61060 MICROPAC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918 www.micropac.com E-MAIL: optosales@micropac.com 6 - 16
61060 PHOTODIODE “PIGTAIL” Mii
Features:
- Hermetically sealed
- High sensitivity
- Small package
- Suitable for high-density pc board mounting
- Spectrally matched to the 62017 series LED. Applications:
- Incremental encoding
- Reflective sensors
- Position sensors
- Level sensors
DESCRIPTION
The 61060 is a Silicon Photodiode in a package designed to be mounted in a single-clad printed circuit board. It is available with a wide angle flat lens or narrow angle domed lens for minimum response to stray light. High sensitivity, low dark current leakage, and low saturation voltage make this device ideal for interfacing with TTL circuits. Also available with lead attached to the case so that it may be connected without the use of a printed circuit board. Available in custom binned to customer specifications or screened to MIL-PRF-19500. ABSOLUTE MAXIMUM RATINGS Package Dimensions Schematic Diagram 0.0490 0.1730 Ø0.0810Ø0.0810 -XX1 -XX2/XX3 UNLESS OTHERWISE NOTED ALL DIMENSIONS NOMINAL 0.450 min 0.1460 ANODE CATHODE 0.450 min Dia = 0.018 DIMENSIONS ARE IN INCHES A K
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918 www.micropac.com E-MAIL: optosales@micropac.com 6 - 17
61060 SILICON PHOTODIODE “PIGTAIL”
ELECTRICAL CHARACTERISTICS
TA = 25°C unless otherwise specified. PARAMETER SYMBOL MIN TYP MAX UNI TS TEST CONDITIONS NOTE Light Current 61060-XXX IL 5.0 15 µA VR = 5.0V, H = 20mW/cm2 1 Dark Current 61060-XXX ID 25 nA V R = 10V, H = 0 1 Reverse Breakdown Voltage 61060-XXX VBR 50 V I R = 5µA, H = 0 Rise Time 61060-XXX tr 300 nS V R = 5V, Angular Response 61060-X01 61060-X02 θ 30 degrees 2 NOTES: 1. Irradiance in mW/cm 2 from a tungsten source at a color temperature of 2870K. 2. The angle between incidence for peak response and incidence for 50% of peak response. RECOMMENDED OPERATING CONDITIONS: PARAMETER SYMBOL MIN MAX UNITS Reverse Voltage V R 51 0 V Irradiance (H) H 15 25 mW/cm 2 SELECTION GUIDE PART NUMBER PART DESCRIPTION IL Range 61060-001 Photodiode in coax package, domed lens, commercial version +5µA 61060-101 Photodiode in coax package, domed lens with 100% screening +5µA 61060-002 Photodiode in coax package, flat lens, commercial version +5µA 61060-102 Photodiode in coax package, flat lens with 100% screening +5µA