6014

6013 BURKERT | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 17

Technical content

Visit product website  Kick and Drop coilsVisit product website  DATA SHEET Type 6013  Plunger valve 2/2-way direct-acting Type 6014  Plunger valve 3/2-way direct-acting Type 6027  Direct-acting 2/2-way plunger valve Type 6213  Servo-assisted 2/2- way diaphragm valve Type 6281  Servo-assisted 2/2- way diaphragm valve Type 5404  Servo-assisted 2/2- way piston valve Type 6240  Servo-assisted 2/2- way piston valve Standard | EU | en | 2023-11-16 | 04 © Christian Bürkert GmbH & Co. KG, changes reserved Solenoids with Kick and Drop

• Two windings encapsulated in one coil with epoxy Inrush power increases performance and differential pressure range for small installation volumes Holding power reduces to less than 1 W with over 80% energy saved Less heating reduces calcification and increases service life Internal electronics assembly covers direct and alternating voltage with frequencies 50 Hz and 60 Hz The Kick and Drop variants of the AC10 and AC19 coil types use two wind- ings in one solenoid. Thanks to an increased inrush power for the first wind- ing, the switchable pressure range is increased as installation volumes stay the same. The second winding is switched in series after 500 ms. Thanks to this reduced holding power, energy is saved and coil heating is reduced. Product variants described in the data sheet may differ from the product presentation and description. Type descriptionCan be combined with

2 | 17 Kick and Drop coilsVisit product website  Table of contents 1. General technical data 3 Materials 2.2. Material specifications 3. Dimensions 5 3.2. Standard version AC19 4. Ordering information 6 4.2. Bürkert product filter 4.3. Ordering chart for Kick and Drop coil sets 4.4. Ordering chart for Type 6013 with Kick and Drop coil 4.5. Ordering chart for Type 6014 with Kick and Drop coil 4.6. Ordering chart for Type 6026 with Kick and Drop coil 4.7. Ordering chart for Type 6027 with Kick and Drop coil 4.8. Ordering chart for Type 6213 with Kick and Drop coil 4.9. Ordering chart for Type 6281 with Kick and Drop coil 4.10. Ordering chart for Type 5404 with Kick and Drop coil 4.11. Ordering chart for Type 6240 with Kick and Drop coil 4.12. Ordering chart for Type 6407 with Kick and Drop coil 4.13. Cable plug Type 2518, form A according to DIN EN 175301 803 Cable plug Type 2509, form A according to DIN EN 175301 803

3 | 17 Kick and Drop coilsVisit product website  1. General technical data Product properties Dimensions Detailed information can be found in chapter “3. Dimensions” on page 5 Material1.) Seal FKM Coil Epoxy Thermal insulation class of solenoid Epoxy class H Performance data Switching frequency AC10 Max. 10 cycles/min AC19 Max. 30 cycles/min Electrical data Operating voltage 24 V/50…60 Hz and 24 V/DC, 110…120 V/50…60 Hz, 230…240 V/50…60 Hz Single valve duty cycle Continuous operation 100% duty cycle Voltage tolerance ± 10% Approvals and certificates Degree of protection IP65 with cable plug, IP67 with cable plug Type 2518 (for possible versions see data sheet Type 2518 UL cURus Process/Port connection & communication Electrical connection According to DIN EN 175 301 803, form A for cable plug Type 2518 and Type 2509 (see “4.13. Ordering chart for accessories” on page 16 Cable or terminal box at AC19 Environment and installation Ambient temperature Max. 55 °C (higher temperatures available on request) 1.) The following materials are not in contact with the medium due to the push-over coil system.

4 | 17 Kick and Drop coilsVisit product website  2. Materials 2.1. Chemical Resistance Chart – Bürkert resistApp Bürkert resistApp – Chemical Resistance Chart You want to ensure the reliability and durability of the materials in your individual application case? Verify your combination of media and materials on our website or in our resistApp. Start Chemical Resistance Check 2.2. Material specifications No. Element Material

1 Nut DIN 176 thick film passivated or stainless steel

2 Coil Epoxy

3 Seal FKM

5 | 17 Kick and Drop coilsVisit product website  3. Dimensions 3.1. Standard version AC10 Note: Dimensions in mm 3.2. Standard version AC19 Note: Dimensions in mm

