62HR45-H9-020S GRAYHILL | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

1/2'' Package, Redundant Circuitry High Torque DIMENSIONS in inches (and millimeters)

FEATURES

  • Redundant Circuitry
  • 1 Million Rotational Cycles
  • Compatible with CMOS, TTL and HCMOS Logic
  • Optional Integral Pushbutton
  • Available in 12, 16, 24, and 32 Detent Positions
  • Choices of Cable Length and Ter- minations
  • Ideal for Critical Applications

APPLICATIONS

  • Cockpit Controls
  • Medical Equipment SERIES 62HR WITH .050 CENTER RIBBON CABLE SERIES 62HR WITH .050 CENTER TERMINAL PINS UNLESS OTHERWISE SPECIFIED, STANDARD TOLERANCE IS ±.010 (0,25). UNLESS OTHERWISE SPECIFIED, STANDARD TOLERANCE IS ±.010 (0,25). .540 (13,72) .066±.002 (1,68±0,05) .250 (6,35) .500 (12,70) .250 (6,35) .152±.002 (3,86±0,05) .490 (12,45) .375 (9,53) .750 (19,05) .250±.005 (6,35±0,13) .375±.015 (9,52±0,38) .312 (7,92) .751±.015 (19,08±0,38) .845±.015 (21,46±0,38) DIM "XXX" ±.20 (±5,1) .110 (2,79) 3/8-32 UNEF-2A THREAD THREADS TO BE WITHIN .030 (0,76) OF SHOULDER.

28 AWG CABLE

.050 (1,27) CENTERS CONNECTOR IS AMP P/N 1-215083-0 OR EQUIVALENT. .236 (5,99) .219±.003 (5,56±0,08) .460 (11,68) .845±.015 (21,46±0,38) .751±.015 (19,08±0,38) .312 (7,92) .375±.015 (9,52±0,38) .250±.005 (6,35±0,13) .250 (6,35) .500 (12,70) .152±.002 (3,86±0,05) .250 (6,35) .540 (13,72) .066±.002 (1,68±0,05) .375 (9,53) .750 (19,05) .490 (12,45) 3/8-32 UNEF-2A THREAD THREADS TO BE WITHIN .030 (0,76) OF SHOULDER. .110 (2,79) .236 (5,99) .219±.003 (5,56±0,08) PINS ARE .016 (0,41) SQUARE .250±.002 (6,35±0,05) .250±.002 (6,35±0,05) 1.075±.020 (27,31±0,50) .230±.025 (5,84±0,64) .440 REF. (11,18) Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com Optical and Mechanical Encoders Optical Encoders

CIRCUITRY, TRUTH TABLE, AND WAVEFORM Standard Quadrature 2-Bit Code POSITION OUTPUT "A" OUTPUT "B" INDICATES LOGIC HIGH. BLANK INDICATES LOGIC LOW. CODE REPEATS EVERY 4 POSITIONS DECK A OUTPUT "B" DECK B OUTPUT "A" DECK B OUTPUT "B" DECK A GROUND PUSHBUTTON N.O. PIN #Switch Schematic Truth Table (CW Rotation) LOW LOW HIGH HIGH OUTPUT "A" OUTPUT "B" POS. POS. POS. POS. POS. POS. Wave Form (CW Rotation) 100Ω OUTPUT "A"OUTPUT "B" DECK A DECK B LOW HIGH LOW HIGH OUTPUT "A" OUTPUT "B" DECK B POWER 5V DECK A OUTPUT "A" 100Ω DECK A DECK B 1DECK B GROUND DECK A POWER 5V * 2.2k EXTERNAL PULL-UP RESISTORS REQUIRED FOR OPERATION

ORDERING INFORMATION

Style: HR = High Torque, Redundant Angle of Throw: 45 = 45° or 8 positions,30 = 30° or 12 positions, 22 = 22.5° or 16 positions Termination: S = stripped cable, C = connector, P = pins Cable Length: 020 = 2.0 inches. Cable is terminated with Amp Connector P/N 1-215083-0. See Amp Mateability Guide for mating connector details. *Eliminate cable length if ordering pins. (Ex: 62HR22-H9-P) Pushbutton Option: 0 = w/o pushbutton, 9 = 1100g pushbutton Rotational Torque: H = High Torque 62HRXX-XX-020X SPECIFICATIONS Pushbutton Switch Ratings Rating: at 5 Vdc, 10 mA, resistive Contact Resistance: less than 10 ohms (TTL or CMOS compatible) Pushbutton Life: 3 million actuations minimum Voltage Breakdown: 250 Vac between mutually insulated parts Contact Bounce: less than 4 mS at make and less than 10 mS at break Actuation Force: 1100 ±300g Encoder Ratings Coding: 2-bit quadrature coded output Operating Voltage: 5.0 ±.25 Vdc Supply Current: 30 mA maximum@5.0 Vdc Logic Output Characteristics: Logic High: 3.0 Vdc minimum Logic Low: 1.0 Vdc maximum Mechanical Life: 1,000,000 cycles minimum (One cycle is a rotation through all positions and a full return) Minimum Sink Current: 2.0 mA for 5 Vdc Power Consumption: 150mW maximum Output: open collector phototransistor Logic Rise and Fall: less than 30 mS maximum Operating Torque: 5.0 in-oz +/- 1.5 in-oz initial Shaft Push Out Force: 45 lbs minimum Mounting Torque: 15 in-lbs maximum Terminal Strength: 15 lbs cable pull-out force minimum Operating Speed: 100 RPM maximum Environmental Ratings Operating Temperature Range: -40°C to 85°C Storage Temperature Range: -55°C to 100°C Vibration Resistance: Harmonic motion with amplitude of 15G, within a varied 10 to 2000 Hz frequency for 12 hours Mechanical Shock: Test 1: 100G, 6 mS, half sine, 12.3 ft/s; Test 2: 100G, 6 mS, sawtooth, 9.7 ft/s Relative Humidity: 90–95% at 40°C for 96 hours Materials and Finishes Code Housing: Reinforced thermoplastic Shaft: Stainless Steel Bushing: Zinc casting Shaft Retaining Ring: Stainless steel Detent Spring: Stainless steel Detent Ball: Stainless steel Detent Section: Hiloy 610 Printed Circuit Boards: NEMA grade FR-4 gold over nickel or palladium Terminals: Brass, tin-plated Mounting Hardware: One brass, nickel-plated nut and zinc-plated spring steel with clear trivalent chromate finish lockwasher supplied with each switch. (Nut is 0.094 inches thick by 0.433 inches across flats) Rotor: Thermoplastic Pushbutton Dome: Stainless steel Phototransistor: Planar Silicon NPN Infrared Emitter: Gallium aluminum arsenide Flex Cable: 28 AWG, stranded/top coated wire, PVC coated on .050" centers (cabled version) Header Pins: Brass, tin-plated Spacer: Hiloy 610 Shim: Stainless Steel Backplate/Strain Relief: Stainless steel Optical and Mechanical Encoders Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com Optical Encoders