652 MARL | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
high performance panel lamps
features
Typical characteristics (T a = 25°C) BS EN ISO 9001:2008 approved manufacturer 652 series
- Ø12.7mm mounting
- Product will operate over a wide voltage range
- Black anodised aluminium housing
- Colour diffused lens with an 180º viewing angle
- Fully internally potted to resist shock and vibration
- Sealed to IP67
- True bi-polar product; AC and DC operation
- Pack Quantity = 10 Pieces Part Number Colour Voltage Vac/dc Current DC (mA) Luminous Intensity (mcd) Wave Length (nm) Operating Temp. (°C) Storage Temp. (°C) De-rating Graphs 652-105-75 Red 110 Vac 6 95 625 -40 - +85 -40 - +85 B 652-102-75 Red 110 Vac 6 500 660 -40 - +85 -40 - +85 B 652-111-75 Yellow 110 Vac 6 45 590 -40 - +85 -40 - +85 B 652-114-75 Green 110 Vac 6 45 565 -40 - +85 -40 - +85 C - Products must be de-rated according to the de-rating information. Each de-rating graph refers to specific LEDs. Please refer to graphs on page 3. - Luminous intensity is measured at 20mA on a discrete LED unless otherwise stated. to order please contact us on: t: +44 (0)1229 582 430 © marl international limited technical documentation has been designed by marl international limited for the intention of providing information, which must not be copied or released to a third party without prior written consent from marl international limited. the information provided does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. no responsibility can be assumed for inaccuracies or printing errors. marl international limited reserve the right to alter without notice the specification or any conditions of supply for product or service. marl international limited - dsn 652 - version 2012-12-06-113944 page 1 of 4
Dimensions in mm (typical) Not to scale technical characteristics SeriesMax. Power Dissipation Max. Reverse VoltagePanel CutoutNut Mounting Torque Min. Mounting Centres Max. Panel Thickness units mW Vdc mm Nm mm mm to order Mounting hole to be clean and burr free * = Current Version ^ = Voltage Version BS EN ISO 9001:2008 approved manufacturer 652 series 11.3 0.1 12.7 0.1 2.8 8.5 23 5 28 8.5 12.7 0.1 Mounting Hole Below 50Vac/dc Above 50Vac/dc Mounting Hole Anode termination denoted by red indicator housing material Body Nut Panel Seal Fresnel Lens Encapsulation Lock Washer push on connectors HeaderHeader Header Termination 925-000-00 is brass tin plated - for use with 652 series lamp Dimensions in mm (typical). Not to scale. Aluminium Grade 6063 balck anodised Stainless Steel Grade 303 Viton Polycarbonate PC5430 Resin Zinc Plated Steel Copper with silver flash finish Nylon6 A82 optional flying lead terminations O rder Code Suffix Supply Voltage Wire Colour Wire Length No/Diameter of Conductor Diameter InsulationComments
19 DC productsRed-anode/ Black-cathode1000mm
- - to order please contact us on: t: +44 (0)1229 582 430 f: +44 (0)1229 585 155 © marl international limited technical documentation has been designed by marl international limited for the intention of providing information, which must not be copied or released to a third party without prior written consent from marl international limited. the information provided does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. no responsibility can be assumed for inaccuracies or printing errors. marl international limited reserve the right to alter without notice the specification or any conditions of supply for product or service. marl international limited - dsn 652 - version 2012-12-06-113944 page 2 of 4
BS EN ISO 9001:2008 approved manufacturer 652 series Ambient Temperature Ta (°C) Forward Current IF (mA) Derating Graph B 2030 Ambient Temperature Ta (°C) Forward Current IF (mA) Derating Graph C 2030 also available Part numbers also available in the 652 series: Part Number Colour Voltage Vopr 652-102-63 Red 12-28Vac/dc 652-105-63 Red 12-28Vac/dc 652-111-63 Yellow 12-28Vac/dc 652-114-63 Green 12-28Vac/dc The products listed here illustrate all of the options available to order. These products may have custom modifications that alter their operation beyond the generic information contained within this datasheet. Please contact sales for further information. * = These products do not contain integral resistors to order please contact us on: t: +44 (0)1229 582 430 f: +44 (0)1229 585 155 © marl international limited technical documentation has been designed by marl international limited for the intention of providing information, which must not be copied or released to a third party without prior written consent from marl international limited. the information provided does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. no responsibility can be assumed for inaccuracies or printing errors. marl international limited reserve the right to alter without notice the specification or any conditions of supply for product or service. marl international limited - dsn 652 - version 2012-12-06-113944 page 3 of 4
Electro-Static Discharge (ESD) Build up of electro-static discharge occurs in many situations involving people moving and handling products. The range of possible situations is very diverse but voltage levels as high as several thousand volts can and do arise in many individual situations. When an operator charged up to these levels handles a static sensitive device, there is a very probable likelihood that the device will be irreversibly damaged. It is essential that precautions are taken at all stages during manufacture and assembly of these products. Although LEDs were never considered to be static sensitive devices, changes in manufacturing technology and materials used to produce higher intensity products over a large range of the wavelength spectrum have changed this. Marl has an approved system of ESD control from goods in, through production and into final packing and despatch. Marl recommend all users of LED based products follow the guidelines of BS 100015. Power De-Rating The forward voltage/ current value of an LED is dependant upon the ambient temperature of the environment in which it is operated. Therefore, care must be taken to operate the LED at the correct voltage/ current values, depending upon the ambient temperature. Consequently, a recommendation regarding operating voltages and currents is given in order to address these temperature effects. This recommendation is termed ‘de-rating’. It is usual for forward voltages and currents to be specified for ambient temperature of 25°C. However, because the values of these qualities vary with temperature, please refer to the de-rating graphs for correct operation. Marl accept no liability for any product that is operated higher than the stated voltage. BS EN ISO 9001:2008 approved manufacturer 652 series to order please contact us on: t: +44 (0)1229 582 430 f: +44 (0)1229 585 155 © marl international limited technical documentation has been designed by marl international limited for the intention of providing information, which must not be copied or released to a third party without prior written consent from marl international limited. the information provided does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. no responsibility can be assumed for inaccuracies or printing errors. marl international limited reserve the right to alter without notice the specification or any conditions of supply for product or service. marl international limited - dsn 652 - version 2012-12-06-113944 page 4 of 4