6510_V01 BURKERT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 6

Technical content

Type 6510/6511Multi-Way Valves for Pneumatics servo-assisted, extendable, 10 mm wide 3/2 and 5/2 way valves Flow rates: 130 l/min; M5 and Legris ø 4 mm Advantages / Benefits EEx-ia-II C T6 approval Optimal system solutions due to the high level of modularity Long service life even with non-lube conditions Pre-tested and supplied "easy to connect" No individual valve wiring Separate electrical circuits for the electronics and the valves. Field bus compatible Low installation costs Corrosion resistant

Applications

For integration as control valve on process valve In hazardous area

  • Food and beverage
  • Pharmaceutical processing equipment
  • Cosmetic processing equipment
  • Textile dyeing / drying machines
  • Sterilizers
  • Water treatment / processing equipment
  • Pulp and paper processing equipment Design/Function Types 6510/6511 Ex are with high switch reliability diaphragm valves in 3/2 and 5/2 way versions. The valve consists of a diaphragm reinforcement as main valve and a 10 mm rocker solenoid valve with DC-coil as pilot. The valve module system is suitable for a wide variety of complex control applications, with the logical, modu- lar construction in respect of its electrical and fluid interfaces. Types 6510 and 6511 are expandable and preferably suitable for valve blocks with plug connection at the back, or in front by easily turning the pilot valve 180 ° . The electrical connections can be made either via common connections, Multipole or field bus interfaces. Fluid Control Systems The operation principle allows to switch high pressures in spite of small electrical performances. The valve range allows many diffe- rent application possibilities with regard to controller, dimensions, flow and performance. The valves can easily be interchanged. The housing and connecting modules are made of high quality thermoplastic, and are easy to connect or disconnect with the integrated latching techique. The block assembly takes place with use of the pneumatic modules MP01 (for type 6510) and MP02 (for type 6511) through integrated lock technology and screwing.

Type 6510/6511Multi-Way Valves for Pneumatics servo-assisted, extendable, 10 mm wide Technical data type 6510/6511 Ex C 3/2 way valve type 6510, in de-energized position port 2 exhausted Specifications 1) Measured at 6 bar input pressure and 1 bar pressure drop at the valve and at +20˚C. 2) All pressure data as overpressure to ambient atmospheric pressure. Valve specifications Solenoid specifications Valve body Polyamide (PA) Sealing material FPM and NBR Media Lubricated or unlubricated compressed air, neutral gases Media temperature –10 up to +50 ° C Ambient temperature –10 up to +60 °C Response times 3) Open (On) 23 ms Close (Off) 27 ms

  • Port connections Sub base at the valve
  • Supply ports 1/3/5 at Threaded port G 1/8 or the connection module plug-in coupling ø 8 mm
  • Service ports 2/4 at Threaded port M5 or the pneumatic module plug-in coupling ø 4 mm 3) Measured at connection 2; time from electrical switching to pressure increase to 90% (opening) or pressure drop to 10% (closing) of operational pressure (6 bar). Operating voltage 24 V/DC Voltage tolerance ± 10 % Electrical power consumption 0.5 W Duty cycle 100 % continuously rated Electr. connection Rectangular plug, 2 pole on top or downwards Rating IP 40 (with rectangular plug connection) Ex-approval EEx ia IIC T6 H 5/2 way valve type 6511, in de-energized position pressure port 1 connected to port 2, port 4 exhausted Circuit function Orifice Flow rate1) Pressure All Service Supply QNn-value air range 2) port connections ports ports at the back 2 and 4 at the 1/3/5 at the [mm] [l/min] [bar] of the valve pneumatic module connection module C (3/2) 2,5 130 2,5 - 7 sub-base M5 or G 1/8 or H (5/2) 2,5 130 2,5 - 7 sub-base plug-in coupling plug-in coupling ø 4 mm ø 8 mm 12 10 Circuit function Symbol SymbolCircuit function Installation
  • Preferably on multistation module assembly
  • Block assembly on MP01 or MP02 with DIN/EN-rail 50045 Mounting position any, preferably solenoid system upright Electrical specifications Power supply only from certified intrinsically safe circuits with following max. valves: Explosion group IIC Max. safety voltage U = 28 V Max. safety current I = 115 mA Consumption of energy P = 0.7 W for block mounting (ambient temperature +40 ° C) Consumption of energy P = 0.7 W for single mounting (ambient temperature +55 °C) P = 0.8 W (ambient temperature +50 °C)

Type 6510/6511Multi-Way Valves for Pneumatics servo-assisted, extendable, 10 mm wide Dimensions [mm] Type 6510 (3/2-way valve) with sub-base connection Type 6511 (5/2-way valve) with sub-base connection Screw 2x22 Torx T8 for plastic Optionally: Screw DIN 7985-M2x20 Screw 2x22 Torx T8 for plastic Optionally: Screw DIN 7985-M2x20 Version 1 Rectangular plug at the back; compatible with the multipole block assembly for multipole and field bus wiring. Version 2 Rectangular plug in front; for simple wiring with cable plugs. On Request Version 1 Rectangular plug at the back; compatible with the multipole block assembly for multipole and field bus wiring. Version 2 Rectangular plug in front; for simple wiring with cable plugs. On request

