SB175 APP | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 9

Technical content

  • 88 - All Data Subject To Change Without Noticewww.andersonpower.com Top View Side View [ 25.4 ] 1.00 [ 39.7 ] 1.56 [ 79.4 ] 3.13 [ 28.6 ] 1.13 Housing marking specifying 1328G1 contact ONLY SB® 175 ORDERING INFORMATION SB® 175 Connectors Up to 280 Amps SB® 175 Standard Housings The second to largest SB® housings work with wire contacts up to 1/0 AWG (50 mm²) as well as busbar contacts. Genderless design mates with itself. Mechanical keys are color-coded. NOTE: SB® 175 black housing is keyless and can be mated with all other colors.

Description

Y ellow 943-BK 943 Orange 942-BK 942 Red 949-BK 949 Gray 940-BK 940 Blue 941-BK 941 Black (Keyless) 2-7252G1 SB® 175 Chemical Resistant Housings Same features as the Standard SB® 175 but molded in a chemical resistant PBT/ PC blend. Suitable for use to -40°C. SB® 175 2/0 Housing Genderless design mates with itself. Can be cross mated with gray SB® 175 housing, but amperage capability is limited to the SB® 175 rating with the wire and contact used. Voltage Wires sizes from 10 to 1/0 AWG (5.3 to 50 mm²) fit in the second to largest connector in the SB ® series. The 3 pole SB® 175 adds an additional position for power or grounding. All Multipole wire connector housings are genderless and mate to themselves minimizing inventory and assembly complexity.

  • Silver Plated Wire Contacts up to 1/0 (50 mm²) Allows UL rated currents up to 280 amps
  • Chemical Resistant Housing Option Extends temperature range down to -40°C, while offering enhanced UV and chemical resistance
  • UL Rated for Hot Plugging up to 100 Amps Great for battery or other applications where the ability to interrupt circuits is required Mated Length Bottom View [ 133.4 ] 5.25 Material ID P = Chemical Resistant [ 55.6] 2.19 [ 25.4 ] 1.00 [ 79.6 ] 3.13 [ 6.5 ] Ø 0.26 (2) PLC’S [ 28.6 ] 1.13 [ 11.3 ] 0.45 SB® 175

2 Pole

3 Pole

  • 89 - All Data Subject To Change Without Notice www.andersonpower.com SB® 175 3 Pole Housings & Hardware A three pole version of the standard SB® 175 housing has a two piece housing with springs and hardware. Useful for DC 2 wire plus ground and AC single phase applications.

Gray Housing and Hardware Kit 902 Gray Housing Top Half 2-5048 Gray Housing Bottom Half 2-5049 Hardware Kit 10G34 SB® 175 Silver Plated Wire Contacts Silver plated contacts offer superior electrical performance and durability up to 10,000 mating cycles. See reducing bushings in accessory section for smaller wires. Dimensions Mating Loose Piece A - - B - - C - - D - A WG mm² Force Part Numbers inches mm inches mm inches mm inches mm Minimum Quantity 500 53.5 High 1382-BK 1382 2.35 59.69 0.52 13.21 0.44 1.18 1.04 26.42 42.4 High 1347-BK 1347 2.35 59.69 0.52 13.21 0.39 9.91 1.04 26.42 33.6 High 1383-BK 1383 2.35 59.69 0.52 13.21 0.35 8.89 1.04 26.42 21.1 High 1384-BK 1384 2.35 59.69 0.52 13.21 0.30 7.62 1.04 26.42 13.3 High 1348-BK 1348 2.10 53.34 0.37 9.40 0.22 5.59 0.80 26.42 2/0 * Low 1328G1-BK 1328G1 2.35 59.69 0.64 16.26 0.49 12.45 1.04 26.42 * Use with 115107G1 only SB® 175 Silver Plated Busbar Contacts Provides a quick disconnect input or output busbar connection. Busbar contacts are for mating with wire contacts only. Part number 180BBS includes lock nuts. Locknuts must be ordered separately for 180BBS-BK. Mating T ype Thread Force Loose Piece Part Numbers Minimum Quantity 1,000 120 Busbar 1/4-20 High 180BBS-BK 180BBS Lock Nut 1/4-20 H1216P7 10G56 10G55 Silver Plated Wire Contacts - use with 2/0 Housing ONLY Silver plated contacts offer superior electrical performance and durability up to 5,000 mating cycles. Dimensions A - - B - - C - - D - T ype A WG mm² Loose Piece Part Numbers inches mm inches mm inches mm inches mm Minimum Quantity 300 Individual 1328G1-BK 1328G1 2.35 59.69 0.64 16.26 0.49 12.45 1.04 26.42 [ 79.4 ] 3.13 [28.6] 1.13 [ 11.7 ] 0.46 [ 6.7 ] Ø 0.27 (4) [ 28.6 ] 1.13 [ 82.6 ] 3.25 [ 26.2 ] 1.03 [ 25.4 ] 1.00 Top View Side View See Busbar contact drawing on website for further detail. B [ 109.0 ] 4.29 [ 25.4 ] 1.0[ 12.7 ] 0.5 [ 4.57 ] 0.18 #¼- 20 THD [ 12.7 ] 0.50B C AD [ 12.7 ] 0.50 B A D C SB® 175

