643-503-04 MARL | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
How to Order: Telephone +44 (0)1229 582430 Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a represent ation relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply for products or service. PART NUMBER COLOUR LENS VOLTAGE CURRENT LUMINOUS WAVE OPERATING STORAGE DC (Vdc) DC (mA) INTENSITY LENGTH TEMP TEMP Vopr lopr lv@20mA (mcd) lp (nm) Topr Tstg 643-503-04 Red Colour Diffused 2.0 20 160 627 -40 ~ +85^ -40 ~ +85 Yes 643-509-04 Yellow Colour Diffused 2.1 20 80 590 -40 ~ +85^ -40 ~ +85 Yes 643-512-04 Green Colour Diffused 2.2 20 120 565 -40 ~ +85^ -40 ~ +85 Yes 643-501-04 Red Colour Diffused 2.0 20 11000 643 -40 ~ +95^ -40 ~ +100 Yes 643-521-04 Yellow Colour Diffused 2.1 20 16000 591 -40 ~ +95^ -40 ~ +100 Yes 643-532-04 Green Colour Diffused 3.4 20 23000 527 -40 ~ +95^ -40 ~ +100 Yes 643-930-04 Blue Colour Diffused 3.4 20 7000 470 -40 ~ +95^ -40 ~ +100 Yes 643-997-04 Cool White Colour Diffused 3.4 20 14000 see below -40 ~ +95^ -40 ~ +100 Yes UNITS Vdc mA mcd nm °C °C l Black anodised aluminium housing l Short body length is ideal for portable equipment l Wide viewing angle l Sealed to IP67 l Suitable for high vibration applications PROFESSIONAL LED INDICATORS Ø8.1mm Mounting SAMPLES AVAILABLE© MARL INTERNATIONAL LTD 2006 : DS 043/06 Issue 1 Ordering Information & Typical Technical Characteristics (Ta = 25°C) Mean Time Between Failure = 100,000 Hours. Luminous intensity figures refer to the unmodified discrete LED.
FEATURES
643 SERIES
PACK QUANTITY = 10 PIECES Page 1 of 3 Other voltages AC/DC available. Please contact our Technical Sales. ^ = Products must be derated according to the derating information. Each derating graph refers to specific LEDs. Appropriate LED numbers shown - Refer to p age 3 Intensities (lv) and colour shades of white (x,y co-ordinates) may vary between LEDs within a batch. 997F-C *Typical emission colour cool white x 0.245 0.361 0.356 0.264 y 0.229 0.385 0.351 0.220
Body Black Anodised Aluminium Nut Bright Nickel Plated Brass Panel Seal Viton Fresnel lens Polycarbonate Encapsulation PC5430 resin Lock Washer Spring Steel MATERIALS PUSH-ON CONNECTORS TECHNICAL CHARACTERISTICS OPTIONAL FLYING LEAD TERMINATIONS SERIES MAXIMUM MAXIMUM PANEL NUT MINIMUM MIN/MAX. POWER REVERSE CUTOUT MOUNTING MOUNTING PANEL DISSIPATION VOLTAGE TORQUE CENTRES THICKNESS mW Vdc mm Nm mm mm ORDER SUPPLY WIRE WIRE NO/DIAMETER DIAMETER COMMENTS CODE VOLTAGE COLOUR LENGTH OF OVER SUFFIX CONDUCTORS INSULATION
15 DC Products Red-anode / Black-cathode 150mm Customised
19/0.15mm 1.2mm lengths
19 DC Products Red-anode / Black-cathode 1000mm available
909-000-00 is brass tin plated. 910-000-00 is tin plated. For use with 643 series lamps. Dimensions in mm (Typical) Not to scale Page 2 of 3 Anode termination indicated by long pin. Mounting hole to be clean and burr free BS EN ISO 9001:2000 Approved Manufacturer Telephone +44 (0)1229 582430 Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a represent ation relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply for products or service. Dimensions in mm (Typical) Not to scale © MARL INTERNATIONAL LTD 2006 : DS 043/06 Issue 1 MOUNTING HOLE
How to Order: Telephone +44 (0)1229 582430 Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a represent ation relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply for products or service. SAMPLES AVAILABLE© MARL INTERNATIONAL LTD 2006 : DS 043/06 Issue 1 Page 3 of 3 BS EN ISO 9001:2000 Approved Manufacturer Derating Information 501 & 521 532 & 930 503 & 509 512