ME6209 MICRONE | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 14
Technical content
V12 www.microne.com.cn Page 1 of 14 ME6209 Low Power Consumption LDO ME6209 Series General Description Features Typical Application Package Cameras, video recorders ● 3-pin SOT23 -3、SOT89-3、TO-92 Voltage regulator for microprocessor Voltage regulator for LAN cards Wireless communication equipment Audio/Video equipment Typical Application Circuit The ME 6209 series are a group of positive voltage output, three –pin regulator, that provide a high current even when th e input/output Voltage differential is small. Low power consumption and high accuracy is achieved through CMOS technology. They allow input voltages as high as 18V. Ultra low quiescent current: 3.0uA(typ) High input voltage (up to 18V) Low dropout voltage :80mV@Iout=40mA （VOUT=3.3V） Output voltage accuracy： ±2％ Maximum output current：250mA (VOUT =3.3V） Low temperature coefficient
V12 www.microne.com.cn Page 2 of 14 Selection Guide ME6209X X G Environment mark Package: M3--SOT23-3 X Function Product Type Product Series Microne X X Output Voltage P--SOT89-3 T--TO92 product series product description ME6209A18M3G VOUT =1.8V； Package：SOT23-3 ME6209A25TG VOUT =2.5V； Package：TO-92 ME6209A27M3G VOUT =2.7V； Package：SOT23-3 ME6209A33PG VOUT =3.3V； Package:：SOT89-3 ME6209A44PG VOUT =4.4V； Package:：SOT89-3 ME6209A50M3G VOUT =5.0V； Package：SOT23-3 NOTE: At present ,there are five kinds of voltage value： If you need other voltage and package, please contact our sales staff。
V12 www.microne.com.cn Page 3 of 14 Pin Configuration SOT23-3 SOT89-3 TO-92 Pin Assignment Pin Num Symbol Function SOT89-3/TO-92 SOT23-3 1 1 VSS Ground 2 3 VIN Input 3 2 VOUT Output Block Diagram
V12 www.microne.com.cn Page 4 of 14 Absolute Maximum Ratings Parameter Symbol Ratings Units Input Voltage VIN 18 V Output Voltage VOUT Vss-0.3～VIN +0.3 V Output Current IOUT 500 mA Operating Temperature Range TOPR -45～＋150 ℃ Storage Temperature Range TSTG －55～＋150 ℃ Power Dissipation SOT89-3 PD 500 mW TO-92 500 SOT23-3 300
Electrical Characteristics
(VIN= VOUT+1.0V，CIN=CL=10uF，Ta=25OC, unless otherwise noted) Parameter Symbol Conditions Min. Typ. Max. Units Output Voltage VOUT(E) (Note 2) IOUT=10mA, VIN=VOUT+1V X 0.98 VOUT (T) (Note 1) X 1.02 V Input Voltage VIN 18 V Maximum Output Current IOUT _max VIN=VOUT+1V 250 mA Load Regulation ∆VOUT VIN=VOUT+1V, 1mA≤IOUT≤60mA 10 40 mV Dropout Voltage (Note 3) VDIF IOUT =40mA 150 mV Supply Current ISS VIN=VOUT+1V 3 5 μ A Line Regulations ∆VOUT ∆VIN ×VOUT IOUT =10mA VOUT+1V ≤VIN≤18V 0.1 0.2 %/V △VOUT/△Ta Temperature Coefficient VIN=VOUT+1V, IOUT =10mA -40℃<Ta<85℃ ± 0.7 mV/℃
