60DAW GAPTEC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 1 of 2 60DAW_1.6 – Rev. 2020-1.0 Specifications subject to change without notice. 60DAW_1.6 Series 60W - Single Output - Wide Input - Isolated & Regulated DIP DC-DC Converter High efficiency up to 91% 2:1 wide input voltage range Isolation voltage 1600VDC Six-sided metal shield Short circuit protection (SCP) (automatic recovery) Operating temperature: -40°C to +85°C Over load protection Over temperature protection Industry standard pinout Remote On/Off DC-DC Converter 60 Watt The 60DAW_1.6 series offers 60W of output, 2:1 wide input voltage of 18-36VDC, 36-72VDC and features 1600VDC isolation, six-sided metal shield over current and short circuit protection. All models are particularly suited to industry control systems, semiconductor equipment, wireless network, telecom/datacom, measurement etc. Example: 60DAW_2415S1.6 60 = 60Watt; D = DIP; A = series; W = wide input (2:1) 18-36Vin; 15Vout; S = single output; 1.6 = 1600VDC Common specifications Cooling: Free air convection Short circuit protection: Hiccup, auto-recovery Operation temperature range: -40°C~+85°C / refer to temperature derating graph (with derating) Storage temperature range: -55°C~+125°C Case temperature: +110°C Lead temperature range: 260°C MAX, 1.5mm from case for 10 sec Switching frequency: 300kHz TYP Humidity: non-condensing, 5%-95% MAX Case material: Copper Potting material: Epoxy (UL94V-0 rated) MTBF (MIL-HDBK-217F @25°C): >109,600 hours, Ground benign Weight: 48.6g Dimensions: 50.8 x 25.4 x 13.1mm 50.8 x 25.4 x 17.8mm (with heatsink) Note: 1. Input voltage can’t exceed this value, or will cause the permanent damage. 2. The load shouldn‘t be less than 5%, otherwise ripple will increase dramatically. 3. Max. Capacitive Load is tested on Vin-nominal and full load. 4. All specifications measured at Ta=25°C, humidity<75%, nominal input voltage and rated output load unless otherwise specified. 5. In this datasheet, all the test methods of indications are based on corporate standards. 6. Only typical models listed, other models may be different, please contact our technical person for more details. 7. Specifications subject to change without notice. Isolation specifications Item Test condition Min Typ Max Units Isolation voltage 1600 VDC Isolation resistance Test at 500VDC 1000 MΩ Isolation capacitance 2200 pF Output specifications Item Test condition Min Typ Max Units Voltage tolerance ±2 % External trim adj. range of output ±10 % Over load protection Input voltage range 150 % Line regulation ±0.5 % Load regulation 10%-100% ±0.5 % Ripple and noise 20MHz Bandwidth, 1.0µF ceramic capacitor 100 mVp-p External trim adj. range ±10 % Transient response setting time 25% load step change 250 µs Input specifications Item Test condition Min Typ Max Units Voltage type 2:1 Filter Pi type Protection Fuse recommended Remote ON/OFF3) • ON
- OFF Open Short to -Vin
GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 2 of 2 60DAW_1.6 – Rev. 2020-1.0 Specifications subject to change without notice. 60DAW_1.6 Series 60W - Single Output - Wide Input - Isolated & Regulated DIP DC-DC Converter Part Number Input Voltage Range [VDC] Input current [mA, typ] no load full load Output Voltage [VDC] Output Current [mA] Efficiency [%, Typ.] Capacitive load [µF, max.] 60DAW_2403S1.6 18-36 90 2160 3.3 14000 87 16500 60DAW_2405S1.6 18-36 90 2760 5 12000 88 16500 60DAW_2412S1.6 18-36 40 2780 12 5000 89 3300 60DAW_2415S1.6 18-36 40 2780 15 4000 89 2200 60DAW_4803S1.6 36-72 60 1010 3.3 14000 88 16500 60DAW_4805S1.6 36-72 60 1360 5 12000 89 16500 60DAW_4812S1.6 36-72 30 1380 12 5000 90 3300 60DAW_4815S1.6 36-72 30 1370 15 4000 91 2200 Typical characteristics Recommended test circuit Mechanical dimensions Temperature derating curve Product Selection Guide Note: Unit: mm[inch] Tolerance: xx.x ±0.5mm, xx.xx ±0.25 without heatsink with heatsink PIN connections PIN 1 2 3 4 5 6 Function +Vin -Vin Ctrl +Vout -Vout Trim