diagram Case LeadEmitter Base ANODE CATHODE Collector Case Lead E BK CA Notes: 1. This value applies with the emitter-base diode open-circuited and the input-diode current equal to zero. 2. Derate linearly to 125°C free-air temperature at the rate of 0.67 mA/°C. 3. This value applies for t w≤1us. PRR<300 pps. 4. Derate linearly to 125°C free-air temperature at the rate of 3 mW/°C.

MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918 www.micropac.com E-MAIL: optosales@micropac.com 3 - 13

66116 Single Channel Optocoupler

ELECTRICAL CHARACTERISTICS TA = 25°C Unless otherwise specified PARAMETER SYMBOL MIN TYP MAX UNI TS TEST CONDITIONS NOTE Input Diode Static Reverse Current I R 100 µA V R = 2V Input Diode Static Forward Voltage -55 °C +25 °C +100 °C VF 0.8 0.7 1.4 1.7 1.5 1.3 VI E = 10mA OUTPUT TRANSISTOR TA = 25°C Unless otherwise specified PARAMETER SYMBOL MIN TYP MAX UNI TS TEST CONDITIONS NOTE Collector-Base Breakdown Voltage V (BR)CBO 45 V I C = 100µA, IB = 0, IF = 0 Collector-Emitter Breakdown Voltage V (BR)CEO 40 V I C = 1mA, IB = 0, IF = 0 Emitter-Collector Breakdown Voltage V (BR)ECO 7V I C = 0, IE = 100µA, IF = 0 COUPLED CHARACTERISTICS TA = 25°C Unless otherwise specified PARAMETER SYMBOL MIN TYP MAX UNI TS TEST CONDITIONS NOTE On State Collector Current -XX1 -XX2 -XX3 I C(ON) 0.5 mA V CE = 5V, IB = 0, IF = 1mA On State Collector Current -55 °C I C(ON) 0.7 1.4 2.8 mA V CE = 5V, IB = 0, IF = 2mA On State Collector Current -XX1 +100 °C -XX2 -XX3 IC(ON) 0.5 mA V CE = 5V, IB = 0, IF = 2mA 2 Off State Collector Current +25°CI C(OFF) 100 nA V CE = 20V, IB = 0, IF = 0mA Off State Collector Current +100°C I C(OFF) 100 µAV CE = 20V, IB = 0, IF = 0mA Collector-Emitter Saturation Voltage -XX1 -XX2 -XX3 V CE(SAT) VCE(SAT) VCE(SAT) 0.3 0.3 0.3 V V V I C = 0.5mA, IB = 0, IF = 2mA IC = 1mA, IB = 0, IF = 2mA IC = 2mA, IB = 0, IF = 2mA Input to Output Resistance R I-O 1011 VIN-OUT = 1kV 1 Input to Output Capacitance C I-O 5 pF f = 1MHz, V IN-OUT = 1kV 1 Rise Time/ Fall Time -XX1 Phototransistor Operation -XX2 -XX3 t r / tf tr / tf tr / tf µs µs µs VCC = 10V, IF = 5mA, RL = 100Ω Rise Time/ Fall Time -XX1 Photodiode Operation -XX2 -XX3 t r / tf tr / tf tr / tf 0.85 0.85 0.85 µs µs µs VCC = 10V, IF = 5mA, RL = 100Ω NOTES: 1. These parameters are measured between all phototransistor leads shorted together and with both input diode leads shorted together. 2. This parameter measured using pulse techniques t w =100µs, duty cycle < 1%. RECOMMENDED OPERATING CONDITIONS: PARAMETER SYMBOL MIN MAX UNITS Input Current, Low Level I FL 01 0 0 µA Input Current, High Level I FH 21 0m A Supply Voltage V CE 51 0 V SELECTION GUIDE PART NUMBER PART DESCRIPTION 66116-001 Single Channel, Commercial (0 to 70ºC) Coaxial Packaging 66116-002 Single Channel, Commercial (0 to 70ºC) Coaxial Packaging 66116-003 Single Channel, Commercial (0 to 70ºC) Coaxial Packaging 66116-001B Single Channel, Commercial (0 to 70ºC) Bulkhead Packaging 66116-002B Single Channel, Commercial (0 to 70ºC) Bulkhead Packaging 66116-003B Single Channel, Commercial (0 to 70ºC) Bulkhead Packaging 66116-101 Single Channel, 100% screened, (-55 to +125ºC) Coaxial Packaging 66116-102 Single Channel, 100% screened, (-55 to +125ºC) Coaxial Packaging 66116-103 Single Channel, 100% screened, (-55 to +125ºC) Coaxial Packaging 66116-101B Single Channel, 100% screened, (-55 to +125ºC) Bulkhead Packaging 66116-102B Single Channel, 100% screened, (-55 to +125ºC) Bulkhead Packaging 66116-103B Single Channel, 100% screened, (-55 to +125ºC) Bulkhead Packaging 66116-201 Single Channel, full mil-temp, (-55 to +125ºC) Coaxial Packaging 66116-202 Single Channel, full mil-temp, (-55 to +125ºC) Coaxial Packaging 66116-203 Single Channel, full mil-temp, (-55 to +125ºC) Coaxial Packaging 66116-201B Single Channel, full mil-temp, (-55 to +125ºC) Bulkhead Packaging 66116-202B Single Channel, full mil-temp, (-55 to +125ºC) Bulkhead Packaging 66116-203B Single Channel, full mil-temp, (-55 to +125ºC) Bulkhead Packaging