V12 www.microne.com.cn Page 5 of 14 ME6209A25 (VIN= VOUT+1.0V，CIN=CL=10uF，Ta=25OC, unless otherwise noted) Parameter Symbol Conditions Min. Typ. Max. Units Output Voltage VOUT(E) (Note 2) IOUT=10mA, VIN=VOUT+1V X 0.98 VOUT (T) (Note 1) X 1.02 V Input Voltage VIN 18 V Maximum Output Current IOUT _max VIN=VOUT+1V 250 mA Load Regulation ∆VOUT VIN=VOUT+1V, 1mA≤IOUT≤60mA 10 40 mV Dropout Voltage (Note 3) VDIF IOUT =40mA 100 mV Supply Current ISS VIN=VOUT+1V 3 5 μ A Line Regulations ∆VOUT ∆VIN ×VOUT IOUT =10mA VOUT+1V ≤VIN≤18V 0.1 0.2 %/V △VOUT/△Ta Temperature Coefficient VIN=VOUT+1V, IOUT =10mA -40℃<Ta<85℃ ± 0.7 mV/℃ ME6209A27 (VIN= VOUT+1.0V，CIN=CL=10uF，Ta=25OC, unless otherwise noted) Parameter Symbol Conditions Min. Typ. Max. Units Output Voltage VOUT(E) (Note 2) IOUT=10mA, VIN=VOUT+1V X 0.98 VOUT (T) (Note 1) X 1.02 V Input Voltage VIN 18 V Maximum Output Current IOUT _max VIN=VOUT+1V 250 mA Load Regulation ∆VOUT VIN=VOUT+1V, 1mA≤IOUT≤60mA 10 40 mV Dropout Voltage (Note 3) VDIF IOUT =40mA 90 mV Supply Current ISS VIN=VOUT+1V 3 5 μ A Line Regulations ∆VOUT ∆VIN ×VOUT IOUT =10mA VOUT+1V ≤VIN≤18V 0.1 0.2 %/V △VOUT/△Ta Temperature Coefficient VIN=VOUT+1V, IOUT =10mA -40℃<Ta<85℃ ± 0.7 mV/℃
V12 www.microne.com.cn Page 6 of 14 ME6209A30 (VIN= VOUT+1.0V，CIN=CL=10uF，Ta=25OC, unless otherwise noted) Parameter Symbol Conditions Min. Typ. Max. Units Output Voltage VOUT(E) (Note 2) IOUT=10mA, VIN=VOUT+1V X 0.98 VOUT (T) (Note 1) X 1.02 V Input Voltage VIN 18 V Maximum Output Current IOUT _max VIN=VOUT+1V 250 mA Load Regulation ∆VOUT VIN=VOUT+1V, 1mA≤IOUT≤60mA 20 40 mV Dropout Voltage (Note 3) VDIF IOUT =40mA 80 mV Supply Current ISS VIN=VOUT+1V 3 5 μ A Line Regulations ∆VOUT ∆VIN ×VOUT IOUT =10mA VOUT+1V ≤VIN≤18V 0.1 0.2 %/V △VOUT/△Ta Temperature Coefficient VIN=VOUT+1V, IOUT =10mA -40℃<Ta<85℃ ± 0.7 mV/℃ ME6209A33 (VIN= VOUT+1.0V，CIN=CL=10uF，Ta=25OC, unless otherwise noted) Parameter Symbol Conditions Min. Typ. Max. Units Output Voltage VOUT(E) (Note 2) IOUT=10mA, VIN=VOUT+1V X 0.98 VOUT (T) (Note 1) X 1.02 V Input Voltage VIN 18 V Maximum Output Current IOUT _max VIN=VOUT+1V 250 mA Load Regulation ∆VOUT VIN=VOUT+1V, 1mA≤IOUT≤60mA 15 40 mV Dropout Voltage (Note 3) VDIF IOUT =40mA 80 mV Supply Current ISS VIN=VOUT+1V 3 5 μ A Line Regulations ∆VOUT ∆VIN ×VOUT IOUT =10mA VOUT+1V ≤VIN≤18V 0.05 0.2 %/V △VOUT/△Ta Temperature Coefficient VIN=VOUT+1V, IOUT =10mA -40℃<Ta<85℃ ± 0.7 mV/℃
V12 www.microne.com.cn Page 7 of 14 ME6209A36 (VIN= VOUT+1.0V，CIN=CL=10uF，Ta=25OC, unless otherwise noted) Parameter Symbol Conditions Min. Typ. Max. Units Output Voltage VOUT(E) (Note 2) IOUT=10mA, VIN=VOUT+1V X 0.98 VOUT (T) (Note 1) X 1.02 V Input Voltage VIN 18 V Maximum Output Current IOUT _max VIN=VOUT+1V 250 mA Load Regulation ∆VOUT VIN=VOUT+1V, 1mA≤IOUT≤60mA 15 40 mV Dropout Voltage (Note 3) VDIF IOUT =40mA 80 mV Supply Current ISS VIN=VOUT+1V 3 5 μ A Line Regulations ∆VOUT ∆VIN ×VOUT IOUT =10mA VOUT+1V ≤VIN≤18V 0.05 0.2 %/V △VOUT/△Ta Temperature Coefficient VIN=VOUT+1V, IOUT =10mA -40℃<Ta<85℃ ± 0.7 mV/℃ ME6209A40 (VIN= VOUT+1.0V，CIN=CL=10uF，Ta=25OC, unless otherwise noted) Parameter Symbol Conditions Min. Typ. Max. Units Output Voltage VOUT(E) (Note 2) IOUT=10mA, VIN=VOUT+1V X 0.98 VOUT (T) (Note 1) X 1.02 V Input Voltage VIN 18 V Maximum Output Current IOUT _max VIN=VOUT+1V 250 mA Load Regulation ∆VOUT VIN=VOUT+1V, 1mA≤IOUT≤60mA 15 40 mV Dropout Voltage (Note 3) VDIF IOUT =40mA 75 mV Supply Current ISS VIN=VOUT+1V 3 5 μ A Line Regulations ∆VOUT ∆VIN ×VOUT IOUT =10mA VOUT+1V ≤VIN≤18V 0.1 0.2 %/V △VOUT/△Ta Temperature Coefficient VIN=VOUT+1V, IOUT =10mA -40℃<Ta<85℃ ± 0.7 mV/℃
