652-105-63 MARL | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
How to Order: Telephone +44 (0)1229 582430 Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a represent ation relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply for products or service. l Each product will operate over a wide volt age input range l Black anodised aluminium housing l 180° viewing angle l Full internal potting to resist shock and vibration l Sealed to IP67 l True Bi-polar product PROFESSIONAL LED INDICATORS Ø12.7mm Mounting SAMPLES AVAILABLE© MARL INTERNATIONAL LTD 2007 : DS 069/07 Issue 2 Ordering Information & Typical Technical Characteristics (Ta = 25°C) Mean Time Between Failure = 100,000 Hours. Luminous intensity figures refer to the unmodified discrete LED.
FEATURES
652 SERIES
PACK QUANTITY = 10 PIECES Page 1 of 2 ^ = Products must be derated according to the derating information. Each derating graph refers to specific LEDs. PART NUMBER COLOUR LENS VOLTAGE CURRENT LUMINOUS WAVE OPERATING STORAGE DC (Vdc) DC (mA) INTENSITY LENGTH TEMP TEMP Vopr lopr lv@20mA (mcd) lp (nm) Topr Tstg 652-105-63 Red Colour Diffused 12-28 6-16 100 627 -40 ~ +85^ -40 ~ +85 Yes 652-102-63 Red (GaAlAs) Colour Diffused 12-28 6-16 450 660 -40 ~ +85^ -40 ~ +85 Yes 652-111-63 Yellow Colour Diffused 12-28 6-16 50 590 -40 ~ +85^ -40 ~ +85 Yes 652-114-63 Green Colour Diffused 12-28 6-16 60 565 -40 ~ +85^ -40 ~ +85 Yes 652-105-75 Red Colour Diffused 110Vac 6 100 627 -40 ~ +85^ -40 ~ +85 Yes 652-102-75 Red (GaAlAs) Colour Diffused 110Vac 6 450 660 -40 ~ +85^ -40 ~ +85 Yes 652-111-75 Yellow Colour Diffused 110Vac 6 50 590 -40 ~ +85^ -40 ~ +85 Yes 652-114-75 Green Colour Diffused 110Vac 6 60 565 -40 ~ +85^ -40 ~ +85 Yes UNITS Vac/Vdc mA mcd nm °C °C HIGH INTENSITY 105,102,111 & 114
Mounting hole to be clean and burr free Dimensions in mm (Typical) Not to scale 20mA to 48Vac/dc Mounting Hole How to Order: Telephone +44 (0)1229 582430 Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a represent ation relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply for products or service. SAMPLES AVAILABLE© MARL INTERNATIONAL LTD 2007 : DS 069/07 Issue 2 Page 2 of 2 BS EN ISO 9001:2000 Approved Manufacturer TECHNICAL CHARACTERISTICS SERIES MAXIMUM PANEL NUT MINIMUM MIN/MAX. POWER CUTOUT MOUNTING MOUNTING PANEL DISSIPATION TORQUE CENTRES THICKNESS mW mm Nm mm mm MATERIALS PUSH-ON CONNECTORS Body Aluminium grade 6063 black anodised Nut Stainless Steel grade 303 Panel Seal Viton Termination Copper with silver flash finish Lock Washer Zinc plated steel Fresnel lens Polycarbonate Encapsulation PC5430 Header Nylon6 A82 925-000-00 is brass tin plated. For use with 652 series lamps. Dimensions in mm (Typical) Not to scale All other voltages