  • 90 - All Data Subject To Change Without Noticewww.andersonpower.com SB® 175 Current - Temperature Derating per IEC 60512-5-2 Test 5B SB® 175 CONNECTOR TEMPERATURE CHARTS - Temperature rise charts are based on a 25°C ambient temperature. 100 125 SB® 175 Derating vs. Ambient Temperature Amperes Applied 1/0 AWG 1 AWG

2 AWG 4 AWG

0 25 50 75 100125 150175200225250 300275 Ambient Temperature (°C) SB® 175 Temperature Rise at Constant Current 0 25 50 75 100125150175200225250 Amperes Applied 1/0 AWG 1 AWG Above Ambient (°C) 100 125 0 50 100 150 200 250 300 Temperature (°C) SB® 175 2/0 Derating vs. Ambient Temperature Amperes Applied 2/0 70 mm Amperes Applied 2/0 70 mm Temperature (°C) SB® 175 2/0 Temperature Rise at Constant Current 0 50 100 150 200 250

  • 91 - All Data Subject To Change Without Notice www.andersonpower.com SB® 175 CONNECTOR SPECIFICATIONS NOTE 1: See IEC 60664-1 for working voltage. NOTE 2: Amp ratings are stated per position and based on all positions being fully loaded. 1 - Based on: 105°C rated or better cable of the largest size. Properly calibrated APP® recommended tooling, and a 25°C ambient temperature. UL rating not to exceed the maximum operating temperature. CSA rating below a 30°C temperature rise. 2 - Limited by the thermal properties of the connector plastic housing. 3 - Use APP® recommended tooling only. Alternate tools may adversely affect the performance of our connectors along with UL and CSA recognition. 4 - Tested with contact part number 1382. MECHANICAL Wire Size Range AWG mm² Wire Contacts with Bushings 10 to 1/0 5.3 to 53.5 Max. Wire Insulation Diameter in. mm 0.600 15.240 Operating Temperature ² °F °C Standard -4° to 221° -20° to 105° Chemical Resistant -40 to 221° -40° to 105° Mating Cycles No Load by Plating Silver (Ag) Wire and Busbar Contacts 10,000 Avg. Mating / Unmating Force Lbf. N

2 Pole 25 111

3 Pole 35 156

Min. Contact / Spring Retention Force Lbf. N 150 667 Mechanical Shock 4 MIL-STD-202 213 Condition A 50g’s Vibration High Frequency 4 MIL-STD-202 204 Condition A 10g’s MATERIALS Housing Standard Plastic Resin Polycarbonate Chem. Resistant Resin Polycarbonate / PBT blend Contact Retention Spring Stainless Steel Housing Flammability Rating UL94 V-0 Glow Wire 960°C (GWFI) / 850°C (GWIT) Wire & Busbar Contacts Base Copper Alloy Plating Silver Contact Termination Methods Crimp ³ Wire Contacts Hand Solder Wire Contacts Wrench / Socket Busbar Contacts Only ELECTRICAL Current Rating Amperes ¹ UL 1977 CSA Wire-to-Wire (1/0 AWG) 280 175 Wire-to-Busbar (1/0 AWG) 200

3 Pole Wire-to-Wire (1/0 AWG) 175

Dielectric Withstanding Voltage Volts AC 2,200 Avg. Mated Contact Resistance Milliohms ¹ 6” of 1/0 AWG wire 0.100 Hot Plug Current Rating Amperes - Wire & Busbar 250 cycles at 120V DC 1/0 Wires 100A SB® 175