V12 www.microne.com.cn Page 8 of 14 ME6209A44 (VIN= VOUT+1.0V，CIN=CL=10uF，Ta=25OC, unless otherwise noted) Parameter Symbol Conditions Min. Typ. Max. Units Output Voltage VOUT(E) (Note 2) IOUT=10mA, VIN=VOUT+1V X 0.98 VOUT (T) (Note 1) X 1.02 V Input Voltage VIN 18 V Maximum Output Current IOUT _max VIN=VOUT+1V 250 mA Load Regulation ∆VOUT VIN=VOUT+1V, 1mA≤IOUT≤60mA 15 40 mV Dropout Voltage (Note 3) VDIF IOUT =40mA 70 mV Supply Current ISS VIN=VOUT+1V 3 5 μ A Line Regulations ∆VOUT ∆VIN ×VOUT IOUT =10mA VOUT+1V ≤VIN≤18V 0.05 0.2 %/V △VOUT/△Ta Temperature Coefficient VIN=VOUT+1V, IOUT =10mA -40℃<Ta<85℃ ± 0.7 mV/℃ ME6209A45 (VIN= VOUT+1.0V，CIN=CL=10uF，Ta=25OC, unless otherwise noted) Parameter Symbol Conditions Min. Typ. Max. Units Output Voltage VOUT(E) (Note 2) IOUT=10mA, VIN=VOUT+1V X 0.98 VOUT (T) (Note 1) X 1.02 V Input Voltage VIN 18 V Maximum Output Current IOUT _max VIN=VOUT+1V 250 mA Load Regulation ∆VOUT VIN=VOUT+1V, 1mA≤IOUT≤60mA 15 40 mV Dropout Voltage (Note 3) VDIF IOUT =40mA 70 mV Supply Current ISS VIN=VOUT+1V 3 5 μ A Line Regulations ∆VOUT ∆VIN ×VOUT IOUT =10mA VOUT+1V ≤VIN≤18V 0.05 0.2 %/V △VOUT/△Ta Temperature Coefficient VIN=VOUT+1V, IOUT =10mA -40℃<Ta<85℃ ± 0.7 mV/℃
V12 www.microne.com.cn Page 9 of 14 ME6209A50 (VIN= VOUT+1.0V，CIN=CL=10uF，Ta=25OC, unless otherwise noted) Parameter Symbol Conditions Min. Typ. Max. Units Output Voltage VOUT(E) (Note 2) IOUT=10mA, VIN=VOUT+1V X 0.98 VOUT (T) (Note 1) X 1.02 V Input Voltage VIN 18 V Maximum Output Current IOUT _max VIN=VOUT+1V 250 mA Load Regulation ∆VOUT VIN=VOUT+1V, 1mA≤IOUT≤60mA 15 40 mV Dropout Voltage (Note 3) VDIF IOUT =40mA 70 mV Supply Current ISS VIN=VOUT+1V 3 5 μ A Line Regulations ∆VOUT ∆VIN ×VOUT IOUT =10mA VOUT+1V ≤VIN≤18V 0.05 0.2 %/V △VOUT/△Ta Temperature Coefficient VIN=VOUT+1V, IOUT =10mA -40℃<Ta<85℃ ± 0.7 mV/℃ Note ： 1. VOUT (T) ：Specified Output Voltage 2.VOUT (E) ：Effective Output Voltage ( ie. The output voltage when “V OUT (T)+ 1.0V”is provided at the Vin pin while maintaining a certain IOUT value.) 3.VDIF：VIN1 –VOUT (E)’ VIN1 ：The input voltage when VOUT(E)’ appears as input voltage is gradually decreased. VOUT (E)’=A voltage equal to 98% of the output voltage whenever an amply stabilized IOUT and {VOUT (T)+ 1.0V} is input. Precautions During the test, if AC/DC power supply and the ceramic chip capacitors collocation are used, there may be serious voltage spike phenomenon instantaneously. When the power supply access to 16V, the voltage is rushed to about 30V instantaneously. Because of exceeding the limit voltage of chip, the chip is damaged. If you string a small resistance of 1 ohm in the input end during the test, the peak phenomenon can be avoided. In the test, there is serious burr phenomenon only when the AC/DC power is used with ceramic chip capacitors. But electrolytic capacitors and tantalum capacitance won't appear above phenomenon . Please be sure to pay attention to this point when you use AC/DC power. In normal use, when any type of capacitor is used with battery or the supply of fire power, the above phenomenon doesn’t occur.