6 | 17 Kick and Drop coilsVisit product website  4. Ordering information 4.1. Bürkert eShop – Easy ordering and quick delivery Bürkert eShop – Easy ordering and quick delivery You want to find your desired Bürkert product or spare part quickly and order directly? Our online shop is available for you 24/7. Sign up and enjoy all the benefits. Order online now 4.2. Bürkert product filter Bürkert product filter – Get quickly to the right product You want to select products comfortably based on your technical requirements? Use the Bürkert product filter and find suitable articles for your application quickly and easily. Try out our product filter 4.3. Ordering chart for Kick and Drop coil sets Note: As replacement demand or for retrofitting Set contains Kick and Drop solenoid, seal and fixing nut Further variants with alternative voltages available on request. Coil type Recommended solenoid valves1.) Electrical connection Coil power Article no. Inrush power Holding power AC/DC 230/AC [W] [W] [V/Hz] [V/Hz] AC10 40 mm 6013, 6014

6213 DN 10…20,

6281, 5404, 6240 DN 6 DIN EN 175 301 803, form A 12 0.6 20044994  – DIN EN 175 301 803, form A 20 2 20045040  20045049  DIN EN 175 301 803, form A 65 7 20045051  20045062  AC19 42 mm 6026, 6027,

6213 DN 13…40,

6407, 6240 DN 12 DIN EN 175 301 803, form A 44 6.5 350043  389296  Cable ATEX/IECEx 44 6.5 389296  389297  Terminal box ATEX/IECEx 44 6.5 389298  389299  DIN EN 175 301 803, form A 85 8.5 338843  338845  1.) Guaranteed use depends on the version in question and can only be confirmed by discussing it with your Bürkert contact person.

7 | 17 Kick and Drop coilsVisit product website  4.4. Ordering chart for Type 6013 with Kick and Drop coil The Type 6013 valve is a direct-acting 2/2-way plunger valve. The Kick and Drop coil enables the holding power to be reduced by up to 10 watts, depending on the version, and an increase in the pressure range for the normally closed version. Note: For more information on the solenoid valve, see data sheet Type 6013 Further variants with stainless steel body without short circuit ring, alternative voltages, NPT or RC internal threads, as flange version or other seal materials available on request. Circuit function Port con- nection Orifice KV value water Coil power Pressure range Article no. Inrush power Holding power AC/DC 230…240/AC [mm] [m 3/h] [W] [W] [bar] [V/Hz] [V/Hz] Brass body, G internal thread, seal material FKM/FKM CF A 2/2-way solenoid valve Direct-acting Normally closed 2 (A) 1 (P) G ⅛ 1.0 0.04 12 0.6 0…60 20046576  X G ¼ 2.0 0.12 12 0.6 0…20 20046577  X 3.0 0.23 12 0.6 0…6 20046578  X 4.0 0.30 12 0.6 0…2 20046579  X 6.0 0.55 12 0.6 0…0.5 20046580  X G ⅛ 1.0 0.04 20 2 0…60 20046581  20072644  G ¼ 2.0 0.12 20 2 0…30 20046582  20072648  3.0 0.23 20 2 0…10 20046583  20072653  4.0 0.30 20 2 0…4 20046584  20072657  6.0 0.55 20 2 0…1 20046585  20072661  CF B 2/2-way solenoid valve Direct-acting Normally open 2 (B) 1 (P) G ⅛ 1.0 0.04 20 2 0…40 20046612  20046630  G ¼ 2.0 0.12 20 2 0…16 20046613  20046631  3.0 0.23 20 2 0…8 20046615  20046632  4.0 0.30 20 2 0…4 20046616  20046633  6.0 0.55 20 2 0…2 20046617  20046634  X: on request

