62P GRAYHILL | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.gr ayhill.com Optical Encoders

FEATURES

 Low Cost  Compact Size  PC Mount  No De-Bouncing Required  Reliable, Up to 2 Million Cycles  Choice of Detent and Pushbutton Force  Available in 16 Positions  Quadrature Output DIMENSIONS In inches (and millimeters) APPLICATION  Automotive Controls  White Goods  Audio SERIES 62P Low Cost, PC Mount CIRCUITRY Encoder 1POWER (+5.0 V) OUTPUT B OUTPUT A GROUND PUSHBUTTON PUSHBUTTON 10K * 10K * 150 * *10K EXTERNAL PULL-UP RE SISTORS REQUIRED ON PIN 3 AND PIN 4 *150 EXTERNAL RESISTOR REQUIRED ON PIN 1 TOLERANCE: ±.002 SUGGESTED HOLE LAYOUT DETAIL .109 (2,77) 4 PLCS. .525 (13,34) .403 (10,24) .403 (10,24) Ø.187±.004 (4,75±0,1) Ø.375 (9,53) Ø.059±.002 (1,5±0,05) .335 (8,51) .805 (20,45) .156±.004 (3,96±0,1) .030 (0,76) .700 (17,78) .220 (5,59) .325 (8,26) .660±.015 (16,76±0,38) .038 (0,96) 4 PLCS. .332 (8,43) .366 (9,29) CHAMFER .025 X 45° .403 (10,24) 6 PLCS. .202 (5,14) .655 (16.64) .400 (10,16) .250 (6,35) .100 (2,54) .625 (15,88) .200 (5,08) .080 (2,03) .250 (6,35) .070 (1,78) 4 PLCS. .064 (1,63) .100 (2,54) 2 PLCS..250 (6,35) .263 (6,67) .400 (10,16) .042 (1,07) 6 PLCS. .365 (9,27) .730 (18,54) .200 (5,08) 2 PLCS. 3 2 1 56 4 .030 (0,76) .250±.004 (6.35±0,1) .660±.0 (16,76±0 .219±.002 (5,56±0,1) .625 (15,88) .403 (10,24) 6 PLCS. .250 (6,35) .080 (2,03).805 (20,45) .335 (8,51) Ø.059±.002 (1,5±0,05) .025 X 45° .366 (9,29) .332 (8,43) CHAMFER .030 (0,76) Ø.375 (9,53) .700 (17,78) .030 (0,76) .038 (0,96) 4 PLCS. .220 (5,59) .325 (8,26) .100 (2,54) .250 (6,35) .201 (5,14) .400 (10,16) .200 (5,08) .655 (16.64) ±.010 TOLERANCE APPLIES TO ALL DIMENSIONS UNLESS OTHERWISE NOTED PIN DESIGNATION

Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.gr ayhill.com Optical and Mechanical Encoders Optical Encoders WAVEFORM AND TRUTH TABLE Standard Quadrature 2-bit Code SPECIFICATIONS Electrical Ratings Operating Voltage: 5 Vdc +/-.25 Vdc Supply Current: 30mA maximum at 5 Vdc Logic High: 3.0V minimum Logic Low: 1.0V maximum Logic Rise and Fall: less than 30 ms Pushbutton Switch Ratings Rating: 5.0 Vdc at 10mA resistive Contact Resistance: less than 10 ohms (TTL or CMOS compatible) Voltage Breakdown: 250 Vac between mutually insulated parts Contact Bounce: less than 4 ms at make and less than 10 ms at break Actuation Life: 3,000,000 operations Actuation Force: 6: 600 +/- 200 grams 4: 450 +/- 150 grams Shaft Travel: .015 ± .010 inch Mechanical Ratings Operating Torque: H: 1.4 in-oz +/- 0.6 in-oz initial L: 0.6 in-oz +/- 0.3 in-oz initial ∠0.5 in-oz initial Rotational Life: H&L: 500,000 cycles N: 2 million cycles (1 cycle = 360 degree rotation and return) Shaft Push Out Force: 20 lbs minimum Operating Speed: 100 RPM maximum Axial Shaft Play: .010 maximum Environmental Ratings Operating Temperature Range: -40°C to 85°C Storage Temperature Range: -55°C to 100°C Relative Humidity: 90-95% at 40°C for 96 hours Vibration Resistance: Harmonic motion with Amplitude of 15g, within a varied 10 to 2000 Hz frequency for 12 hours per MIL-STD-202, Method 204 Mechanical Shock Resistance: Test 1: Tested at 100g for 6mS, half sine, 12.3 ft/s. Test 2: 100g for 6mS, Sawtooth, 9.7 ft/s Materials and Finishes Code/Pushbutton Housing: Thermoplastic Shaft: Thermoplastic Code/Detent Rotor: Reinforced Thermoplastic Bushing: Thermoplastic Terminal Pins: Brass, Tin plated Detent Spring: Stainless Steel Dome: Stainless Steel Pushbutton Contact: Nickel plated brass Phototransistor: Planar Silicon Detent Balls: .0625 dia. Stainless Steel Infrared Emitter: Gallium Aluminum Arsenide Label: White Thermal Transfer Cast Film. Adhesive Coated Bracket: Stainless Steel, Tin plated

ORDERING INFORMATION

POWER (+5.0 V) OUTPUT B OUTPUT A GROUND PUSHBUTTON PUSHBUTTON 10K * 10K * 150 * *10K EXTERNAL PULL-UP RESISTORS REQUIRED ON PIN 3 AND PIN 4 *150 EXTERNAL RESISTOR REQUIRED ON PIN 1 HIGH LOW HIGH LOW OUTPUT A OUTPUT B POS. POS. POS. POS. POS. POS. POSITION OUTPUT A OUTPUT B INDICATES LOGIC HIGH CODE REPEATS EVERY FOUR POSITIONS. 62PXX-XXX62PXX-XXX Rotational Torque: N - Non-detent L - Low torque H - High torque Series Angle of Throw: 22-16 Position (22°) Pushbutton Force: 0 - No Pushbutton 4 - 450 grams 6 - 600 grams Shaft Option: Blank - Standard Ø.187 Shaft S - Ø.250 Shaft Sleeve