600ACP GAPTEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 1 of 3 600ACP_SCF – Rev. 2020-1.0 Specifications subject to change without notice. 600ACP_SCF Series 600W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated High efficiency up to 93.8% Universal AC input range (85~264VAC) Built-in Active PFC function, PF>0.95 Short circuit protection (SCP) Over voltage protection (OVP) Over load protection (OLP) Short circuit protection (SCP) Wide operating ambient temperature (-20°C~70°C) Operating altitude up to 5000M 100% full load burn-in test PCB soldering side with conformal coating AC-DC Converter 600 Watt The 600ACP_SCF series features standard rail mounting, energy efficien- cy and is highly cost-effective. The series offers stability and high noise immunity especially for industrial control equipment, machinery and other demanding environments for industri al equipment. This converter offers a compact and light weight design with and standard rail installati- on (35mm). Furthermore this series offers Easy Fuse Tripping due and a built-in DC OK relay contact. The converter can be installed on TS-35/7.5 or TS-35/15. Example: 600ACP_24SCF 600 = 600Watt AC = AC-DC P = series 24 = 24 Vout S = Single Output C = PFC (Power Factor Correction) F = Fan Input specifications Input voltage range 90~264VAC Input frequency 47~63Hz Power factor 12V only @230VAC 115VAC 0.98 (typ) 230VAC 0.95 (typ) AC current • 12V

  • 24V/48V 5A (max) 6A (max) Inrush current Cold start
  • 12V
  • 24V/48V 115VAC 15A (typ) 220VAC 40A (typ) 30A (typ) Leakage current Input—output: ≤0.25mA Input—PG: ≤3.5mA (264Vac, 63Hz) Standy power consumption <5W Output specifications Item Test conditions Min Typ Max Units Output voltage accuracy Full load
  • 12V
  • 24V/48V Line regulation • 12V
  • 24V/48V ±0.5 Load regulation • 12V
  • 24V/48V Set-up time • 12V @220VAC input
  • 24V/48V @220VAC input
  • 24V/48V @110VAC input 1.5 2.5 s s s Hold-up time 220VAC @full load 10 ms Overshoot and undershoot 5 % Switching frequency 100 KHz * Measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1 uF & 10uF parallel capacitor. Protection specifications Over-load protection Protection type: 12V: Intermittent working, working time>0.1s, recovery time >2s 24V/48V: Hiccup mode, auto recovery Over-voltage protection 12V: 13.6~16V; 24V: 28~32V; 48V: 54~60W Protection type: Constant voltage, auto recovery Over-temperature protection 95°C+5°C (detect on thermal protector on PFC mosfet); shut down,auto recovery after the temperature goes down to 40°C Common specifications Short circut protection: Long-term mode, automatic recovery Temperature rise at full load: 40°C MAX Cooling method*: Fan Operation temperature range: -20°C~+70°C Storage temperature range: -40°C ~+85°C Storage humidity range: 10%~95%, no condensing Temperature coefficient: 0.03%/°C MAX MTBF (using MIL-HDBK-217F): +25°C >200,000 hours Power boost: 150% of rated current Parallel function: support Safety standards: UL60950-1 2nd Ed; IEC 60950-1:2005 (2nd Ed); EN60950-1:2006 Case material: Heat-resistant Plastic (UL94-V0) and metal Dimensions: 218*116.5*40.7mm Weight: 1333.33g 12V Fan working: temperature ctrl. up to 55±10°C or output current >17-22A Fan stop working: temperature ctrl. down to 40±10°C or output current<15-20A 24V/48V Fan working: temperature ctrl. up to 55±10°C or output current > 40%~60% of rated current Fan stop working: temperature ctrl. down to 40±10°C or output current<30%~50% of rated current Isolation specifications Item Test condition Min Typ Max Units Withstand voltage* • Primary-Sec.: 10mA
  • Primary-PG: 10mA
  • Secondary-PG 3000 1500 500 VAC Isolation resistance 10 MΩ * Input-Output, tested for 1 minute, 500VDC and leakage current less than 1mA Note: 1. All parameters NOT specially mentioned are measured at rated input, rated load and 25°C of ambient temperature. UL-60950-1 (E347551)

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 2 of 3 600ACP_SCF – Rev. 2020-1.0 Specifications subject to change without notice. 600W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated 600ACP_SCF Series Mechanical dimensions EMC specifications EMC / Conduction & Radiation Compliance to EN55022, FCC PART 15, Class B EMC / Harmonic Current Compliance to EN61000-3-2, class D EMC / Immunity Compliance to EN61000-4-2, -3, -4, -5, -6, -8, -11; heavy industry level The power supply is considered as a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. Approval Model Power [W] Output [Vo, VDC] Rated Current [A] 90-175VAC 176-264VAC Voltage Adj. Range [V] Ripple&Noise* [mV, typ] 0~70°C -20~0°C Efficiency [%, min] UL 600ACP_12SCF 600 12 35 50 11.8~13.2 ≤120 ≤240 90 UL 600ACP_24SCF 600 24 20 25 23.4~26.4 ≤150 ≤240 91.8 UL 600ACP_48SCF 600 48 10 12.5 47.5~52.8 ≤480 ≤480 93.8 Measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1 uF & 10uF parallel capacitor.

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 3 of 3 600ACP_SCF – Rev. 2020-1.0 Specifications subject to change without notice. 600W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated 600ACP_SCF Series Typical characteristics Functional block diagram Derating Curves Input (VAC) Input (VAC) Ambient temperature (°C) Ambient temperature (°C) Load (A)Load (A) Load (A) Load (A) Block diagram