  • 92 - All Data Subject To Change Without Noticewww.andersonpower.com SB® 175 ¹ Based on: 105°C rated or better cable of the largest size. Properly calibrated APP® recommended tooling, and a 25°C ambient temperature. UL rating not to exceed the maximum operating temperature. CSA rating below a 30°C temperature rise. ² Limited by the thermal properties of the connector plastic housing. ³ Use APP ® recommended tooling only. Alternate tools may adversely affect the performance of our connectors along with UL and CSA recognition. MATERIALS Standard Housing PC Flammability Rating UL94 V-0 Wire Power Contact Copper Alloy, Silver Plate Contact Termination Methods Crimp 3 Hand Solder MECHANICAL Contact Wire Range (AWG) 2/0 (mm²) 70 MAX Wire Insulation Diameter (in) 0.67 (mm) 17.04 Operating Temperature 2 °C °F PC Housing -20° to 105° -4° to 221° AVG Contact Retention Force for Standard PC Housing (lbf) (N) 150 lbf 667 n Mating Cycles (no load) 5,000 Connector AVG Connect / Disconnect (lbf) 55 (N) 245 ELECTRICAL Current Rating (Amperes) 1 UL 1977 CSA 2/0 AWG 340 200 70 mm² 315 185 Voltage Rating (AC/DC) 600 Dielectric Withstanding Voltage (AC) 2,200 AVG Contact Resistance (milli-ohms) 1 0.045 SB® 175 2/0 CONNECTOR SPECIFICATIONS SB® 175 CONNECTOR IEC INFORMATION ATTRIBUTES SB® 175 AMP Rating AC/DC 175 Voltage Rating AC/DC (Steady State) 500 V AC/DC (Operational) Breaking Capacity - AMP Rating / Cycles 175 Amp / 10 Cycles Voltage Rating (Breaking Capacity) 220 VDC Finger Safety - Mated Only IEC 60529 - IP20 Wire Size Tested 50 mm² Contact Series Tested 1382 Climatic Testing (Cold, Heat & MFG) IEC 60512 Test -11j, 11i & 11g Cycle Life IEC 60512 Test 9a - 5000 Cycles Mechanical Strength Impact IEC 60512-5 @ 29.5 Inches - Dropped 8 Times Temperature Range -20 °C to 105 °C -4 °F to 221 °F PROTECTION Touch Safety with Wire Contacts IEC 60529 IP10 unmated Environmental Sealing with Boots IEC 60529 IP64 Connector Series Configurations Creepage / Clearance per IEC 60950-1 Material Group SB® 175 Unmated 5.73 mm IIIa Mated 5.73 mm
  • 93 - All Data Subject To Change Without Notice www.andersonpower.com SB® 175 ACCESSORIES Slide cover over mating end. 995G1 945G3 945946G1 "A" Frame Handle (not included). (not included). "A" Frame Handle The given wire O.D. information is an estimate. Cable clamps should be evaluated for performance with the actual wire to be used. Cable Clamps Durable metal cable clamps securely hold cables to prevent accidental strain or pulls from dislodging wire or contacts from the housing. Only Bolt On type clamps can be used with the handles. Cable clamps are recommended for solder terminated wires. Not for use with 3 pole housing. Cable Size Max / Min In. Max / Min mm

Inches O.D. mm O.D. Part Numbers Minimum Quantity 100 Self Attaching for Discrete Conductor 0.55 to 0.24 14 to 6 105G3 945 Bolt On for Discrete Conductor 0.66 to 0.24 16.7 to 6.2 945G3-BK 945G3 Bolt On for Bundled Conductor 0.75 to 0.29 18.3 to 7.3 946G1-BK 946G1 Torque value 30 (in - lbs) / 3.4 (Nm) NOTE: For assembly of clamp to housing only Handles Handles are made out of durable PC plastic. Hardware to attach to connector body included in kits. Not for use with 3 pole housing. Des cription Part Numbers Minimum Quantity 100 Gray Handle Kit 995G1 Red Handle Kit 995G3 Handle Only , Gray 3-5074P1 Handle Only , Red 3-5074P3 Handle Only , Black 3-5074P5 Hardware Bag 105G8 Torque value 30 (in lbs) / 3.4 (Nm) NOTE: For assembly of clamp to housing only Dust Cover Prevents dust and dirt from entering the mating interface of the connector when unmated. NOTE: Not a Hermetic Seal. Not for use with 3 pole housing. De scription Part Numbers Minimum Quantity 500 Dust Cover with Lanyard Strap, Red 13890P2 134G2 SB® 175