V12 www.microne.com.cn Page 10 of 14 Type Characteristics (ME6209A40) （1） Output Voltage VS. Output Current（ Ta = 25 °C） (2) Output Voltage VS. Input Voltage Output Voltage VS.Output Current 3.5 3.6 3.7 3.8 3.9 4.1 4.2 0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300 Output Current(mA) Output Voltage(V) Output Voltage VS.Input Voltage 0.5 1.5 2.5 3.5 4.5 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Input Voltage(V) Output Voltage(V) Io=0mA Io=40mA (3) Quiescent Current VS. In put Voltage (4) Dropout Voltage VS. Output Current Quiescent Current VS.Input Voltage 0.5 1.5 2.5 3.5 0 2 4 6 8 10 12 14 16 18 20 Input Voltage(V) Quiescent Current(uA) Dropout Voltage VS.Output Current 100 200 300 400 500 600 0 50 100 150 200 250 300 Output Current(mA) Dropout Voltage(mV) (5) Output Voltage VS. Temperature（ME6209A33PG） Output Voltage VS.Temperature 3.1 3.15 3.2 3.25 3.3 3.35 -45 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 Temperature( ℃) Output Voltage(V)
V12 www.microne.com.cn Page 11 of 14 Packaging Information
- Packaging Type: SOT23-3 DIM Millimeters Inches Min Max Min Max A 1 1.5 0.0394 0.0591 A1 0 0.15 0.0000 0.0059 A2 0.9 1.3 0.0354 0.0512 A3 0.6 0.7 0.0236 0.0276 b 0.25 0.5 0.0098 0.0197 c 0.1 0.25 0.0039 0.0098 D 2.8 3.1 0.1102 0.1220 E 2.6 3.1 0.1023 0.1220 E1 1.5 1.8 0.0591 0.0709 e 0.95(TYP) 0.0374(TYP) L 0.25 0.6 0.0098 0.0236 L1 0.59(TYP) 0.0232(TYP) θ 0 8° 0.0000 8° c1 0.2(TYP) 0.0079(TYP) L1 0.59(TYP) 0.0232(TYP) θ 0 8° 0.0000 8° c1 0.2(TYP) 0.0079(TYP)
V12 www.microne.com.cn Page 12 of 14
- Packaging Type: SOT89-3 DIM Millimeters Inches Min Max Min Max A 1.4 1.6 0.0551 0.0630 b 0.32 0.52 0.0126 0.0205 b1 0.4 0.58 0.0157 0.0228 c 0.35 0.45 0.0138 0.0177 D 4.4 4.6 0.1732 0.1811 D1 1.55(TYP) 0.061(TYP) D2 1.75(TYP) 0.0689(TYP) e1 3.0(TYP) 0.1181(TYP) E 2.3 2.6 0.0906 0.1023 E1 3.94 4.4 0.1551 0.1732 E2 1.9(TYP) 0.0748(TYP) e 1.5(TYP) 0.0591(TYP) L 0.8 1.2 0.0315 0.0472 θ 45° 45°
V12 www.microne.com.cn Page 13 of 14
- Packaging Type:TO-92 DIM Millimeters Inches Min Max Min Max A 3.3 3.7 0.1299 0.1457 A1 1.1 1.4 0.0433 0.0551 b 0.38 0.55 0.015 0.0217 c 0.36 0.51 0.0142 0.0201 D 4.3 4.7 0.1693 0.185 D1 3.43 一 0.135 一 E 4.3 4.7 0.1693 0.185 e 1.27TYP 0.05TYP e1 2.44 2.64 0.0961 0.1039 L 14.1 14.5 0.5551 0.5709 h 0 0.38 0 0.015 Φ 一 1.6 一 0.063
V12 www.microne.com.cn Page 14 of 14 The information described herein is subject to change without notice. Nanjing Micro One Electronics Inc is not responsible for any problems caused by circuits or diagrams described herein whose related industrial pro perties, patents, or other rights belong to third parties. The application circuit examples explain typical applications of the products, and do not guarantee the success of any specific mass-production design. Use of the information described herein for other purposes and/or reproduction or copying without the express permission of Nanjing Micro One Electronics Inc is strictly prohibited. The products described herein cannot be used as part of any device or equipment affecting the human body, such as exer cise equipment, medical equipment, security systems, gas equipment, or any apparatus installed in airplanes and other vehicles, without prior written permission of Nanjing Micro One Electronics Inc. Although Nanjing Micro One Electronics Inc exerts the gre atest possible effort to ensure high quality and reliability, the failure or malfunction of semiconductor products may occur. The user of these products should therefore give thorough consideration to safety design, including redundancy, fire-prevention measures, and malfunction prevention, to prevent any accidents, fires, or community damage that may ensue.