66013 MICROPAC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918 www.micropac.com E-MAIL: optosales@micropac.com 3 - 22

66013 DUAL CHANNEL, HERMETICALLY SEALED, HIGH-SPEED

Features:

  • DSCC Approved 8102801EX
  • 5 MHz bandwidth typical
  • 1500 Vdc isolation test voltage
  • TTL compatible input and output
  • High radiation immunity
  • Faraday shield to provide high common mode rejection Applications:
  • Military and space
  • High reliability systems
  • Voltage level shifting
  • Isolated receiver input
  • Communication systems
  • Medical systems

DESCRIPTION

The 66013 dual channel optocoupler consists of two LED’s optically coupled to two high speed, high gain inverting detector gates. Maximum isolation can be achieved while providing TTL outputs capable of switching with propagation delays of 55ns typical. The 66013 is a 16 pin dual-in-line, hermetically sealed package and is available in standard and MIL-PRF-38534 screened versions or tested to customer specifications. ABSOLUTE MAXIMUM RATINGS Package Dimensions Schematic Diagram PIN 1 GND .800±.020 [20.32] 0.120 [3.05] 0.175 [4.45] ALL DIMENSIONS ARE IN INCHES [MILLIMETERS] 0.290 [7.37] 0.301 [7.65] 0.011 [0.28] K A A K Vo1 Vcc Vo2 12

MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918 www.micropac.com E-MAIL: optosales@micropac.com 3 - 23

66013 DUAL CHANNEL, HERMETICALLY SEALED, HIGH SPEED 6N134 OPTOCOUPLER

ELECTRICAL CHARACTERISTICS Ta=-55°C TO AT 125°C UNLESS OTHERWISE SPECIFIED. PARAMETER SYMBOL MIN TYP MAX UNI TS TEST CONDITIONS NOTE High Level Output Current I OH 52 5 0 µ A V CC = 5.5V, VO = 5.5V, IF = 250µA Low Level Output Voltage V OL 0.35 0.6 V V CC = 5.5V IF = 10mA IOL(Sinking) = 10mA 1,9 High Level Supply Current (Both Channels) ICCH 18 28 mA VCC = 5.5V, IF = 0 Low Level Supply Current (Both Channels) ICCL 26 36 mA VCC = 5.5V, IF = 20mA Input Forward Voltage VF 1.5 1.75 V IF = 20mA 1 Input Reverse Breakdown Voltage BVR 5V IR = 10µA Input-Output Insulation Leakage Current II—O 1.0 µA V I—0 = 1500Vdc, Relative Humidity = 45% ta = 25°C, t = 5s Propagation Delay Time To High Output Level t PLH 45 100 ns R L = 510Ω, CL = 50pF If = 13mA, Ta = 25°C Propagation Delay Time To Low Output Level t PHL 55 100 ns R L = 510Ω, CL = 50pF If = 13mA, Ta = 25°C Delay Time To Low to High Output Level (90%) t LH 90 ns R L = 510Ω, CL = 50pF IF = 13mA, Ta = 25°C Delay Time To High to Low Output Level (90%) t HL 40 ns R L = 510Ω, CL = 50pF If = 13mA, Ta = 25°C TYPICAL CHARACTERISTICS TA = 25°C, VCC = 5V EACH CHANNEL PARAMETER SYMBOL MIN TYP MAX UNITS TEST CONDITIONS NOTE Input Capacitance CIN 60 pF VF = 0, f = MHz 1 Input Diode Temperature Coefficient ∆vF∆TA -1.9 mV/°C IF = 20mA 1 Resistance (Input-Output) RI-0 1012 Ω VI—O = 500V 3 Capacitance (Input-Output) CI-O 1.7 pF f = 1MHz 3 Input-Input Insulation Leakage Current II-I 0.5 nA Relative Humidity = 45% VI-I = 500V, t = 5s Resistance (Input-Input) RI-I 1012 Ω VI-I = 500V 4 Capacitance (Input-Input) CI-I 0.80 pF f = 1MHz 4 Output Rise-Fall Time (10-90%) tf, tf 35 90 ns RL = 510Ω, CL = 50pF IF = 13mA Common Mode Transient Immunity at High Output Level CMH 1000 10000 V/ µsV CM = 10V (peak), VO (min) = 2V, RL = 510Ω, IF = OmA Common Mode Transient Immunity at Low Output Level CML 1000 10000 V/ µsV CM = 10V (peak), VO (max) = 0.8V, RL = 510Ω, IF = 10mA NOTES: 1. Each channel 2. Measured between pins 1 through 8 shorted together and pins 9 through 16 shorted together. 3. Measured between pins 9 and 10 or 11 and 12 shorted together, and pins 9 through 16 shorted together. 4. Measured between pins 9 and 10 shorted together, and pins 11 and 12 shorted together. 5. The t plh propagation delay is measured from the 6.5mA point on the trailing edge of the input pulse to the 1.5V point on the trailing edge of the output pulse. 6. The t phl propagation delay is measured from the 6.5mA point on the leading edge of the input pulse to the 1.5V point on the leading edge of the output pulse. 9. It is essential that a bypass capacitor (.01 to 0.1 µF ceramic) be connected from pin 10 to pin 15. RECOMMENDED OPERATING CONDITIONS: PARAMETER SYMBOL MIN MAX UNITS Input Current, Low Level Each Channel I FL 02 5 0 µA Input Current, High Level Each Channel I FH 12.5 20 mA Supply Voltage V C 4.5 5.5 V SELECTION GUIDE PART NUMBER PART DESCRIPTION 66013-000 Dual Channel Optocoupler with 100% device screening 66013-001 DSCC Dwg 8102801EX Dual Channel Optocoupler 66013-002 Dual Channel Optocoupler, Commercial, tested over full military temperature range (-55°C to +125°C) 66013-003 Dual Channel Optocoupler, Commercial (0° to 70°C)