66056 MICROPAC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St.., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918 www.micropac.com E-MAIL: optosales@micropac.com 3 - 34

66056 SINGLE/DUAL CHANNEL, HERMETICALLY SEALED,

VERY HIGH SPEED OPTOCOUPLER Mii OPTOELECTRONIC PRODUCTS DIVISION Rev 1 7/3/01 Features:

  • DSCC Approved 8102802PX (Dual); and single channel version optocoupler
  • 10 MHz bandwidth typical
  • 1500 Vdc isolation test voltage
  • TTL compatible input and output
  • High radiation immunity
  • Faraday shield to provide high common mode rejection Applications:
  • Military and space
  • Voltage level shifting
  • Isolated receiver input
  • Communication systems
  • Medical systems

DESCRIPTION

The 66056 single and dual channel optocouplers consist of LED’s optically coupled to two high speed, high gain inverting detector gates. Maximum isolation can be achieved while providing TTL outputs capable of switching with propagation delays of 55ns typical. The 66056 is available in military temperat ure range and military temperature with 100% device screening. The devices are built in eight-pin dual-in-line, hermetically sealed packages and provide high input to output DC isolation. ABSOLUTE MAXIMUM RATINGS NOTES: 1. Derate I F at 0.05mA/°C above 25°C. Package Dimensions Schematic Diagrams ALL D IM E N SIO N S AR E IN IN C H ES [M ILLIM ETER S] NOTE: SIDE VIEWREAR VIEW 24 31 YYWW XXXX USA END VI EW 68 75 0.170 [4.32]MAX PI N ONE TYPE NUMBER 0.370 [9.040] 0.390 [9.90] 0.320 [8.13]MAX DATE CODE 0.280 [7.11] 0.310 [7.88] PI N ONE 0.020 [0.51] M IN 0.007 [0.18] 0.013 [0.33] 0.090 [2.28] 0.110 [2.80] .020 [0.51] M AX K 6 A 1 K A 8 GND 5 Vo2 6 7Vo1 Vcc K 5GND 2 A 6Vo 8Vcc Si ngl e Channel Dual Channel NOTE: A .01 to .1 uF bypass capacitor must be placed between Vcc and Gnd

MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St.., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918 www.micropac.com E-MAIL: optosales@micropac.com 3 - 35

66056 SINGLE/DUAL CHANNEL, HERMETICALLY SEALED, VERY HIGH SPEED OPTOCOUPLER

ELECTRICAL CHARACTERISTICS Ta=-55°C to at 125°C unless otherwise specified. PARAMETER SYMBOL MIN TYP MAX UNI TS TEST CONDITIONS NOTE High Level Output Current I OH 52 5 0 µ A V CC = 5.5V, VO = 5.5V,IF =250µA 1 Low Level Output Voltage V OL 0.5 0.6 V V CC = 5.5V, IF = 10mA IOL (Sinking) = 10mA 1,3 High Level Supply Current Single Channel Dual Channel ICCH 9 mA V CC = 5.5V, IF = 0 (Both Channels) Low Level Supply Current Single Channel Dual Channel I CCL 13 mA V CC = 5.5V, IF = 20mA (Both Channels) Input Forward Voltage V F 1.5 1.75 V I F = 20mA 1 Input Reverse Breakdown Voltage BV R 5V I R = 10µA Input-Output Insulation Leakage Current I I—O 1.0 µA V I—0 = 1500Vdc, Relative Humidity = 45% ta = 25°C, t = 5s Propagation Delay Time To High Output Level t PLH 45 100 ns R L = 510Ω, CL = 50pF. If = 13mA, ta = 25°C 3,4 Propagation Delay Time To Low Output Level t PHL 55 100 ns R L = 510Ω, CL = 50pF If = 13mA, ta = 25°C 3,5 TYPICAL CHARACTERISTICS TA = 25°C, VCC = 5V EACH CHANNEL PARAMETER SYMBOL MIN TYP MAX UN ITS TEST CONDITIONS NOTE Input Capacitance C IN 60 pF V F = 0, f = MHz 1 Input Diode Temperature Coefficient ∆vF ∆TA -1.9 mV/ °CI F = 20mA 1 Resistance (Input-Output) R I-0 1012 Ω VI—O = 500V 2 Capacitance (Input-Output) C I-O 5 pF f = 1MHz 2 Output Rise-Fall Time (10-90%) t r, tf 35 ns R L = 510Ω, CL = 50pFIF = 13mA Common Mode Transient Immunity at High Output Level CMH 1000 10000 V/ µsV CM = 10V (peak), VO (min) = 2V, RL = 510Ω, IF = OmA Common Mode Transient Immunity at Low Output Level CML 1000 10000 V/ µsV CM = 10V (peak), VO (max) = 0.8V, RL = 510Ω, IF = 1OmA NOTES: 1. Each channel 2. Measured between input pins shorted together and output pins shorted together. 3. It is essential that a bypass capacitor (.01 to 0.1 µF ceramic) be connected from pin 1 to pin 4. 4. The t plh propagation delay is measured from the 6.5mA point on the trailing edge of the input pulse to the 1.5V point on the trailing edge of the output pulse. 5. The t phl propagation delay is measured from the 6.5mA point on the leading edge of the input pulse to the 1.5V point on the leading edge of the output pulse. RECOMMENDED OPERATING CONDITIONS: PARAMETER SYMBOL MIN MAX UNITS Input Current, Low Level Each Channel I FL 02 5 0 µA Input Current, High Level Each Channel I FH 12.5 20 mA Supply Voltage V C 4.5 5.5 V Fan Out (TTL Load) Each Channel N 6 Operating Temperature T A -55 125 °C SELECTION GUIDE PART NUMBER PART DESCRIPTION 66056-011 Single Channel, commercial optocoupler 66056-012 Dual Channel, commercial optocoupler 66056-001 Single Channel, Mil-temp optocoupler tested over full military temperature range (-55° to +125°C) 66056-002 Dual Channel, Mil-temp optocoupler tested over full military temperature range (-55° to +125°C) 66056-101 Single Channel optocoupler tested over full military temperature range with 100% device screening 66056-102 Dual Channel optocoupler tested over full military temperature range with 100% device screening 66056-103 DSCC Dwg 8102802PX Dual channel optocoupler