Type 6510/6511Multi-Way Valves for Pneumatics servo-assisted, extendable, 10 mm wide Scope of delivery: All valves with NBR and FPM seal material; sub-base version with mounting screws and sub-base seal; with rectangular plug on top; without electrical plug (see accessories) Ordering chart type 6510/6511 (other versions on request) Type 6510 and 6511 Circuit Orifice Flow rate Pressure Voltage/ Electrical Item No. Item No. function/type QNn value range frequency power with without air consumption manual override manual override [mm] [l/min] [bar] [V/Hz] [W] C/Type 6510 2.5 130 2,5 - 7 24/DC 0.5 139 411 R 139 412 J H/Type 6511 2,5 130 2,5 - 7 24/DC 0.5 139 413 K 139 414 L Module type MP01, 3/2-way (type 6510) Item No. Modules type MP01, 3/2-way (type 6510) Item No. Connector module left, G 1/8“ 132 408 Y Connector module left, NPT 1/8“ 133 464 Q Basic module 2 valves basis, M5 132 413 C Connector module left, plug-in coupling ø 8 mm 132 411 A Basic module 2 valves basis, plug-in coupling ø 4 mm 132 414 D Terminating module without supply port, left 132 405 M Basic module 3 valves basis, M5 132 415 E Connector module right, G 1/8“ 132 409 Z Basic module 3 valves basis, plug-in coupling ø 4 mm 132 416 F Connector module right, NPT 1/8“ 133 465 R Basic module 12 valves basis, M5 132 417 G Connector module right, plug-in coupling ø 8 mm 132 412 B Basic module 12 valves basis, plug-in coupling ø 4 mm 132 418 R Module type MP02, 5/2-way (type 6511) Item No. Module type MP02, 5/2-way (type 6511) Item No. Connector module left, G 1/8“ 135 005 J Connector module left, NPT 1/8“ 134 742 X Basic module 2 valves basis, M5 135 010 J Connector module left, plug-in coupling ø 8 mm 135 006 K Basic module 2 valves basis, plug-in coupling ø 4 mm 135 011 F Terminating module without supply port, left 135 007 L Basic module 3 valves basis, M5 135 012 G Connector module right, G 1/8“ 135 008 V Basic module 3 valves basis, plug-in coupling ø 4 mm 134 744 Z Connector module right, NPT 1/8“ 134 743 Y Basic module 12 valves basis, M5 135 013 H Connector module right, plug-in coupling ø 8 mm 135 009 W Basic module 12 valves basis, plug-in coupling ø 4 mm 135 014 A Ordering chart accessories Version Characteristics Item No. Blanking plug for plug-in coupling ø 4 mm 781 664 A Blanking screw G 1/8“ 631 019 Y Silencer G 1/8“ 780 779 Y Covering plate, complete for left-free valve spaces on MP01 642 148 R Covering plate, complete for left-free valve spaces on MP02 642 156 H Rectangular plug connector, straight, with 3 m cable for electrical single connection of valves 133 486 F Rectangular plug connector, with flying leads, 300mm length for individual single wiring 644 068 N

Type 6510/6511Multi-Way Valves for Pneumatics servo-assisted, extendable, 10 mm wide Block and wall mounting valves type 6510 (3/2 way) with pneumatic modules type MP01 Block design with connector module on the right and left (2 supply ports); block assembly with rectangular plug at the back (Version 1) and in front (Version 2) possible: rectangular plug connector necessary (see accessories)! Block design with connector module on the right (1 supply port) and terminating module on the left; Block assembly with rectangular plug at the back (Version 1) and in front (Version 2) possible: rectangular plug connector necessary (see accessories)! Specifications on design on a modular valve block, please see data sheet Customized Pneumatic Systems Solutions. Connector module – left – Connector module – right – Terminating module – left – Connector module – right – 12,5 66,5 236 33 5,5 0,5 11 11 66 + (n x 11) (n = number of valves) 445,5 *Ø 8 *17 16 15,5 Ø 3 Connections optionally G1/8, NPT 1/8 or plug-in coupling Ø 8 46,5 24,5 28 + (n x 11) 41 + (n x 11) Connections optionally plug-in coupling Ø4 or M5 * Measures are dropped for connection M5 n = number of valves

Type 6510/6511Multi-Way Valves for Pneumatics servo-assisted, extendable, 10 mm wide Block and wall mounting valves type 6511 (5/2 way) with pneumatic modules type MP02 Block design with connector module on the right (1 supply port) and terminating module on the left; Block assembly with rectangular plug at the back (Version 1) and in front (Version 2) possible: rectangular plug connector necessary (see accessories)! Specifications on design of a modular valve block, please see data sheet Customized Pneumatic Systems Solutions. Block design with connector modules on the right and left (2 supply ports); block assembly with rectangular plug at the back (Version 1) and in front (Version 2) possible: rectangular plug connector necessary (see accessories)! Connector module – left – Connector module – right – Connector module – right – Terminating module – left – Connections optionally G1/8, NPT 1/8 or plug-in coupling ø8 n = number of valves n = number of valves Connections optionally plug-in coupling ø4 or M5 * Measures are dropped for connection M5 Connections optionally G 1/8, NPT 1/8 or plug-in coupling ø8 In case of special requirements We reserve the right to make technical 805-GB/ 1-0156 please consult for advice. changes without notice.