62T22-N0-040C GRAYHILL | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com Optical and Mechanical Encoders Optical Encoders SerieS 62T Thumbwheel with Pushbutton DiMeNSiONS in inches (and millimeters)

FeATUreS

  • Scroll and select functions
  • Sealed against dust and particles
  • Custom bezels that will blend with HMI grips and control panels
  • Optional integrated pushbutton with over three million actuations
  • MIL-STD-202 and MIL-STD-810F Compliant
  • Standard panel seal
  • Choice of cable length and termination

APPLiCATiONS

  • Scroll & select equipment in industrial and non-automotive transportation
  • Display selectors
  • Hand-grip joysticks Ø C-BORE .265 .200 ± .005 5,0 ][ Ø THRU HOLE .128 ± .002 3,25 ][ 4.00 ±.25 .830 21,08 ][ 1.500 ± .005 38,1][ 1.758 44,65 ][ .780 19,81][ .327 8,31][ .114 ±.015 2,9 ][ .640 16,26 ][ R.250 6,35 ][ .970 24,64 ][ .020 0,51 ][ .650 16,51 ][ .515 13,08 ][ .485 12,32 ][ OF WHEEL .125 3,18 ][ .020 0,51[] Ø.950 24,13][ CLOCKWISE ROTATION AMP CONNECTOR PN 7-215083-6 Unless otherwise specified, standard tolerances are: Linear ± .025 Diameter ± .010 Angle ± 2.0 0

Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com Optical Encoders SPeCiFiCATiONS environmental Specifications MIL-STD-810F Qualified Operating Temperature range: -400 C to 850 C Storage Temperature range: -550 C to 1000 C Humidity: 240 hours at 95% humidity at 300 C Mechanical Vibration: Harmonic motion with amplitude of 15g, within a varied frequency of 10 to 2000 Hz Mechanical Shock: Test 1: 100g for 6 ms half-sine wave with a velocity change of 12.3 ft/sec Test 2: 100g for 6 ms sawtooth wave with a velocity change of 9.7 ft/sec Pushbutton electrical and Mechanical Specifications rating: 10mA @ 5 Vdc Contact resistance: <10ohms Life: 3 million actuations minimum Contact Bounce: <4 ms make, <10ms break Actuation Force: N – None, 7–700g, 10 – 1000g. Thumbwheel Travel: .060 ± .015 in rotary electrical and Mechanical Specifications Operating Voltage: 5.00±0.25 Vdc Supply Current: 25mA Max. Output: Open collector phototransistor, external pull up resistors are required Output Code: Two-bit quadrature, channel A leads channel B by 90° electrically during clockwise rotation of the thumbwheel Logic high shall be no less than 3.8 Vdc Logic low shall be no greater than 0.8 Vdc Power Consumption: 125 mW Max. Mechanical Life: 1,000,000 cycles of operation for Low and Non-Rotational Torque. 500,000 cycles of operation for Medium Rotational Torque. 1 cycle is a rotation through all positions and a full return. Average rotational Torque: in-oz. Initially torque shall be within 75% of initial value throughout life. Materials and Finishes Face Plate: Plastic Housing: ABS Plastic Side Plate: Reinforced thermoplastic Wiper: Silicone rubber with adhesive Gasket: Silicone rubber with adhesive Wheel: Plastic Shaft: Aluminum Slide Springs: Music wire Detent Spring: Music wire Detent Balls: Nickel plated stainless steel PC Boards: NEMA grade FR4. Double clad with copper Plated with gold over nickel Pushbutton board is tin plating over copper LeD: Gallium Aluminum Arsenide Phototransistor: Gold and Aluminum Alloys Code Section Housing: Reinforced plastic Detent Housing: Thermoplastic Code rotor: Delrin 100 plastic Dome: Stainless steel Dome retainer: Delrin 100 plastic Slide rods: Stainless steel Splining Key: Stainless steel Actuator: Reinforced thermoplastic Screws: Aluminum or Stainless Wiper Plate: Copper Solder: Lead free (96.5% tin, 3% silver, 0.5% copper, no clean) WAVeFOrM AND TrUTH TABLe Available from your local Grayhill Component Distributor. For pricing an discounts, contact a local Sales Office, an authorized local Distributor, or Grayhill. 90˚± 45˚ N.O., MOMENTARY PUSHBUTTON SWITCH +5Vdc OUTPUT "A" OUTPUT "B" GROUND PUSHBUTTON PUSHBUTTON R* - TWO 2.2K RESISTORS REQUIRED FOR OPERATION. POSITION OUTPUT A OUTPUT B Indicates logic high; blank indicates logic low. Code repeats every 4 positions. POS POS POS POS POS POS OUTPUT A HIGH (3.8-5V) LOW (0-.8V) OUTPUT B HIGH (3.8-5V) LOW (0-.8V) 62T22-XX-040C Series Pushbutton Option: 0=No Pushbutton, 7=700 grams, 10=1000 grams Termination: C = .050 Center ribbon Cable with connector Cable Termination: 040=4.0 inches. Cable is terminated with Amp Connector P/N 7-215083-6. See Amp Mateability Guide for Mating Connector details. Rotational Torque: N = Non-Detent, L=Low Torque, M=Medium Torque Angle of Throw: 22 = 22.5° for code change and 16 detent positions