8 | 17 Kick and Drop coilsVisit product website  4.5. Ordering chart for Type 6014 with Kick and Drop coil The Type 6014 valve is a direct-acting 3/2-way plunger valve. The Kick and Drop coil enables the holding power to be reduced to up to 10 watts, depending on the version. Note: For more information on the solenoid valve, see data sheet Type 6014 Further variants with stainless steel body without short circuit ring, alternative voltages, NPT or RC internal threads, as flange version or other seal materials available on request. Circuit function Port con- nection Orifice KV value water Coil power Pressure range Article no. Inrush power Holding power AC/DC 230…240/AC [mm] [m 3/h] [W] [W] [bar] [V/Hz] [V/Hz] Brass body, G internal thread, seal material FKM/FKM CF C 3/2-way solenoid valve Direct-acting Normally closed 2(A) 1(P) 3(R) G ⅛ 1.5 0.07 20 2 0…16 20046635  20046663  G ¼ 2.0 0.11 20 2 0…10 20046636  20046664  2.5 0.16 20 2 0…6 20046637  20046665  3.0 0.2 20 2 0…4 20046638  20046666  CF D 3/2-way solenoid valve Direct-acting Normally open 2(B) 1(P) 3(R) G ⅛ 1.5 0.07 20 2 0…16 20046639  20046667  G ¼ 2.0 0.11 20 2 0…10 20046640  20046668  2.5 0.16 20 2 0…6 20046641  20046669  3.0 0.2 20 2 0…4 20046642  20046670 

9 | 17 Kick and Drop coilsVisit product website  4.6. Ordering chart for Type 6026 with Kick and Drop coil The Type 6026 valve is a direct-acting, media-separated 2/2-way plunger valve. Note: For more information on the solenoid valve, see data sheet Type 6026 Further variants with brass body without short circuit ring, alternative voltages, NPT or RC internal threads, as flange version or other seal materials available on request. Circuit function Port con- nection Orifice KV value water Coil power Pressure range Article no. Inrush power Holding power AC/DC 230…240/AC [mm] [m 3/h] [W] [W] [bar] [V/Hz] [V/Hz] Stainless steel body, G internal thread, seal material PTFE CF A 2/2-way solenoid valve Direct-acting Normally closed 2 (A) 1 (P) G ¼ 4.0 0.5 44 6.5 0…10 20047000  20047091  6.0 0.8 44 6.5 0…10 20047001  20047098 

10 | 17 Kick and Drop coilsVisit product website  4.7. Ordering chart for Type 6027 with Kick and Drop coil The Type 6027 valve is a direct-acting 2/2-way plunger valve. The Kick and Drop coil enables the holding power to be reduced by up to 14 watts, and an increase in the pressure range for the normally closed version. Note: For more information on the solenoid valve, see data sheet Type 6027 Further variants with stainless steel body, alternative voltages, NPT or RC internal threads, as flange or screw-in version or other seal materials available on request. Circuit function Port con- nection Orifice KV value water Coil power Pressure range Article no. Inrush power Holding power AC/DC 230…240/AC [mm] [m 3/h] [W] [W] [bar] [V/Hz] [V/Hz] Brass body, G internal thread, seal material FKM/FKM (for orifice 12.0 mm only stainless steel body possible) CF A 2/2-way solenoid valve Direct-acting Normally closed 2 (A) 1 (P) G ¼ 3.0 0.28 44 6.5 0…30 20047349  20047359  4.0 0.54 44 6.5 0…30 20010689  20047360  G ⅜ 6.0 0.95 44 6.5 0…6 20047350  20047361  8.0 1.6 44 6.5 0…3 20047351  20047362  G ½ 10.0 1.8 44 6.5 0…2 20033786  20047363  12.0 2.0 44 6.5 0…1.2 386731  386737  CF B 2/2-way solenoid valve Direct-acting Normally open 2 (B) 1 (P) G ¼ 3.0 0.28 44 6.5 0…13 20047353  20047365  4.0 0.54 44 6.5 0…10 20047355  20047369  G ⅜ 6.0 0.95 44 6.5 0…6 20047356  20047367  8.0 1.6 44 6.5 0…3 20047357  20047369  G ½ 10.0 1.8 44 6.5 0…2 374184  20047370  12.0 2.0 44 6.5 0…1 20047358  20047371 

11 | 17 Kick and Drop coilsVisit product website  4.8. Ordering chart for Type 6213 with Kick and Drop coil The Type 6213 valve is a servo-assisted 2/2-way diaphragm valve with spring coupling of the pilot valve and diaphragm. The Kick and Drop coil enables the holding power to be reduced to up to 14 watts, depending on the version. Note: For more information on the solenoid valve, see data sheet Type 6213 Further variants with stainless steel body without short circuit ring, alternative voltages, NPT or RC internal threads, as flange version or other seal materials available on request. Circuit function Port con- nection Orifice KV value water Coil power Pressure range Article no. Inrush power Holding power AC/DC 230…240/AC [mm] [m 3/h] [W] [W] [bar] [V/Hz] [V/Hz] Brass body, G internal thread, seal material FKM/FKM CF A 2/2-way solenoid valve Direct-acting Normally closed 2 (A) 1 (P) G ⅜ 10.0 1.9 20 2 0…10 20047785  20047788  G ½ 13.0 3.6 20 2 0…10 20047786  20047789  44 6.5 20047791  20047793  G ¾ 20.0 8.3 20 2 0…10 20047787  20047790  44 6.5 20047792  20047794  G 1 25.0 11 85 8.5 0…10 20004797  20048204  G 1¼ 25.0 11 85 8.5 0…10 20048207  20048205  G 1½ 40.0 30 85 8.5 0…10 20008169  20048208  G 2 40.0 30 85 8.5 0…10 20008170  20048210 