  • 94 - All Data Subject To Change Without Noticewww.andersonpower.com SB® 175 Connector not included. Mounting Plate Hardware SB® 175 SB® Environmental Boots SB® Environmental Boots provide water, dirt, chemical and UV protection for SB® 175 connectors. The durable boots shield the connectors from water and dirt to IP64* in both the mated and unmated condition. Dimensions A - - B - - C -

in. mm in. mm in. mm Minimum Quantity 250 SB® 175 Environmental Boot, Load 3-6037P1-BK 3-6037P1 9.5 241 3.2 80 9.3 236 SB® 175 Environmental Boot, Source 3-6036P1-BK 3-6036P1 9.5 241 3. 2 80 9.3 236 * IP64 test pending SB® 175 Lockout Works with standard lockout - tagout equipment to prevent access to the mating interface of the connector. Made from durable PC plastic. Can be used with 3 pole housing to lockout positive and negative positions only. Manual Release Bracket - Mounting Side * Works with the Locking Side to ease mating and unmating connectors. Not for use with 3 pole housing. Mounting Plate and Hardware Kit 924G1 Torque value 30 (in - lbs) / 3.4 (Nm) NOTE: For assembly of bracket to housing only Manual Release Bracket - Locking Side * Works with the Mounting Side to ease mating and unmating connectors. Not for use with 3 pole housing. Cable Size Max / Min Max / Min Inches O.D. mm O.D. Part Number Minimum Quantity Locking plate, handle, clamp and hardware kit. 0.50 to 0.21 12.6 to 5.4 923G1 Torque value 30 (in - lbs) / 3.4 (Nm) NOTE: For assembly of bracket to housing only The given wire O.D. information is an estimate. Cable clamps should be evaluated for performance with the actual wire to be used. A B C [ 90 ] 3.5

  • 95 - All Data Subject To Change Without Notice www.andersonpower.com ID Wire Entrance [ 25.4 ] 1.00 Reducing Bushings: for Use with Contact Part Number 1382 Use with contact part number 1382-BK to allow a smaller wire to be used with the connector. Electrical capability is derated with smaller wire. Dimensions Contact Barrel Size Wire Size - ID - A WG mm² A WG mm² Part Numbers inches mm Minimum Quantity 1,500 1,000 500 100 1/0 53.5 1 42.4 5687-BK 5687 0.39 9.91 1/0 53.5 2 33.6 5690-BK 5690 0.34 8.64 1/0 53.5 4 21.2 5693-BK 5693 0.27 6.86 1/0 53.5 6 13.3 5663-BK 5663 0.22 5.59 1/0 53.5 10 to 8 5.3 to 8.4 5648-BK 5648 0.19 4.83 SB® 175
  • 101 - All Data Subject To Change Without Notice www.andersonpower.com Wire Size Loose Piece Part Number Loose Piece Contact Crimp Tools AWG mm² Silver Plating Hand Tool OR Pneumatic Tool + Die + Locator Number of Crimps SB® 50 6 13.3 1307 1309G4 1387G1 1388G6 1389G6 Single 5900 8 8.4 5952 10 to 12 5.3 to 3.3 5953 1388G7 1389G7 5915 SB® 120 1 42.4 1323G1

1368 Series 1387G1

2 33.6 1319 1388G44 21.2 1319G4 6 13.3 1319G6 SB® 175 1/0 53.5 1382

1368 Series

1387G2 1303G13 1304G32 Double 1 42.4 1347 2 33.6 1383 4 21.1 1384 6 13.3 1348 1387G1 1388G4 1389G3 Single SB® 350 350 mcm 185 910 4/0 107.2 908 1387G2 1303G3 1304G31 3/0 85 916 1303G122/0 67.4 907 1/0 53.5 917 NOTE: See website for the most current information. SB® Tooling Information SB® 2/0 Tooling Information Wire Size Loose Piece Part Number Loose Piece Contact Crimp Tools AWG mm² Silver Plating Hand Tool OR Pneumatic Tool + Die + Locator Number of Crimps 2/0 53.5 1328G1 1368 1387G2 1303G12 1304G32 Double NOTE: See website for the most current information. SB® TOOLING Your Best Connection™ 2020-0055 DS-SB175 REV C7 Anderson™ will use reasonable efforts to include accurate and up-to-date content in the data sheet. All product information contained in the data sheet including ordering information, illustrations, specifications, and dimensions, are believed to be reliable as of the date of publishing, but is subject to change without notice. Anderson™ makes no warranty or representation as to its accuracy. Content in the data sheet may contain technical inaccuracies, typographical errors and may be changed or updated without notice. Anderson™ may also make improvements and/or changes to the products and/or to the programs described in the content at any time without notice. Current sales drawings and specifications are available upon request. ©2020 Anderson Power Products, Inc. All rights reserved. APP®, A®, Anderson Power Products®, SB® and the APP Logo are registered trademarks of Anderson Power Products, Inc. Anderson™ and Your Best Connection™ are trademarks of Anderson Power Products, Inc.