12 | 17 Kick and Drop coilsVisit product website  4.9. Ordering chart for Type 6281 with Kick and Drop coil The Type 6281 valve is a servo-assisted 2/2-way diaphragm valve. A minimum differential pressure is required in order to function. The Kick and Drop coil enables the holding power to be reduced to up to 7 watts, depending on the version. Note: For more information on the solenoid valve, see data sheet Type 6281 Further variants with stainless steel body without short circuit ring, alternative voltages, NPT or RC internal threads, as flange version or other seal materials available on request. Circuit function Port con- nection Orifice KV value water Coil power Pressure range Article no. Inrush power Holding power AC/DC 230…240/AC [mm] [m 3/h] [W] [W] [bar] [V/Hz] [V/Hz] Brass body, G internal thread, seal material FKM/FKM CF A 2/2-way solenoid valve Direct-acting Normally closed 2 (A) 1 (P) G ¼ 10.0 1.5 12 0.6 0.2…16 20046906  – 20 2 X 20046961  G ⅜ 10.0 1.9 12 0.6 0.2…16 20046907  – 20 2 X 20046962  G ½ 13.0 3.8 12 0.6 0.2…16 20046908  – 20 2 X 20046963  G ¾ 20.0 8.5 12 0.6 0.2…16 20046909  – 20 2 X 20046964  G 1 25.0 12 12 0.6 0.2…16 20046910  – 20 2 X 20046965  G 1¼ 40.0 23 12 0.6 0.2…16 20046911  – 20 2 X 20046966  G 1½ 40.0 30 12 0.6 0.2…16 20046912  – 20 2 X 20046967  G 2 50.0 40 12 0.6 0.2…16 20046913  – 20 2 X 20046968  G 2½ 50.0 40 12 0.6 0.2…16 20046914  – 20 2 X 20046969  CF B 2/2-way solenoid valve Direct-acting Normally open 2 (B) 1 (P) G ¼ 10.0 1.5 20 2 0.2…16 20046924  20046970  G ⅜ 10.0 1.9 20 2 0.2…16 20046925  20046971  G ½ 13.0 3.8 20 2 0.2…16 20046927  20046972  G ¾ 20.0 8.5 20 2 0.2…16 20046928  20046973  G 1 25.0 12 20 2 0.2…16 20046929  20046974  G 1¼ 40.0 23 20 2 0.2…16 20046930  20046975  G 1½ 40.0 30 20 2 0.2…16 20046931  20046976  G 2 50.0 40 20 2 0.2…16 20046932  20046978  G 2½ 50.0 40 20 2 0.2…16 20046933  20046979  X: on request

13 | 17 Kick and Drop coilsVisit product website  4.10. Ordering chart for Type 5404 with Kick and Drop coil The Type 5404 valve is a servo-assisted 2/2-way piston valve. A minimum differential pressure is required in order to function. The Kick and Drop coil enables the holding power to be reduced to up to 9 watts, depending on the version. Note: For more information on the solenoid valve, see data sheet Type 5404 Further variants without short circuit ring, alternative voltages, NPT or RC internal threads, as flange version or other seal materials available on request. Circuit function Port con- nection Orifice KV value water Coil power Pressure range Article no. Inrush power Holding power AC/DC 230…240/AC [mm] [m 3/h] [W] [W] [bar] [V/Hz] [V/Hz] Brass body, G internal thread, seal material PTFE/FKM CF A 2/2-way solenoid valve Direct-acting Normally closed 2 (A) 1 (P) G ½ 12.0 2 12 0.6 1…50 20047544  – 20 2 X 20047551  G ¾ 20.0 7 12 0.6 1…25 20047545  – 20 2 X 20047552  G 1 25.0 10 12 0.6 1…25 20047546  – 20 2 X 20047554  CF B 2/2-way solenoid valve Direct-acting Normally open 2 (B) 1 (P) G ½ 12.0 2 20 2 1…32 20047547  20047555  G ¾ 20.0 7 20 2 1…25 20047548  20047559  G 1 25.0 10 20 2 1…25 20047550  20047560  X: on request

14 | 17 Kick and Drop coilsVisit product website  4.11. Ordering chart for Type 6240 with Kick and Drop coil The Type 6240 valve is a servo-assisted 2/2-way piston valve with spring coupling of the pilot valve and piston. The Kick and Drop coil enables the holding power to be reduced by up to 14 watts, and an increase in the pressure range, depending on the version. Note: For more information on the solenoid valve, see data sheet Type 6240 Further variants with brass body, alternative voltage, NPT or RC internal threads, as flange or cartridge version or other seal mate rials available on request. Circuit function Port con- nection Orifice KV value water Coil power Pressure range Article no. Inrush power Holding power AC/DC 230…240/AC [mm] [m 3/h] [W] [W] [bar] [V/Hz] [V/Hz] Stainless steel body, G-internal thread, seal material FKM/FKM CF A 2/2-way solenoid valve Direct-acting Normally closed 2 (A) 1 (P) G ¼ 6.0 0.6 20 2 0…25 20047418  20047420  G ⅜ 6.0 0.6 20 2 0…25 20047419  20047421  G ½ 12.0 2.2 44 6.5 0…25 20047422  20047423 

15 | 17 Kick and Drop coilsVisit product website  4.12. Ordering chart for Type 6407 with Kick and Drop coil The Type 6407 valve is a servo-assisted 2/2-way piston valve with fixed coupling of the pilot valve and piston. The Kick and Drop coil enables the holding power to be reduced to up to 14 watts. Note: For more information on the solenoid valve, see data sheet Type 6407 Further variants without short circuit ring, alternative voltages, NPT or RC internal threads, as flange version or other seal materials available on request. Circuit function Port con- nection Orifice KV value water Coil power Pressure range Article no. Inrush power Holding power AC/DC 230…240/AC [mm] [m 3/h] [W] [W] [bar] [V/Hz] [V/Hz] Brass body, G internal thread, seal material FKM/FKM CF A 2/2-way solenoid valve Direct-acting Normally closed 2 (A) 1 (P) G ½ 13 3.7 44 6.5 0…10 20047532  20047535  G ¾ 20 5.6 44 6.5 0…10 20047533  20047536  G 1 25 10.0 44 6.5 0…10 20047534  20047537 

16 | 17 Kick and Drop coilsVisit product website  4.13. Ordering chart for accessories Cable plug Type 2518, form A according to DIN EN 175301 - 803 Note: For further versions see data sheet Type 2518 Cable plug Dimensions Version Voltage Article no. ca. 51 35.7 3.5 1.5 29.2 Ø 19 29.2 Without circuitry (AC/DC) 0…250 V AC/DC 314802  With LED (AC/DC) 12…24 V AC/DC 314812  With LED and varistor (AC/DC) 12…24 V AC/DC 314820  Without circuitry (AC/DC) with silicone seal for higher ambi- ent temperature, e.g. steam version (NA07) 0…250 V AC/DC 361687  Cable plug Type 2509, form A according to DIN EN 175301 803 Note: Without circuitry (Standard) For more information on the cable plug, see data sheet Type 2509 Cable plug Dimensions Version Voltage Article no. 0.71 0.71 1.10 1.28 2.32 1.28 0.17 0.04 1.10 NPT ½ Ø 1.02 2 1 Without circuitry 0…250 V AC/DC 137943 

Bürkert – Close to You Austria Belgium Czech Republic Denmark Finland France Germany Italy Netherlands Norway Poland Spain Sweden Switzerland Turkey United Kingdom China Hong Kong India Japan Korea Malaysia Philippines Singapore Taiwan South Africa United Arab Emirates Brazil Uruguay Canada USA Australia New Zealand Credits, © and concept: Christian Bürkert GmbH & Co. KG | Photographs: Marc Eggimann Fotografie - 4051 Basel | Scanner GmbH - Werbeagentur Künzelsau -

74653 Künzelsau

www.burkert.com